Nachtjaeger Posted July 20, 2020 Share Posted July 20, 2020 So guys what paints are you using that sprays well with airbrushes and not much fuss is needed when prepping it for airbrush? I was brought up on Model Master Enamels and Floquil and I have always liked how they brush and spray. But now you got all kinds of acrylics and new players on the scene. What do you guys use with good results? Out2gtcha 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted July 20, 2020 Share Posted July 20, 2020 Ive become one of the many MRP disciples. But I'm hooked with good reason IMHO, MRP is technically and acrylic but because it comes pre-mixed in a lacquer medium, it sprays like a silky sweet dream, and is in general pretty bomb proof, not really getting effected by environmentals ( \water drops, masking tape ect, ect) like normal acrylics do. It also lets me use all the cool enamel washes out there that really work nicely. Everything has its drawbacks, and MRP is that it can be expensive, harder to find for some (SprueBrothers now handles the line, so I've got multiple sources now myself) and you really need a ventilation system, as like all lacquer paint it stinks badly. All milage may vary. AlbertD, Nachtjaeger and BarryWilliams 3 Link to comment Share on other sites More sharing options...
MikeC Posted July 20, 2020 Share Posted July 20, 2020 I've used Tamiya acrylics for years, and I've got used to them. I also use Mr Hobby Aqueous, as they're pretty much interchangeable with Tamiya. I've tried other paints in the past, but I took a decision a couple of years ago to limit my paint stock to just those. OK, I have to mix some colours, but it makes life easier on balance. chrish 1 Link to comment Share on other sites More sharing options...
dennismcc Posted July 20, 2020 Share Posted July 20, 2020 Apart from one flirt with Xtracrylix which I was not impressed with I stick to enamels, great range of paints, I find them easy to airbrush or brush paint and they do not need a primer. I tend to stick to Humbrol for detail brush painting though I do occasionally use them for for overall finishing when I don't have the correct colour in my other paints. I use Xtracolor, Sovereign Colourcoats and Model Master for overall paint finishes, as long as you stir them to death, thin them correctly they work great, though the drying time is longer than acrylics. Cheers Dennis Nachtjaeger 1 Link to comment Share on other sites More sharing options...
DonH Posted July 21, 2020 Share Posted July 21, 2020 I use Tamiya "acrylics" and Mr Hobby paints (not the aqueous range). This is mainly due to what's readily available in quantity over here. I thin everything with Mr Color Levelling Thinner, so I don't know if that means I am treating everything like Lacquer or Acrylics. I have tried some MRP paint but don't seem to get on with it. This is probably lack of practice. Link to comment Share on other sites More sharing options...
AlbertD Posted July 21, 2020 Share Posted July 21, 2020 I've had good luck with Tamiya and Mr. Color both thinned with Mr. Leveling Thinner. They both spray great. I've recently started using MRP and love it. That's pretty much all I buy now but have no problem using up my stock of Tamiya and Mr. Color. I've tried various acrylic paints and just can't get the nice finish I get with lacquer based paints. The acrylics tend to clog the airbrush easier too and needs much more cleaning and maintenance. Link to comment Share on other sites More sharing options...
nmayhew Posted July 21, 2020 Share Posted July 21, 2020 MRP hands down best spraying paint out there durable; sprays straight from the bottle; wide range of colours; dries in seconds Out2gtcha and mozart 2 Link to comment Share on other sites More sharing options...
BarryWilliams Posted July 21, 2020 Share Posted July 21, 2020 On 7/20/2020 at 1:35 AM, Nachtjaeger said: So guys what paints are you using that sprays well with airbrushes and not much fuss is needed when prepping it for airbrush? With that sentence you are describing MRP lacquers. By far the most forgiving trouble and fuss free paint there is. No need to thin, just load and spray, no 'ifs' no 'buts'. For hand painting detail I use water based acrylics and for washes enamel. It all works together complementing each other. Out2gtcha, nmayhew and Nachtjaeger 3 Link to comment Share on other sites More sharing options...
Gazzas Posted July 22, 2020 Share Posted July 22, 2020 I prefer to use either Tamiya Acrylics or MRP lacquers. Tamiya is just too good not to use. MRP is easy to use and pretty fault free. MRP even mixes nicely with other MRP paints. Link to comment Share on other sites More sharing options...
Ryan Posted July 22, 2020 Share Posted July 22, 2020 Finally figured out Vajello model air and have been using those. Link to comment Share on other sites More sharing options...
mozart Posted July 22, 2020 Share Posted July 22, 2020 Another resounding vote for MRP, absolutely trouble free and sprays like a dream, and I don't mind the smell one little bit......just open a window. Link to comment Share on other sites More sharing options...
Subodai Posted July 22, 2020 Share Posted July 22, 2020 And another vote for MRP from me, lush out of the airbrush, mixes well, doesn't need thinning (but can be, if you want to, I've been using Tamiya lacquer thinners), cleans up nice as well. Their matt clear is also absolutely superb . Not had much trouble with Tamiya's Acrylic or Lacquers through the airbrush when properly thinned either, I can't get on with Vallejo out of an airbrush once you're spoilt by a good lacquer there's just no contest for me, they are handy for brush painting though. Out2gtcha 1 Link to comment Share on other sites More sharing options...
Thunnus Posted July 22, 2020 Share Posted July 22, 2020 I've been using Tamiya acrylics and Mr Hobby Aqueous paints mostly. Have tried the AK Real Colors line of paints and I've really liked those too. All three have similar properties and between the three product lines, I can usually find the shade I need without custom mixing. Have not tried MRP but it sounds like I should. Out2gtcha 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted July 22, 2020 Share Posted July 22, 2020 29 minutes ago, Thunnus said: I've been using Tamiya acrylics and Mr Hobby Aqueous paints mostly. Have tried the AK Real Colors line of paints and I've really liked those too. All three have similar properties and between the three product lines, I can usually find the shade I need without custom mixing. Have not tried MRP but it sounds like I should. I'm an absolute bumbler when it comes to paint John, and MRP makes me look like a painting genius! I cant get Tamiya acrylics to work for me to save my soul, except when I do a bunch of finagling with the mix including retarder. With your painting skills, MRP could make things even easier for you! Thunnus 1 Link to comment Share on other sites More sharing options...
Thunnus Posted July 22, 2020 Share Posted July 22, 2020 3 minutes ago, Out2gtcha said: I'm an absolute bumbler when it comes to paint John, and MRP makes me look like a painting genius! I cant get Tamiya acrylics to work for me to save my soul, except when I do a bunch of finagling with the mix including retarder. With your painting skills, MRP could make things even easier for you! What do you use to thin MRP? I know MRP is airbrush-ready but I need the flexibility to vary the viscosity of my paints depending on what I am trying to do. Out2gtcha 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now