Ali62 Posted September 4, 2021 Posted September 4, 2021 (edited) Spey Phantom intake and exhaust parts for 1/32 scale Tamiya conversion I have been fortunate to be involved to a small extent and now to a much larger extent on making these parts available to modellers that either have the Cutting Edge conversion or who are prepared to do a fair bit of kit bashing them selves, to produce a BRITISH PHANTOM from the Tamiya F-4J Phantom kit. This project has mainly been driven by the talented modeller Anthony Galbraith, who is doing a mammoth build on Large Scale Planes, see the link here https://forum.largescaleplanes.com/index.php?/topic/86105-raf-fg1-xv571-wild-hare-phantom-conversion/ The next important person in the chain is the CAD designer Kerry Carlyle, who got on board as a favour to help Anthony out with some of the tricky parts and that would be impossible to design with this amount of detail by good ‘old’ modelling methods. The other important person who brought Anthony, Kerry and myself together is Rick Godden, so that completed the team. However as you will see on the LSP thread above there have been quite a few others guys that have chipped in with information and pictures to assist. At this point it has been handed to myself to see the interest and the viability of producing these sets for modellers. However as this is NOT a full complete conversion, I really feel that before I spend a lot of time settting up the optimum printing orientation, and taking firm orders, it would be beneficial to see the demand for this set. Kerry has invested a lot of hours in developing and reworking the set in conjunction with Anthony, and it is to that end that Kerry would also like to see some return financially for all his hard work. He and I have now struck a deal that providing we have enough interest will firstly benefit him and secondly if the interest is sufficient I will look at adding even more parts to enable the conversion from J to K/M Phantom that little bit easier, not promising any defined time line, or what I may offer. As many of you will know I was planning this conversion a few years ago, then we got promised a full kit, and although that may still happen……one day this may still work out the best way to get some of the best detailed parts for the Spey. Without trying to make comments on each photograph here is quite a few from my initial TEST PRINTS, and a few more lifted from the LSP BUILD tht is linked above that show the fit on the kit. The first picture shows what is included in the set, there is a total of 16 parts, the set will retail for £30.00 plus shipping. As a guide the shipping will be as follows £4.50 for the U.K., £8.00 for Europe, and £12.00 for the rest of the world, this will be standard airmail, tracked will be extra. To make this a worthwhile project we require an order book of at least 20 sets. All of these parts will be 3D printed resin as shown in the pictures. The only way that I can sort and arrange a list of interested customers is through my email address at aerocraftmodels@gmail.com Once the poll is complete, end date for initial interest, will be till the 12th September 2021, if sufficient numbers have been attained the set will go live on my website aerocraftmodels.com and each interested party will be emailed. The first sets will be mailed out around the beginning of October. Edited October 23, 2021 by Ali62 Corrections scvrobeson, Elftone, Landrotten Highlander and 13 others 16
Landrotten Highlander Posted September 4, 2021 Posted September 4, 2021 (edited) If the set becomes available I may be interested in tackling such an extensive conversion mesel' Count me in, email on its way Edited October 14, 2021 by Landrotten Highlander
Tony T Posted September 4, 2021 Posted September 4, 2021 Looks lovely but I'd need new inlets and inserts for the Rolls-Royced rear flanks and belly, plus the different shaped shingles aft of the jetcans — i.e. more airframe — before hacking up an F-4J. Frankly, I think Hong Kong Models owes everyone a statement concerning the Spey Toom project. We need to know whether there's a serious prospect of an F-4K/M in the next few years, and using the Aerocraft set on that. Congrats on this all the same, and for the beautiful clear F-4 canopy set: my two arrived safely this week. Tony nmayhew 1
Anthony in NZ Posted September 4, 2021 Posted September 4, 2021 Oh great news Ali! Those test prints look brilliant! Might have to order a set of those myself Lol I can say without a shadow of a doubt they are going to make life a WHOLE lot easier to make a Brit Toom possible! Another thing that might be worth knowing is that is ever a kit comes out there is a strong possibility they might even fit it. We went off actual measurements, but there was some tweaking to get them to fit Tamiya. Although there is no financial gain for me, Kerry and I really did this out of pure love for the Spey Phantom and to help me out. The idea is that with Ali on board he can help realize anyone elses dreams. Good on you mate for making them available. Thanks for the nice compliment on my build and I hope you get lots of interest.... I really hope we see more Brit Phantom conversions out there being done or even considered. Who knows you might even beat me to finish! Cheers Anthony Derek B and Landrotten Highlander 1 1
Cees Broere Posted September 7, 2021 Posted September 7, 2021 That is definintely good news for the Spey Phantom fans. Too late for me now that my Tamiya/Revell kitbash is nearly finished. But I may be tempted to do another one. Anthony in NZ 1
Breaker Posted September 16, 2021 Posted September 16, 2021 PM sent for a couple of sets. I've been considering doing some CAD for a while on the Brit F-4s, I might be able to supplement this set with some smaller parts as well like the UK fin cap. Anthony in NZ 1
Ali62 Posted September 19, 2021 Author Posted September 19, 2021 We now have enough orders for the printing to start very soon, I shall be making through the list in the order that I received the orders. as each order is ready I shall email you and send a PayPal invoice. Derek B and Anthony in NZ 2
thierry laurent Posted September 22, 2021 Posted September 22, 2021 Hi Ali, You can put me on the list as well!
Cees Broere Posted February 23, 2022 Posted February 23, 2022 Hi Ali, I have started another conversion, this time a RN FG-1, using the Revell kit only. Is it still possible to get a set? Cheers Cees
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now