Model_Monkey Posted June 13, 2022 Author Share Posted June 13, 2022 Test prints look good so far. Here are the big parts. These parts are intended to be inserted within the Revell kit's fuselage. Test printing the smaller bits (seat, weapons, ammo drums and racks, radar equipment) is next. D Bellis, LSP_Kevin, LSP_Ray and 14 others 15 2 Link to comment Share on other sites More sharing options...
Pete Fleischmann Posted June 13, 2022 Share Posted June 13, 2022 Holy crap that is so cool! Nicely done!! P Model_Monkey 1 Link to comment Share on other sites More sharing options...
LSP_Ray Posted June 13, 2022 Share Posted June 13, 2022 Wow! That is amazing! Model_Monkey 1 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted June 13, 2022 Share Posted June 13, 2022 Fantastic! Kev Model_Monkey 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted June 13, 2022 Share Posted June 13, 2022 WOW!! That is pretty special indeed. Model_Monkey 1 Link to comment Share on other sites More sharing options...
IainM Posted June 14, 2022 Share Posted June 14, 2022 I'm salivating at the prospect of picking one of these up!! And @Model_Monkey, do you ever intend re-releasing the early style dihedral tailplanes? I know you used to have them in the shop, but haven't seen them listed there anymore... Model_Monkey 1 Link to comment Share on other sites More sharing options...
Scotsman Posted June 14, 2022 Share Posted June 14, 2022 I was around when the Beaufighter kit was first released back in the mid 70s and I remember the review of the kit, "accurate but it needs a proper interior" - nevertheless I built the model then and agreed with that assessment and later I recall seeing both here and also in magazines various attempts by modellers far more skilled than I to rectify these issues. But never in my wildest dreams could I conceive of someone being able to print a complete interior for this model turning it from a relic of the 70's into a modern model - I thank you and I can't wait to get started on my late war TFX Out2gtcha, IainM, Model_Monkey and 1 other 4 Link to comment Share on other sites More sharing options...
Model_Monkey Posted June 14, 2022 Author Share Posted June 14, 2022 (edited) On 6/13/2022 at 10:56 PM, IainM said: And @Model_Monkey, do you ever intend re-releasing the early style dihedral tailplanes? I know you used to have them in the shop, but haven't seen them listed there anymore... Hi Iain! Good news, yes, I do intend to release early dihedral tailplanes. That model is a big design project is in the queue. It will awhile before it is ready but hopefully this year. It will appear again in the catalog once the design is done. Thanks for all the great and encouraging comments, everyone! They are very helpful. Edited June 15, 2022 by Model_Monkey Fixed typo. IainM and Pete Fleischmann 1 1 Link to comment Share on other sites More sharing options...
Model_Monkey Posted June 21, 2022 Author Share Posted June 21, 2022 Work continues on the 1/32 scale Bristol Beaufighter early nightfighter radar operator's station. Test prints of the Hispano-Suiza 20 mm cannon ammunition drums and spare drum racks were successful. The Beaufighter was fit with four 20 mm cannons, making it a very hard-hitting aircraft. Early Beaufighter cannons were fed from portable ammunition drums. The real ammunition drums held up to 60 rounds of 20 mm explosive ammunition. The rear of the drum was perforated with small holes which permitted a person to see how many rounds were loaded in the drum at a glance. Unlike drums fit to cannons inside wings like those of the Spitfire, Hurricane, Typhoon, etc., the Beaufighter's drums had a handle so that the cannons could be rearmed by the radar operator in flight. The model accurately captures the perforations and handle. The bottom of the real racks stood away from the Beaufighter's fuselage sides just a bit. The models accurately capture this feature, too. The model will come with 12 drums, 4 for the cannons and 8 for the racks. Fanes, D Bellis, LSP_Ray and 7 others 10 Link to comment Share on other sites More sharing options...
Out2gtcha Posted June 21, 2022 Share Posted June 21, 2022 Awesome! Really looks spectacular Model_Monkey 1 Link to comment Share on other sites More sharing options...
LSP_Ray Posted June 21, 2022 Share Posted June 21, 2022 Sweet! Model_Monkey 1 Link to comment Share on other sites More sharing options...
Model_Monkey Posted June 24, 2022 Author Share Posted June 24, 2022 (edited) Test prints of the radar equipment, operator's seat, and seat stand are successful. These features would very difficult to build from scratch with accuracy for most modelers. Compare the size of the 5 radar components to the size of the seat. The real gear was big, bulky, heavy and took up a lot of space. Next test prints are the Hispano-Suiza 20 mm cannons and heater duct. Then the model will be ready for sale. Edited June 24, 2022 by Model_Monkey Added comments. D Bellis, LSP_Kevin, Troy Molitor and 4 others 7 Link to comment Share on other sites More sharing options...
Kagemusha Posted June 24, 2022 Share Posted June 24, 2022 A dream come true, thank you! Model_Monkey 1 Link to comment Share on other sites More sharing options...
Steve Eagle Posted June 25, 2022 Share Posted June 25, 2022 Thank you for all your work on this. I’ll surely be a customer for one of these stations. Doing a Mk VI nightfighter that has been on hold since you announced this. Used the cockpit set- beautiful. Model_Monkey 1 Link to comment Share on other sites More sharing options...
Tony T Posted June 27, 2022 Share Posted June 27, 2022 On 6/25/2022 at 2:16 PM, Steve Eagle said: Thank you for all your work on this. I’ll surely be a customer for one of these stations. Doing a Mk VI nightfighter that has been on hold since you announced this. Used the cockpit set- beautiful. I was intending to go down this route too, which really means a thimble nose and AI Mk.VIII installation, but the AI Mk.IV "bow and arrow" nose and interior would be tasty, with uppy tailplane. That just leaves the wheel wells. Fantastic work MM. Tony Model_Monkey 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now