Model_Monkey 84 Posted February 11 (edited) Very happy to announce a 3D-printed model of the World War Two-era "Set, Complete Radio 522-A" ("SCR-522-A") used by the US Army Air Corps, Royal Air Force and Royal Australian Air Force. This model is available in 1/32 and 1/24 scales. Other scales are possible. Often referred to as a "Signal Corps Radio", the SCR-522-A was installed aboard many aircraft types. For example, the SCR-522-A was a conspicuous feature of the P-51D and P-51K Mustang fighters, installed behind the pilot's armored seat back and visible through the bubble canopy. In RAF and RAAF service, this radio set was known as the TR.5043. Later this month, we will be releasing a highly detailed, 3D-printed cockpit for the classic Revell 1/32 scale Bristol Beaufighter. Click here for the Model Monkey products in 1/24 scale and 1/18 scale Click here for Model Monkey products in 1/32 scale. Click here for the Model Monkey catalog. Edited Tuesday at 11:37 PM by Model_Monkey 8 R Palimaka, Anthony in NZ, BiggTim and 5 others reacted to this Share this post Link to post Share on other sites
LSP_Ray 5,314 Posted February 11 Sweet! 2 Out2gtcha and Model_Monkey reacted to this Share this post Link to post Share on other sites
Out2gtcha 26,460 Posted February 11 Indeed, very nice! 1 Model_Monkey reacted to this Share this post Link to post Share on other sites
BiggTim 5,328 Posted February 11 Wow, that Formlabs printer really has some crazy resolution!!! 1 Model_Monkey reacted to this Share this post Link to post Share on other sites
D Bellis 2,202 Posted Tuesday at 07:28 PM On 2/10/2019 at 8:33 PM, Model_Monkey said: Later this month, we will be releasing a highly detailed, 3D-printed cockpit for the classic Revell 1/32 scale Bristol Beaufighter. That's great news! D 3 Gerhard, Model_Monkey and Out2gtcha reacted to this Share this post Link to post Share on other sites
LSP_Kevin 24,720 Posted Tuesday at 07:52 PM On 2/11/2019 at 12:33 PM, Model_Monkey said: Later this month, we will be releasing a highly detailed, 3D-printed cockpit for the classic Revell 1/32 scale Bristol Beaufighter. 22 minutes ago, D Bellis said: That's great news! D Indeed it is! I might finally have a reason to build mine, now. Kev 3 Model_Monkey, Out2gtcha and D Bellis reacted to this Share this post Link to post Share on other sites
Out2gtcha 26,460 Posted Tuesday at 08:26 PM On 2/10/2019 at 7:33 PM, Model_Monkey said: Later this month, we will be releasing a highly detailed, 3D-printed cockpit for the classic Revell 1/32 scale Bristol Beaufighter. 58 minutes ago, D Bellis said: That's great news! 34 minutes ago, LSP_Kevin said: Indeed it is! I might finally have a reason to build mine, now. Wow! All I saw was the radio bit.................I missed the 3D printed Beau pit! That is INDEED excellent news! Like the guys above, that makes me super happy, and has been a LONG time coming. Ive got a Lodela torp Beau that is just begging for one of these! Any chance the set will come with a gunners station too? (not being greedy or ungrateful, just had to ask ) 1 Model_Monkey reacted to this Share this post Link to post Share on other sites
Model_Monkey 84 Posted Tuesday at 09:29 PM (edited) Here are some renderings of the Beaufighter cockpit design at about 75% complete. Much work yet to do and much of what you see here will change, but you can get an idea of the design's potential. Changes will include the sidewall panels which will be replaced with simple beams supporting the instruments and throttle quadrants. Radios will be further detailed. The floor and bulkheads will be thinned, too. Other features will be added including a yoke, rudder pedals, heater duct, etc. The instrument bezels are sized to match Airscale 1/32 RAF instrument decals. If there is sufficient demand, I can design upgrades for the observer/gunner's station and an instrument panel for the Beaufighter Mk.21. No gunner canopy, however, or aft gun. That will be up to the modeler or another vendor. Edited Tuesday at 10:12 PM by Model_Monkey 5 1 D.B. Andrus, MikeMaben, Out2gtcha and 3 others reacted to this Share this post Link to post Share on other sites
D.B. Andrus 2,535 Posted Tuesday at 09:50 PM Just beautiful! 2 Out2gtcha and Model_Monkey reacted to this Share this post Link to post Share on other sites
LSP_Ray 5,314 Posted Wednesday at 04:13 AM Oh, man that is so needed! 1 Model_Monkey reacted to this Share this post Link to post Share on other sites
Scotsman 1,088 Posted Saturday at 08:50 AM How did I miss this news, PLEASE do the observer cockpit as well, I've been planning a Dallachy based Beaufighter for SO long.. This year might turn into the Year of the Strike wing for me!!! 1 Model_Monkey reacted to this Share this post Link to post Share on other sites
Steve Eagle 71 Posted Saturday at 02:14 PM I just started on an old Lodela kit. Trying to get an interior going on this is daunting. Just have a floor and spars in place, but I will HAPPILY wait on one of your interiors. PLEASE do the observers area also. The Beau in this scale has been sadly underserved. Still debating between a night fighter or TF X. 2 Out2gtcha and Model_Monkey reacted to this Share this post Link to post Share on other sites
petrov27 1,735 Posted Saturday at 09:48 PM The radio looks great and the Beau-pit amazing! Yes I would also definitely be on-board for a observer's station as well - even it was just the basics (can't see a whole lot back there.) Im thinking wheel-wells would also be another thing to consider... 1 Model_Monkey reacted to this Share this post Link to post Share on other sites
Gerhard 2,536 Posted 17 hours ago Oh wow................. runs off to look if he can find a 1/32 Beau kit somewhere here in the jungle. 1 Model_Monkey reacted to this Share this post Link to post Share on other sites