LSP_Ray Posted September 24, 2018 Share Posted September 24, 2018 1 hour ago, MikeMaben said: Daaam , missed it again ! They had more than one of each of them! MikeMaben 1 Link to comment Share on other sites More sharing options...
LSP_K2 Posted September 24, 2018 Author Share Posted September 24, 2018 My "accidental" purchase arrived today. I'm not entirely unhappy that I purchased it, but it certainly could have waited until later. Out2gtcha, mpk and Southern Bandit 3 Link to comment Share on other sites More sharing options...
LSP_K2 Posted September 25, 2018 Author Share Posted September 25, 2018 Several years ago, I bought this same set of pin drills, but over the ensuing years, lost many of them and broke a few more. A couple of weeks ago, I set out on a mission to find these at the best price I could, and did eventually find them, at Home Depot of all places, and at a very good price too (far better than any of the online hobby stores, I can tell you). These will come in very handy on a big G-14 that I’m currently working on. I’m a happy, happy guy. mpk, Jan_G and Out2gtcha 3 Link to comment Share on other sites More sharing options...
Neo Posted September 25, 2018 Share Posted September 25, 2018 12 hours ago, LSP_Typhoonattack said: Several years ago, I bought this same set of pin drills, but over the ensuing years, lost many of them and broke a few more. A couple of weeks ago, I set out on a mission to find these at the best price I could, and did eventually find them, at Home Depot of all places, and at a very good price too (far better than any of the online hobby stores, I can tell you). These will come in very handy on a big G-14 that I’m currently working on. I’m a happy, happy guy. Do you have the item number? Link to comment Share on other sites More sharing options...
LSP_K2 Posted September 25, 2018 Author Share Posted September 25, 2018 2 hours ago, Neo said: Do you have the item number? No, but I do have a link. Many of the online hobby shops, tend to sell this set for $25 (or more). Neo 1 Link to comment Share on other sites More sharing options...
Bill_S Posted September 25, 2018 Share Posted September 25, 2018 Kevin, will that pin vise close enough to hold the #80 drill? Link to comment Share on other sites More sharing options...
LSP_K2 Posted September 25, 2018 Author Share Posted September 25, 2018 57 minutes ago, Bill_S said: Kevin, will that pin vise close enough to hold the #80 drill? Yes, it's 0-.040 diameter. Here's the link to the Amazon page Link to comment Share on other sites More sharing options...
Bill_S Posted September 26, 2018 Share Posted September 26, 2018 Thanks, Kevin. Starrett makes great stuff; I have quite a few of their tools from my machinist days. Getting that pin vise down to "zero" is not as easy as it sounds. LSP_K2 1 Link to comment Share on other sites More sharing options...
LSP_K2 Posted September 26, 2018 Author Share Posted September 26, 2018 4 hours ago, Bill_S said: Thanks, Kevin. Starrett makes great stuff; I have quite a few of their tools from my machinist days. Getting that pin vise down to "zero" is not as easy as it sounds. The overall quality of the Starrett stuff that I've seen, is usually quite high. Several of the "hobby" pin vices that I have, will not close to zero at all, and also are frequently cut with the center of the chuck "off-axis", making for a wobbly holder, not so bad for larger bits, but terrible for the smaller diameter ones. Bill_S 1 Link to comment Share on other sites More sharing options...
Jan_G Posted September 28, 2018 Share Posted September 28, 2018 (edited) I had read Masters of the Air and Hell's Angels recently and needed some reference pics for B-17 so accuired few books, with nice decals included and bought this small baby jan Edited September 28, 2018 by Jan_G Phartycr0c, Out2gtcha, Trak-Tor and 3 others 6 Link to comment Share on other sites More sharing options...
Out2gtcha Posted September 28, 2018 Share Posted September 28, 2018 3 hours ago, Jan_G said: I had read Masters of the Air and Hell's Angels recently and needed some reference pics for B-17 so accuired few books, with nice decals included and bought this small baby jan Got a cool dio idea.......... BloorwestSiR, LSP_K2 and Jan_G 3 Link to comment Share on other sites More sharing options...
BloorwestSiR Posted September 28, 2018 Share Posted September 28, 2018 Something for my ZM Horton: Found these for a decent price so couldn't resist. scvrobeson, Bill_S, Rick Griewski and 6 others 9 Link to comment Share on other sites More sharing options...
Michael931080 Posted September 28, 2018 Share Posted September 28, 2018 Carl, the Dog is giving you the look of "guilt" on your purchases! BloorwestSiR 1 Link to comment Share on other sites More sharing options...
Tnarg Posted September 28, 2018 Share Posted September 28, 2018 Regarding small diameter drill bits, I have ordered from "Drill Bit City" which resharpens small drill bits which contain a larger diameter base so that a drill press or pin vise fits them much better. Their store on Amazon sells a set of 25 bits (resharpened) from #80 to #56 for about $25. They have 3.175 mm shanks. The larger shank works very well. Tnarg LSP_K2 1 Link to comment Share on other sites More sharing options...
LSP_K2 Posted September 29, 2018 Author Share Posted September 29, 2018 On 9/28/2018 at 1:14 PM, Jan_G said: I had read Masters of the Air and Hell's Angels recently and needed some reference pics for B-17 so accuired few books, with nice decals included jan I just snatched the Kagero B-25 book (Pacific) myself recently. I actually need to get it scanned and entered into the database. On 9/28/2018 at 6:34 PM, Tnarg said: Regarding small diameter drill bits, I have ordered from "Drill Bit City" which resharpens small drill bits which contain a larger diameter base so that a drill press or pin vise fits them much better. Their store on Amazon sells a set of 25 bits (resharpened) from #80 to #56 for about $25. They have 3.175 mm shanks. The larger shank works very well. Tnarg Oh I'll be certainly buying more bits eventually, so I'll be sure to check these out. Jan_G 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now