Jim Barry Posted June 26, 2022 Share Posted June 26, 2022 Well done! Link to comment Share on other sites More sharing options...
Rockie Yarwood Posted June 26, 2022 Share Posted June 26, 2022 Excellent work Iain - you're getting to the home stretch! Link to comment Share on other sites More sharing options...
LSP_Kevin Posted June 26, 2022 Share Posted June 26, 2022 Great stuff, Iain! Kev Link to comment Share on other sites More sharing options...
Iain Posted January 14 Author Share Posted January 14 Was going to try and finish this over Christmas (it's been a looong time since I finished anything) - but we were all a bit poorly over the break - and no modelling was done. Catching up today and first colour is on: Xtreme Metal 'White Aluminium' over MRP Fine Grey Primer - and not looking too shabby I think. Tailplane and rudder loosely placed: The 'White Aluminium' works well for a silver doped finish IMHO. Front cowl ready for scribing and a polished alloy finish: I've been drawing up the wheels, legs and engine in Fusion 360 - test prints of some of the draft parts below - still some more work to do: Next up some minor tweaks and then masking ready for the fuselage red - have drawn up masks for the aircraft registration. Really want to get this one off the decks in the next few weeks. Model on dudes! Iain Out2gtcha, Shoggz, patricksparks and 15 others 18 Link to comment Share on other sites More sharing options...
Out2gtcha Posted January 15 Share Posted January 15 Great work Iain!! Derek B 1 Link to comment Share on other sites More sharing options...
Iain Posted February 13 Author Share Posted February 13 I've only gone and done some actual model making! Plucked up the courage to get some masks I'd drawn up, and cut on the digital cutter, onto the scratch built 1:32 Dart Kitten model at last - and get a coat of red on over the silver. Has come out OK I think. Need to do the wing registration letters next, masks for those are ready to go - maybe tomorrow evening... Have fun! Iain MikeC, Starfighter, Out2gtcha and 15 others 18 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted February 14 Share Posted February 14 That looks fantastic, Iain! Kev Iain and Derek B 1 1 Link to comment Share on other sites More sharing options...
Archimedes Posted February 14 Share Posted February 14 That is already looking fantastic Iain! Kind regards, Paul Iain 1 Link to comment Share on other sites More sharing options...
Jaro Posted February 14 Share Posted February 14 How I could miss this thread??!! What a fabulous piece of craftmanship. I've always admired the old school modelling skill. Your final effect looks outstanding! Iain 1 Link to comment Share on other sites More sharing options...
mozart Posted February 14 Share Posted February 14 Wonderful Iain, and what some great colours! She’s blossoming into a real bobby-dazzler! Derek B, Iain and Archimedes 2 1 Link to comment Share on other sites More sharing options...
Shoggz Posted February 14 Share Posted February 14 Very nice indeed! Derek B and Iain 1 1 Link to comment Share on other sites More sharing options...
Iain Posted February 14 Author Share Posted February 14 Thanks for the interest everyone - she's taken way too long... Iain Derek B 1 Link to comment Share on other sites More sharing options...
Troy Molitor Posted February 14 Share Posted February 14 Lovely efforts Iain. Love the color contrast. Iain 1 Link to comment Share on other sites More sharing options...
Iain Posted February 25 Author Share Posted February 25 Starting to really gel with Fusion 360 - faster progress and a lot less frustrating now! Aeronca E-113 engine and undercarriage parts for the Dart Kitten. To give an idea of size the cylinder mounting holes in the block are 3mm dia. Engine block: Cylinder - will be mirrored left/right: Wheel hub: Undercarriage leg - hollow along the two 'tubes' to take a 1mm brass rod core: Some more bits to design and then some test prints during the week, hopefully. May appear to be a small step - but after fighting the software for months I'm finally ahead of the curve - or most of it anyway. This will have a knock on for so many other projects that I've stalled progress on! Blue skies, Iain Shoggz, LSP_Kevin, Landrotten Highlander and 4 others 7 Link to comment Share on other sites More sharing options...
mozart Posted February 25 Share Posted February 25 So when you started this build 7 years ago Iain, could you….would you…..have dreamed of designing and printing this engine yourself? How things change….exciting times but all a bit too late for this (moi!) old fart. Iain 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now