Iain Posted February 23, 2020 Share Posted February 23, 2020 Trying to get back into actually building things again - have picked up on a Tempest I started a while back: Really enjoying this one - some very sharp/neat moulding - but parts still need test fitting and careful fettling at each stage. More shortly... Have fun. Iain Dpgsbody55, AlexM, Trak-Tor and 8 others 11 Link to comment Share on other sites More sharing options...
Iain Posted February 23, 2020 Author Share Posted February 23, 2020 Talking of fettling - here's an example - the wing root intake sections. These are separate from the wings to facilitate differing versions. Moulding looks very sharp - but alignment of parts at their edges is variable - so it's a case of aligning the parts as neatly as possible and then truing up the edges once everything has dried overnight: And that beautiful Centaurus cowling - after partial clean-up and the addition of upper and lower infil panels: Iain Biggles87, Dpgsbody55, MikeC and 5 others 8 Link to comment Share on other sites More sharing options...
Iain Posted February 23, 2020 Author Share Posted February 23, 2020 And here's where we are just now... Dry/test fit of the root intakes after clean-up. Fit is pretty good after a little fettling with a file and sharp blade. These were bonded to the rest of the airframe after the cowl had been fitted: And, after some further prep and lots of test fitting - both to the forward end of the fuselage, as well as the cowling itself: Tip: don't fit the gear door hydraulic actuators until assembly/prep of airframe is complete. Follow the instruction sequence and they are easily damaged - don't ask, I just know - OK? Damaged parts stashed away safely in a box for now... More soon... Iain Phartycr0c, MikeC, Shoggz and 15 others 18 Link to comment Share on other sites More sharing options...
wunwinglow Posted February 27, 2020 Share Posted February 27, 2020 Oooo.... Shorten the wings, lift the cockpit, big 5 bladed prop... Chek, Iain and MikeC 3 Link to comment Share on other sites More sharing options...
Out2gtcha Posted February 27, 2020 Share Posted February 27, 2020 Wow, that really looks like some slick molding Iain! Iain 1 Link to comment Share on other sites More sharing options...
Chek Posted February 27, 2020 Share Posted February 27, 2020 2 hours ago, wunwinglow said: Oooo.... Shorten the wings, lift the cockpit, big 5 bladed prop... It's the natural next step. Even type evolution thought so. Hopefully SH will as well. wunwinglow 1 Link to comment Share on other sites More sharing options...
Iain Posted February 27, 2020 Author Share Posted February 27, 2020 I believe it's on their list! Do like the Tempest II - has a very powerful, yet clean, look. I built the old Matchbox 1:72 kit a few times back in the day and always wanted to do a bigger version! Iain MikeC, Kagemusha and wunwinglow 3 Link to comment Share on other sites More sharing options...
Kagemusha Posted February 28, 2020 Share Posted February 28, 2020 Such a classic design, looking forward very much to seeing more. MikeC 1 Link to comment Share on other sites More sharing options...
Phartycr0c Posted February 28, 2020 Share Posted February 28, 2020 This should be nice! keep up the good work. MikeC 1 Link to comment Share on other sites More sharing options...
dennismcc Posted February 28, 2020 Share Posted February 28, 2020 Great looking model of a great looking subject, sadly I am still waiting for the cheaper non Hi Tec version as the subject is outside my WW2 era so I could not justify the extra expense of this version. Cheers Dennis Iain 1 Link to comment Share on other sites More sharing options...
Iain Posted March 1, 2020 Author Share Posted March 1, 2020 Alittle light sanding this weekend - followed by a little filler (white areas): Area ahead of cockpit to be sanded back in next few days... Iain GMK, Kagemusha, Landrotten Highlander and 5 others 7 1 Link to comment Share on other sites More sharing options...
themongoose Posted March 2, 2020 Share Posted March 2, 2020 This is looking great. You must have 6 rotating work benches going right now! Link to comment Share on other sites More sharing options...
Iain Posted April 10, 2020 Author Share Posted April 10, 2020 A little more progress today in the sunshine - gunsight assembled and painted, further under-wing to fuselage blending done, wing tip light covers fitted and canopies prepped: Sliding portion of canopy is tight on the rails - but it does fit! Iain Kagemusha, LSP_Kevin, Lothar and 6 others 9 Link to comment Share on other sites More sharing options...
DeanKB Posted April 10, 2020 Share Posted April 10, 2020 On 2/27/2020 at 7:10 PM, Iain said: I believe it's on their list! Do like the Tempest II - has a very powerful, yet clean, look. I built the old Matchbox 1:72 kit a few times back in the day and always wanted to do a bigger version! Iain Looks such a clean build, amazing. Link to comment Share on other sites More sharing options...
Iain Posted August 8, 2023 Author Share Posted August 8, 2023 Holy thread resurrection Batman... Trying to get some progress made/mojo re-instated - so back on this - primed and getting ready for paint, just fettling a few flaws and reinstating panel lines now: To be finished in Operation Firedog markings, as operated in Malaya (will be Dark Sea Grey rather than the Ocean Grey, and PRU Blue rather than Azure Blue, annotated here): Blue Skies! Iain Fanes, ROM, mc65 and 11 others 14 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now