jgrease Posted December 19, 2019 Share Posted December 19, 2019 I'm hoping we can us this thread for corrections and information, much like the F-5 page became. I for one am fairly impressed with this kit - the molding is superior to the Italeri Mirage III and it looks like KH has learned from past issues. The one constant is lack of QC on Kitty Hawk's part - my kit had a short shot on the lower rear fuselage on the right fuselage half. Aside from that, the resin pilot looks incredible and the kit was packaged well. I'm starting mine tonight. LSP_K2, Stokey Pete and Out2gtcha 3 Link to comment Share on other sites More sharing options...
Stokey Pete Posted December 19, 2019 Author Share Posted December 19, 2019 I, for one, shall drop links to any reference material I find when I get round to starting the kit. Link to comment Share on other sites More sharing options...
Dave Williams Posted December 19, 2019 Share Posted December 19, 2019 A good walk around here. https://www.e-redstar.net/gallery/M2000.html Also at Prime Portal. http://www.primeportal.net/hangar/luc_colin3/mirage_2000c_french_af/ Daniel Leduc 1 Link to comment Share on other sites More sharing options...
Tony T Posted December 19, 2019 Share Posted December 19, 2019 3 hours ago, Dave Williams said: I tend to agree that it might not be much of an issue. The shock cones are pretty large, and the kit has an inner wall part for the intakes that curves inward and reduces in diameter. With the combination, I think the view down the intake is pretty restricted. I’m not sure full ducting is worth the effort. My thought is to just paint the fuselage interior, including the engine a dark color and you won’t see anything... The intakes are an ivory colour. However, if the inner wall is extended with thin plastic card that should work. I don't think the engine front is visible through the inlet, but the off-white trunking curving inwards is. Still looks to be a very tasty kit. Looking fwd to buying one in the new year. Tony Daniel Leduc 1 Link to comment Share on other sites More sharing options...
eoyguy Posted December 19, 2019 Share Posted December 19, 2019 (edited) Should be easy enough to make some intakes using thin rolled plastic sheet. Considering I was able to make very convincing intakes in a Revell 1/32 F-15 using this method, the Mirage should be easy peazy Edited December 19, 2019 by eoyguy Link to comment Share on other sites More sharing options...
Stokey Pete Posted December 19, 2019 Author Share Posted December 19, 2019 An unexpected bonus has arisen from the kit. I can now replace the 2 horrendously mis-shaped Trumpeter Storm Shadow missiles I was gonna hang off the belly of my Tornado. They're much closer matches for the Flightpath versions. LSP_K2 1 Link to comment Share on other sites More sharing options...
Marcel111 Posted December 20, 2019 Share Posted December 20, 2019 Dave, thx for sharing those first impressions. On the IP, since they market the kit as a C I guess I'll give them a pass on that one. Seems like the designer really got confused with the variants though. Which I have a hard time understanding since it's not exactly an intellectual stretch to compile a variant comparison list based on the info that's readily available on the web. Forgetting the throttle is not exactly a confidence builder either, although it's easy to correct. Really don't get the lack of intake trunking, this must be one of the few industries where designers can afford to be completely out of touch with the user. All that said I'm pleased to have a Mirage 2000 available and really pleased that the surface detail and shape accuracy seem to be good. I'm waiting to get the kits in my hands but if the latter is true I'll also buy the D. Cheers, Marcel Out2gtcha and crobinsonh 2 Link to comment Share on other sites More sharing options...
Kagemusha Posted December 20, 2019 Share Posted December 20, 2019 I have a feeling one of the French am producers like Renaissance Models will produce a -5 IP, and other required stuff, patiently waiting for the two-seater... dutik 1 Link to comment Share on other sites More sharing options...
thierry laurent Posted December 20, 2019 Share Posted December 20, 2019 Well, the 2000 is not really well documented whereas along the years multiple small variants appeared. The same can alas be said for most French postwar fighters. There are not a lot of publications about that plane. Fortunately we have three new recent and modelling-oriented publications but nothing really useful and easily available from France except the very hard to find and already old DTU book. So, I'm not surprised this was unfortunately not that easy for Kittyhawk. Link to comment Share on other sites More sharing options...
jgrease Posted December 20, 2019 Share Posted December 20, 2019 (edited) Someone on FB posted a very useful photo of the differences between the fin tips for the rudder, but photobucket will turn it into a fuzzy blob. Anyone have a way to bring it here? Edited December 20, 2019 by jgrease Link to comment Share on other sites More sharing options...
Kagemusha Posted December 20, 2019 Share Posted December 20, 2019 10 minutes ago, jgrease said: Someone on FB posted a very useful photo of the differences between the fin tips for the rudder, but photobucket will turn it into a fuzzy blob. Anyone have a way to bring it here? See page one of this thread. Link to comment Share on other sites More sharing options...
Dave Williams Posted December 20, 2019 Share Posted December 20, 2019 13 minutes ago, thierry laurent said: Well, the 2000 is not really well documented whereas along the years multiple small variants appeared. The same can alas be said for most French postwar fighters. There are not a lot of publications about that plane. Fortunately we have three new recent and modelling-oriented publications but nothing really useful and easily available from France except the very hard to find and already old DTU book. So, I'm not surprised this was unfortunately not that easy for Kittyhawk. Considering that they included 4 fin options, 2 wingtip antenna options, 2 tail stinger options, 2 aft wing root fairings, a ton of weapons and different pylons, as well as a lot of small details that are spot on, it seems to me that KH did a lot of research. That makes the omission of the other IP very surprising to me. LSP_K2 1 Link to comment Share on other sites More sharing options...
Dave Williams Posted December 20, 2019 Share Posted December 20, 2019 5 minutes ago, Kagemusha said: See page one of this thread. If you are talking about the marked up pictures of the C vs. the -5, I don’t think that’s what he’s talking about. There is a post on the KH FB page where someone shows the 4 fins in the kit, and what versions they are correct for. jgrease and Kagemusha 2 Link to comment Share on other sites More sharing options...
jgrease Posted December 20, 2019 Share Posted December 20, 2019 57 minutes ago, Dave Williams said: If you are talking about the marked up pictures of the C vs. the -5, I don’t think that’s what he’s talking about. There is a post on the KH FB page where someone shows the 4 fins in the kit, and what versions they are correct for. Correct Dave. Thanks. Link to comment Share on other sites More sharing options...
rafju Posted December 21, 2019 Share Posted December 21, 2019 On 12/19/2019 at 9:00 PM, Dave Williams said: A good walk around here. https://www.e-redstar.net/gallery/M2000.html Also at Prime Portal. http://www.primeportal.net/hangar/luc_colin3/mirage_2000c_french_af/ one here for -5: http://ffsmc.fr/index.php?/category/92 and for the D: http://ffsmc.fr/index.php?/category/93 alain11 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now