chrish Posted January 3, 2020 Share Posted January 3, 2020 This kit was talking to me throughout the CF 18 build, calling louder to me through the EA 18 G build, yelling at me through the 109 G10 build! I couldn't take it anymore I had to get a start on it. If I progress to the end (it'll be OOB) it'll be in the splinter scheme included in the instructions and markings. Lothar, Landrotten Highlander, 109 and 9 others 12 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted January 3, 2020 Share Posted January 3, 2020 Cool project, Chris! You don't see too many of these built, which is a shame. I'm hoping this is one of the PCM kits that Kitlinx will re-release. Kev Link to comment Share on other sites More sharing options...
BradG Posted January 4, 2020 Share Posted January 4, 2020 I had some issues with the wings and the wheel well inserts so take your time there. Otherwise it was not a bad model. That said mine sat on the shelf of doom for about 3 years until I finished it. Link to comment Share on other sites More sharing options...
Ajak Posted January 4, 2020 Share Posted January 4, 2020 Man, where did you get that rarity from? I was able to get PCM MC 205 , what a joy! Still waiting for her turn on the workbench :-) Link to comment Share on other sites More sharing options...
Lothar Posted January 4, 2020 Share Posted January 4, 2020 That's gonna be an interesting build I'll follow, the G.55 is one of my favourite Italian WW2 aircraft. Good luck!! Lothar Link to comment Share on other sites More sharing options...
monthebiff Posted January 4, 2020 Share Posted January 4, 2020 Very cool project Chris, really like OCM kits, a bit of a challenge but well worth the effort. Regards Andy Link to comment Share on other sites More sharing options...
themongoose Posted January 4, 2020 Share Posted January 4, 2020 My 1st PCM kit is on it’s way. Very interested in seeing how this goes together, in conjunction with it being a unique subject I’ll be following! Link to comment Share on other sites More sharing options...
dennismcc Posted January 4, 2020 Share Posted January 4, 2020 A really nice looking subject, I built the PCM kit a long time ago and found it challenging, a bit like Special Hobby kits but if you want a G55 it's the only game in town and with perseverance it turns out well. Here is a link to my build over on Britmodeller, I was horrified when I looked at it as I had missed this thread when I replaced all the Photobucket images on my build threads on here and over there, they have now been replaced with Imageshack ones. https://www.britmodeller.com/forums/index.php?/topic/48434-pcm-fiat-g55-centauro/ Cheers Dennis Link to comment Share on other sites More sharing options...
chrish Posted January 4, 2020 Author Share Posted January 4, 2020 Hi guys, and thanks for the input and warning signs of what’s ahead! I bought this kit off the shelf at little hobby shop called Group two hobbies. Owned by a very friendly fellow named Duane. I haven’t been in a converted house hobby shop stocked from floor to ceiling like his in years! Almost every kit in there is by a non “main stream” manufacturer. I’ve got a start on the G55 as of now, I’m not sure if I’m test fitting the right parts in the right places but other than the exhaust outlets to engine section-engine section to cockpit, I haven’t come across any really badly fitting parts.....so far. monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted January 4, 2020 Share Posted January 4, 2020 From experience Chris ita normally the wing figment that's an issue on these kits, normally best to fit the upper wings to the fuselage and set the dihederal followed by adding the lower wing when dry. Sounds like a pain but works very well. Regards. Andy chrish 1 Link to comment Share on other sites More sharing options...
chrish Posted January 4, 2020 Author Share Posted January 4, 2020 Thanks Andy! That was exactly what I was planning on doing, nice to know I was on the right road!! Link to comment Share on other sites More sharing options...
MikeMaben Posted January 5, 2020 Share Posted January 5, 2020 I got wunna these too so I'll be tooning in Link to comment Share on other sites More sharing options...
coogrfan Posted January 5, 2020 Share Posted January 5, 2020 I have this kit in my stash, looking forward to this. Link to comment Share on other sites More sharing options...
chrish Posted January 5, 2020 Author Share Posted January 5, 2020 Hi again, thanks for the encouragement and looking. While standing on the shoulders of those who've come before me I have progressed fairly quickly (so far...never say whoa in a mud hole though!) Although to be honest the kit hasn't offered much so far in the way of surprises. I found a fit issue with the cockpit sidewalls (the right side to be precise) and closer examination showed the firewall locator is out of alignment, so I cut a groove in it to allow the side wall to locate (pictures speak better than I do) The left side ledge the right side, I carved a ledge in. The plastic in the cockpit area was also thinned, fist by scraping with a chisel then sanding fairly smooth, the picture shows the left side (thinned) and the right side for comparison The rest of the images just show the stopping point I'm at as of tonight. Tamiya putty is the "white" in the offending seams. Thanks for looking Out2gtcha, Alain Gadbois, MikeMaben and 7 others 10 Link to comment Share on other sites More sharing options...
monthebiff Posted January 5, 2020 Share Posted January 5, 2020 Looking good Chris. Regards. Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now