Dukie99 Posted June 5, 2021 Share Posted June 5, 2021 I will join this GB with Trumpeter Mig-29 SMT. I will try for a simple build with limited amount of AM: Quinta studio cockpit details, Aires burner cans and Reskit wheels. I did not find any aftermarket decals for this kit but I have enough spare bort numbers and russian stars from Linden Hill decals that I should not have to rely on the kit's decals. I may also use the begemot Mig-29 stencils but we'll see because I am not sure whether they are appropriate for a SMT. Box shot: The top part is an impressive piece of molding, the airvents are separate parts but the fit is very good: Quinta studio set Resin AM has been given a bath of diluted bleach and resin plugs have been cut, need to prep the parts for primer. The Aires can are not meant for the SMT, so I am not sure how they fit the kit but I will give it a try. I wish there would be more resin ordnances for modern russian jets. Reskit has started come up with a nice range but mostly smaller dumb bombs and rocket pods. I will probably go with some of the kit's ordnance. Cheers, David blackbetty, Kagemusha, Greg W and 11 others 14 Link to comment Share on other sites More sharing options...
Kagemusha Posted June 5, 2021 Share Posted June 5, 2021 Great project, I have two sets of the Begemot Mig 29 sheet, so if you require any Bort numbers from those, just ask. Martinnfb 1 Link to comment Share on other sites More sharing options...
Dukie99 Posted June 5, 2021 Author Share Posted June 5, 2021 11 minutes ago, Kagemusha said: Great project, I have two sets of the Begemot Mig 29 sheet, so if you require any Bort numbers from those, just ask. Thank you this is very kind of you, but I think I should be good on that front. Cheers, David Martinnfb 1 Link to comment Share on other sites More sharing options...
1to1scale Posted June 5, 2021 Share Posted June 5, 2021 i will be watching this one! Martinnfb 1 Link to comment Share on other sites More sharing options...
Dukie99 Posted June 5, 2021 Author Share Posted June 5, 2021 I made some good progress today, working on the cockpit. I had used Quinta set for a Su-57 Felon build in 1/48 and had been impressed by the quality of the product, but the Mig-29SMT set in 1/32 is even better. The fit is perfect, the resin is flexible enough to conform well to the plastic. I used Mig Ultra glue and it works really well. See for yourself: Looking at it straight on the panel is flat, at an angle the screens and dials have a glassy look which is great and now the rest of the pit and seat I highly recommend this set and looking at reference pictures in the Yefim Gordon book, it is also a very accurate representation of the real thing. More progress soon. Cheers, David Supersonic, LSP_Kevin, themongoose and 20 others 23 Link to comment Share on other sites More sharing options...
Martinnfb Posted June 5, 2021 Share Posted June 5, 2021 Fantastic start, I will follow with interest . Link to comment Share on other sites More sharing options...
Neo Posted June 6, 2021 Share Posted June 6, 2021 Wow love the Quinta stuff looks amazing Martinnfb 1 Link to comment Share on other sites More sharing options...
Mr Matt Foley Posted June 13, 2021 Share Posted June 13, 2021 Signed up for this build. I built the 1/48 GWH SMT so lets see how this goes. Martinnfb 1 Link to comment Share on other sites More sharing options...
Mr Matt Foley Posted October 17, 2021 Share Posted October 17, 2021 Hey guys, did Trumpeter make corrections to the SMT vs. the 9-12? I ask because there was some observations of trouble with the initial release of the 9-12 (Fulcrum A). Link to comment Share on other sites More sharing options...
Dave Williams Posted October 17, 2021 Share Posted October 17, 2021 14 minutes ago, Mr Matt Foley said: Hey guys, did Trumpeter make corrections to the SMT vs. the 9-12? I ask because there was some observations of trouble with the initial release of the 9-12 (Fulcrum A). What corrections are you looking for? If you’re talking the engine humps on the upper fuselages, then no. Martinnfb 1 Link to comment Share on other sites More sharing options...
Dukie99 Posted October 23, 2021 Author Share Posted October 23, 2021 I am back at this one with the hope of finishing before the end of November. All my modelling mojo has been sucked up by SH-60 that I started for the Navy GB. The kit itself is great with tons of details, but the instructions are so confusing or non-existant (even after downloading the correction) that it kills the fun. Anyway back to the Mig. Today I put the last touch to the cockpit. The PE which Trumpeter provides for the HUD and the glare shield is very good and complement nicely the Quinta set which is great. I cannot judge for the accuracy of the kit but it looks like a SMT and build well, you still need a bit of filler here and there but otherwise I think it is a solid effort for Trumpeter. I got myself some Aires cans, which were designed for the Mig-29K or M. They fit but leave a nasty gap on the bottom where the cans join the fuselage. I bought some Reskit cans instead and they seem to fit better, but I need to finish them first before posting pictures. Here are pics of the finished cockpit More progress soon. Cheers, David Tony T, panzerrob, LSP_Kevin and 13 others 16 Link to comment Share on other sites More sharing options...
themongoose Posted October 24, 2021 Share Posted October 24, 2021 Paint and the quinta detail in the cockpit look sharp. Some nice subtle wear in there as well. Martinnfb, Troy Molitor and Dukie99 2 1 Link to comment Share on other sites More sharing options...
Troy Molitor Posted November 1, 2021 Share Posted November 1, 2021 I hate missing great build like this. Not a jet guy but this is so nice! thanks for sharing. Martinnfb 1 Link to comment Share on other sites More sharing options...
Dukie99 Posted November 10, 2021 Author Share Posted November 10, 2021 OK something to show tonight. I finished the main camo painting. I used the grey-green colors made for the SMT by Mr. Paint and I like the way they came out. I still have some touch-up and a number of panels which needs to be masked and painted but the main effort has been done. I hope you like it. Cheers, David themongoose, kap64, alain11 and 13 others 16 Link to comment Share on other sites More sharing options...
themongoose Posted November 11, 2021 Share Posted November 11, 2021 That looks super sharp! Love the crisp edges on the camo Dukie99 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now