ericg Posted July 26, 2017 Share Posted July 26, 2017 I have been looking for a while for my next jet project and wanted to get started on something to possibly have ready for Model Expo next year in Melbourne. A few types were considered, being this one (although in its GR1 variant), a French Crusader and an F-15 E Strike Eagle. I decided on the Tornado F3 after a conversation with my last build subject pilot, being Sean Trestrail (TTAIL) who flew the Mirage that I had depicted. His close friend flew F3's during the Gulf war for the RAF as an Aussie exchange pilot. Knowing my interest in depicting military aircraft operated by the RAAF, or military aircraft in foreign service flown by an RAAF pilot, naturally I was drawn to the subject. After some research, I decided that it was almost going to be too hard, due to the fairly extensive nature of the conversion required to change a GR1 kit to an F3. There are no commercial conversion sets available, and the trail had gone cold on a few of the cottage industry conversions out there. Luckily, I was able to have sent to me an excellent conversion set, which will form the basis of this conversion. Details of the conversion, and also the pilot will come in due course. First up, the parts! I have tried to get my hands on as much aftermarket as possible, although some of it is not suited to the F3, it will also be modified in due course. So far I have gathered: Aires Cockpit set, Aires exhausts, Master pitot tube, PHIMAT pod from an italeri Mirage IIIE, Zactomodels AIM-9L missiles and Eduard Brassin Sparrow's. I got straight into the conversion. First up was the nose. The parts that I have been supplied are 3D printed and are pretty well drop in. I have been quite pleased with how well the parts have been designed and made. The white nature of the parts means that the detail is a little hard to capture in the picture. The parts will need to be cleaned up to get rid of the layered surface but there is hardly any there such is the quality of the printer used. Compared to the GR1 nose the shape is a fair bit different. The nose dry fitted to the forward fuselage, without modification. Fit is outstanding. I also filled the left side gun port as it was deleted on the F3. There will be a little bit more work on the panels required here, but a small length of styrene rod glued in with superglue and sanded to fit made short work of the gun port. The F3's were fitted with F/A-18 style stick grips before they went to the gulf, so I raided my Academy Hornet kit for one as they have 2 even in the single seat version. Compared to the Aires joystick Grafted on. Parts of the forward fuselage plug. These parts virtually snap together and are very strong. I am still quite pleased with how well it all fits. Once the two halves of the plug were glued together with superglue, the bulkhead was slid into place and also glued. The whole assembly is very rigid and will add considerable strength to the model. The built up part next to the fuselage ready for the razor saw to begin its work. I have started to mark out where the plug will sit, which by design is where the panel line is on the model. Mark M, Uncarina, Hubert Boillot and 13 others 16 Link to comment Share on other sites More sharing options...
DonH Posted July 26, 2017 Share Posted July 26, 2017 Oh boy, a big Tornado, this will be fun Link to comment Share on other sites More sharing options...
Mark M Posted July 26, 2017 Share Posted July 26, 2017 WOW!! Link to comment Share on other sites More sharing options...
Colin G Posted July 26, 2017 Share Posted July 26, 2017 WOW !! This is one conversion I have always wanted to do after seeing a few friends builds and will be following your build. I would love to know if I can get my hands on one and where from please. Link to comment Share on other sites More sharing options...
Simmo.b Posted July 26, 2017 Share Posted July 26, 2017 Great project mate, will follow with great interest!! Link to comment Share on other sites More sharing options...
wunwinglow Posted July 26, 2017 Share Posted July 26, 2017 I'd better get those illustrations to you Eric!!! Great to see you cracking on... Breaker 1 Link to comment Share on other sites More sharing options...
Kagemusha Posted July 26, 2017 Share Posted July 26, 2017 Mmmm... nice, does this mean the conversion will be available soon Tim? Link to comment Share on other sites More sharing options...
LSP_K2 Posted July 26, 2017 Share Posted July 26, 2017 WOW !! This is one conversion I have always wanted to do after seeing a few friends builds and will be following your build. I would love to know if I can get my hands on one and where from please. Link to comment Share on other sites More sharing options...
Whitey Posted July 26, 2017 Share Posted July 26, 2017 Cool mate. I've got the Heritage conversion set but haven't had the guts to start it. Looking forward to seeing how it goes. Link to comment Share on other sites More sharing options...
Gazzas Posted July 26, 2017 Share Posted July 26, 2017 Nice start. Nice difference in the nose. Link to comment Share on other sites More sharing options...
Jack Posted July 26, 2017 Share Posted July 26, 2017 Veeeeeery interesting, have fun building!!! Link to comment Share on other sites More sharing options...
TorbenD Posted July 26, 2017 Share Posted July 26, 2017 Super duper! Should be another great one to follow Eric. Torben Link to comment Share on other sites More sharing options...
RichieB Posted July 26, 2017 Share Posted July 26, 2017 Looking fwd to seeing the results already, excellent choice of subject! Link to comment Share on other sites More sharing options...
ClumsyDude Posted July 26, 2017 Share Posted July 26, 2017 Oh, this'll be good. That 3D printing really looks like the way of the future ... I found myself thinking, "but of course it must shrink," before I realised that it isn't resin and it probably fits perfectly! Rock on Eric. Jim Link to comment Share on other sites More sharing options...
wunwinglow Posted July 26, 2017 Share Posted July 26, 2017 Still a work in progress at the moment, still some unresolved design issues to hammer out, but Eric is doing a test assembly on the parts done so far. I'm looking forward to hearing how he gets on with it! Kagemusha, TaffyMan and Tony C 3 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now