kkarlsen Posted June 30, 2022 Share Posted June 30, 2022 Although I have a lot of projects lingering in the background, I have decided to move this one 'up the ladder'. I really wanted to wrestle with this 'Silver Spitfire' when it went around the world in 'The longest flight. But now I have learned that it has come into Danish hands, by Blackbird AIR A/S in Billund. And I also know the danish Pilot who is flying it Casper (PEL)! At the Danish AIR Show I had the opportunity to watch the presentation of the 'Silver Spitfire'. Completely overshadowing the entire show for me, at least. A couple of years I was able to secure the decal from Draw Decal fro the Silver Spitfire. So on to the project, the Revell kit of the Spitfire Mk. IX will be the base kit for this build + the Brassin resin cockpit. But most of all It will involve trying to recreate the polished aluminium surfaces. There has also been a few modifications after it has been around the world. The long range fuel tank has been removed, and I can also see there has been a change of the rudder. I want to 'backdate' it to when it returning from 'the longest flight' back in 2019. Casper has promised me to go and have a 'look see' at some point in Billund Right now it is back in Chichester at the Goodwood Aerodrome for an overhaul... Cheers: Kent HB252, Mark_C, Greg W and 21 others 24 Link to comment Share on other sites More sharing options...
themongoose Posted June 30, 2022 Share Posted June 30, 2022 Lots of for this one! kkarlsen and Martinnfb 2 Link to comment Share on other sites More sharing options...
kkarlsen Posted June 30, 2022 Author Share Posted June 30, 2022 (edited) So the research of the cockpit has started... An iPad instead of a Gunsight! I have no clue what this is but I'm assuming it has something to do with navigation, I can see a Garmin! And.. perhaps I can have a little help here, with the box behind the head armor... The long range fuel tank filler modification... Cheers: Kent Edited June 30, 2022 by kkarlsen Greg W, scvrobeson, Martinnfb and 12 others 15 Link to comment Share on other sites More sharing options...
Dpgsbody55 Posted June 30, 2022 Share Posted June 30, 2022 55 minutes ago, kkarlsen said: I have no clue what this is but I'm assuming it has something to do with navigation, I can see a Garmin! The screen is a Garmin GTN650 GPS/Nav/Comms unit. The lower Garmin unit is for radio & comms selection. These units are very commonplace nowadays, and many jurisdictions make these type of things a mandatory fitting. https://www.garmin.com/en-US/p/606906 Perhaps you can find someone who will make suitable decals for this build, unless you can print them yourself. Cheers, Michael Martinnfb and kkarlsen 2 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted June 30, 2022 Share Posted June 30, 2022 3 hours ago, Dpgsbody55 said: Perhaps you can find someone who will make suitable decals for this build, unless you can print them yourself. Check out the first post; he already has them. Kev Martinnfb and kkarlsen 2 Link to comment Share on other sites More sharing options...
Alain Ayerra Posted June 30, 2022 Share Posted June 30, 2022 Great scheme for a Spit! I like the grace full lines of the spitfire but I don't like the cammo birds, so I build mostly civil and yellow wings era planes, this one deserves a bare metal foil for finish. Great project! Link to comment Share on other sites More sharing options...
kkarlsen Posted July 1, 2022 Author Share Posted July 1, 2022 Starting with the wings: The bottom wings have had all their shell ejector openings filled in. A couple of bulges has been replicated. Next up the top wing fuel tanks. The panel with the gun bulge has been replaced with a plain one without any bulges. The fuel 'cells' Closeup of the scratched filler caps. Cheers: Kent Model_Monkey, Alex, geedubelyer and 19 others 22 Link to comment Share on other sites More sharing options...
geedubelyer Posted July 1, 2022 Share Posted July 1, 2022 Fascinating and worthy project Kent. I am enjoying this already and like to see the contemporary modifications. Cheers. Martinnfb and kkarlsen 1 1 Link to comment Share on other sites More sharing options...
Ol' Scrapiron Posted July 1, 2022 Share Posted July 1, 2022 I was lucky enough to catch Spitfire Mk IX MJ271 (G-IRTY) when it was at (relatively) nearby Paine Field in Sept 2019 during the world-round trip. Did not get to see it fly, but was able to spend some time in the hangar while maintenance was being done. Maybe one of my shots will be of some benefit to your project. - - - - - - - - - - - - - - - - - - - - - And of course a selfie to celebrate the opportunity of photographing such a worthy warbird! Hopefully something here will be of benefit to you or someone else building a Spitfire project. chuck540z3, LSP_Kevin, Rick Griewski and 23 others 24 2 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted July 1, 2022 Share Posted July 1, 2022 Fantastic photos there, Steve! Kev airscale, Ol' Scrapiron, Martinnfb and 2 others 5 Link to comment Share on other sites More sharing options...
kkarlsen Posted July 1, 2022 Author Share Posted July 1, 2022 (edited) 11 hours ago, Ol' Scrapiron said: I was lucky enough to catch Spitfire Mk IX MJ271 (G-IRTY) when it was at (relatively) nearby Paine Field in Sept 2019 during the world-round trip. Did not get to see it fly, but was able to spend some time in the hangar while maintenance was being done. Maybe one of my shots will be of some benefit to your project. Hopefully something here will be of benefit to you or someone else building a Spitfire project. Thank you Steve, there's always some detail you can't see clearly. These photos of the 'Silver Spitfire' are going to help me a lot!! Cheers: Kent Edited July 1, 2022 by kkarlsen airscale, vvwse4, Martinnfb and 1 other 4 Link to comment Share on other sites More sharing options...
kkarlsen Posted July 18, 2022 Author Share Posted July 18, 2022 A little progress on the long range fule tanks... The tanks are made from plastic card, it's only the rough form. Cheers: Kent Greg W, Landrotten Highlander, Gazzas and 18 others 21 Link to comment Share on other sites More sharing options...
brahman104 Posted July 18, 2022 Share Posted July 18, 2022 Nice one Kent! Really looking forward to seeing you tackle the polished finish on this one Craig Martinnfb 1 Link to comment Share on other sites More sharing options...
airscale Posted July 18, 2022 Share Posted July 18, 2022 1 hour ago, brahman104 said: Nice one Kent! Really looking forward to seeing you tackle the polished finish on this one Craig me too - this is going to be EPIC! Martinnfb 1 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted March 3 Share Posted March 3 Just moved this one into the Group Build at Kent's request. Kev Fanes, Martinnfb, Panzerwomble and 3 others 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now