Christoffer Lindelav Posted March 6, 2022 Share Posted March 6, 2022 Your Viggen is looking great and I love your mess on the bench Link to comment Share on other sites More sharing options...
Aigore Posted March 6, 2022 Author Share Posted March 6, 2022 41 minutes ago, Christoffer Lindelav said: Your Viggen is looking great and I love your mess on the bench Hahahaha Thanks Christoffer I have no clue how I always manage to create such a mess Christoffer Lindelav 1 Link to comment Share on other sites More sharing options...
Aigore Posted March 11, 2022 Author Share Posted March 11, 2022 Time for the Friday update! More small stuff... Well models doesn't build themself you know, so on to the building! Today's first action was to drill a small hole on the port side close to the nosegear. And it's for this little thing that pretty much every model are built without. It is what it looks like, a small pitottube wich function escapes me at the moment but I bet I will be told soon Next it's time to detail the inside of the canopy. Did a little painting and drybrushing first. Then a little green wire was added...its other end will be attached at the ejection seat. Then I made this little thingy that goes into the top rear of the frame....I have no clue what it is. The cable will be gray and the contact black. And this thingy, I will cut it to shape but it's a box that fits inside the rear frame with a thick white cable running from it. The pieces painted and glued into place. Then I handpainted the ladder....no worries it'll be worn Then it was time for the Eduard goodies.... I'll use the Sparrow as a Skyflash, as they are pretty much indistinguishable from each other. The Sidewinders are as is... First I added the fins. Then I had to clean the Jetmads launchers. First with THE DREMEL, MUAHAHAHAHAHAHAHAHA... And then the scraper to get rid of the printlines! Done I ended today's session with impailing the launchers and missiles.... ready for primer CHeers! LSP_Kevin, Landrotten Highlander, Derek B and 9 others 12 Link to comment Share on other sites More sharing options...
Aigore Posted March 11, 2022 Author Share Posted March 11, 2022 Aha...Now I know what that little pitot tube is for, it is for determining when groundspeed is high enough to allow steering by rudder instead of the nose wheel. It automaticly change between wheel steering and rudder steering mattcour, Zola25 and Anthony in NZ 2 1 Link to comment Share on other sites More sharing options...
Aigore Posted March 13, 2022 Author Share Posted March 13, 2022 Wow, Sunday AGAIN?! Time flies... Weponisation Today I continued with the weapons... First I primed all in alclad flat black primer/microfiller. THen I used white primer on top of that for everything that will be painted gloss white. Then on with the gloss white....hmm doesn't show that well but they are painted On to the Sidewinders, I put down gloss black on the forward section. And painted it in Alclad steel. Next I masked the border between the metal and the rest of the missile body. I painted the body in FS36375 light ghost gray Then I brush painted the band and tip in aluminium. I used my chrome pensil and decanted some paint and brush painted the small bands and the very tip of the 'winder I finished the painting on the 'winders with Citadel Ironhand steel on the rollerons. Back to the skyflashes, I masked off the tip. THen painted the tips in FS36622, a very light gray, almost off white. I finished the session with gloss varnish over all.... next the decals! Cheers! Landrotten Highlander, geedubelyer, johncrow and 6 others 9 Link to comment Share on other sites More sharing options...
Aigore Posted March 13, 2022 Author Share Posted March 13, 2022 A Bonus!!! The Loadout All about the ordnance today. I begin with all the pesky decals.....tho the Eduard decals are really nice for decals. Oh, but first the seeker heads for the 'winders before I forget them again. Looks really nice in place. Yeah, the decals.....they are finally on, there was like a gazillion of them but I sort of forgot the smallest..... And next the Skyflash...I may have put a "AIM-7 Sparrow" mariking on them but I dare the model judge to spot it After the decals were on I sealed them with another coat of gloss varnish and then I set out to dirty them up a bit. After the wash had dried I wiped it off....don't want them too dirty I just want the details to pop a bit. Unfortunately I didn't get launchers with the Eduard missiles so I have to use the Jetmads launchers...and they don't match the Eduard missiles. I had to do a bit of "crafting" with the Dremel both on the launchers and on the missiles. To make the missiles grip the launchers I drilled holes in the missiles and launchers and glued piano wire in them With that the 'winders are done... I did the same thing on the Skyflashes... So here is the Viggen cold war fighter loadout.. 4x AIM-9M Sidewinder (Rb74) and 2x Skyflash (Rb71), a drop tank and that wicked 30mm KCA gun Cheers! Christoffer Lindelav, Fanes, LSP_Kevin and 13 others 16 Link to comment Share on other sites More sharing options...
Phartycr0c Posted March 14, 2022 Share Posted March 14, 2022 The loadout detail work is superb. This is a real head turner. Derek B 1 Link to comment Share on other sites More sharing options...
Aigore Posted March 15, 2022 Author Share Posted March 15, 2022 13 hours ago, Phartycr0c said: The loadout detail work is superb. This is a real head turner. Thanks Phartycr0c The Eduard missiles are gems! 9 hours ago, MARU5137 said: Jan, Exceptional work on the weaponry. Smart job done on it. Thanks Maru 1/32nd scale is way more forgiving on the eyes than 1/48th scale yeah I'm getting old Link to comment Share on other sites More sharing options...
Aigore Posted March 18, 2022 Author Share Posted March 18, 2022 It's Friday and you know what time it is! UPDATEY TIME! The teeth are sharp on this one... Well then...not much to say really. Not a big update but it took a while of trimming and positioning before I was happy. I even had to remove a wheelbay door to make room for the Skyflash. Well that's an importan obseration btw. The supports for the main wheelbay doors may be a bit long so you need to take a off a bit to get the doors in the right position, so be aware of this part! well anyways I got the weapons loaded and the Giagant Viggen just got meaner! I started with the Skyflashes because it was the most work to get into place. Next the drop tank....some smal fit issues because I hade puttied over the holes for the fastening luggs. I got that Dremeled real fast. The 'winders were the easiest to fit, just be avare that the luggs my need a bit of shortening as to fit in the holes in the pylons. First the belly 'winders. Then the wing 'winders. There you have it.....armed to bear! I got really tired in my left arm from holding that big resin lump, almost dropped it once Cheers! Christoffer Lindelav, crobinsonh, Dennis7423 and 11 others 14 Link to comment Share on other sites More sharing options...
Aigore Posted March 20, 2022 Author Share Posted March 20, 2022 And here is the Sunday update! This is it. With this update I can do no more until I have the turned brass pitot tubes. When that happens I don't know and have no control over, all I can tell you is that Maestro have them in the works and that they will be available before the summer. until then you hav e to make do with this update and perhaps I´ll do the boarding ladder some day but for now this is it! Looking good with the weapons on... Now for the canopy attachement...it wen't on without a hitch NOw I just have to arrange them cables and cords from the canopy. The two goes behind the seat, in fact the green should be connected to the seat but I think this is good enough. I drilled a 0.6mm hole for the alfa probe and glued it in place. Then this poor little antenna on the spine...I hope it stays Hmm...I lost the picture of the temp probe but it's in place under the right canard. what else is there.... I have a nagging feeling I've forgotten something. Here's some pics while I ponder. Ahhhh...the saftey handle for the bang seat!!! There you have it my friends, thank you for patiently following this build for 6 months or so! A few more things has been forgotten or will be changes as new facts has been recieved but I will not make an update of those. You will see in the Finish Pictures later this spring. See you in the next project! Cheers! Anthony in NZ, mattcour, GreyGhost and 15 others 18 Link to comment Share on other sites More sharing options...
geedubelyer Posted March 20, 2022 Share Posted March 20, 2022 Great job Aigore. Your Viggen turned out beautifully. It's been a pleasure following along. Thanks for sharing the ride. Cheers. Aigore 1 Link to comment Share on other sites More sharing options...
Aigore Posted March 20, 2022 Author Share Posted March 20, 2022 3 minutes ago, geedubelyer said: Great job Aigore. Your Viggen turned out beautifully. It's been a pleasure following along. Thanks for sharing the ride. Cheers. Thank you for following along for the ride I hope the finsish-pics will be good and I hope I can have them for you all before the summer. geedubelyer 1 Link to comment Share on other sites More sharing options...
Aigore Posted March 20, 2022 Author Share Posted March 20, 2022 10 minutes ago, MARU5137 said: Jan, What a STUNNINGLY GORGEOUS looking Viggen you have built ,with so many detailed parts, that it has been tremendously sweet and enthralling to follow your build/construction et al. She looks quite majestic and mean with it. Thank you. KUDOS.... Thank you Maru I hope all will be seated again for the next project....you'll see on friday when I post my first update a clue is Slava Ukraini Landrotten Highlander 1 Link to comment Share on other sites More sharing options...
Zola25 Posted March 20, 2022 Share Posted March 20, 2022 Congratulations on finishing it - what a journey It looks amazing. I really like the faded paintjob. Really cool! /Niels Link to comment Share on other sites More sharing options...
mattcour Posted March 20, 2022 Share Posted March 20, 2022 This has been a joy to follow along, Aigore. Great build and I'm looking forward to seeing the RFI pictures until summer... which means you have plenty of time to correct the position of the seat safety handle "STOLEN SAKRAD" should face the inwards I think, while the triangular end of the handle must face outwards off the seat. Violator1991 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now