blackbetty Posted March 6, 2023 Share Posted March 6, 2023 (edited) Just putting the finishing touches on Miss Jolly Roger, waiting on a few parts, i pulled out my Revell Tornado Kit. I do have the resin LGBs from Reskit that i wanted to use on the Buccaneer, but it turns out i have the later version with the GPS dome. not wanting to remove the delicate detail, i raided the Tonka kit for the LGBs This is an old kit, maybe obsolete because of the new Italeri kit, but i am going to build it anyway. I had it for a long time and amassed quite soem aftermarket for it: -the ancient flightpath decals -the old paragon resin flaps -some eduard etch for the cockpit -seats from black box -aires burner cans -reskit wheels -and the latest addition: the resin intakes from Tim i missed out on his corrected nose sadly (and he has stopped producing for now) all this will fit the group build theme nicely, and i have grown fond of desert pink lately wish me luck Edited November 23, 2023 by blackbetty Fanes, BradG, KUROK and 16 others 19 Link to comment Share on other sites More sharing options...
Stokey Pete Posted March 6, 2023 Share Posted March 6, 2023 Excellent choice, I’ve always like the Tornado in its desert schemes. Martinnfb 1 Link to comment Share on other sites More sharing options...
Stef Posted March 6, 2023 Share Posted March 6, 2023 Hello blackbetty, i wish you a great start and building. One question, do you know where i can find the resin intakes from Tim & nose correction? Thank you very much. Martinnfb 1 Link to comment Share on other sites More sharing options...
blackbetty Posted March 7, 2023 Author Share Posted March 7, 2023 16 hours ago, Stef said: Hello blackbetty, i wish you a great start and building. One question, do you know where i can find the resin intakes from Tim & nose correction? Thank you very much. sadly Tim does not produce these parts at the moment and its not clear if he will start production again Martinnfb 1 Link to comment Share on other sites More sharing options...
Jet Passion Posted March 13, 2023 Share Posted March 13, 2023 Very interesting project. The 1/32 Revell kit is very nice but check out the underwing pylons as they depict these pieces for German / Italian Tonkas. RAF style pylons are different. We are producing a set to correct this issue. The outer wing pylon is ready, just working on the inner to make a set. Based on serious research and measurements of course. We are producing 32022 Gun Muzzles and some other stuff as well. Keep'em coming. Ed. Martinnfb, BradG, Landrotten Highlander and 10 others 10 3 Link to comment Share on other sites More sharing options...
eoyguy Posted March 13, 2023 Share Posted March 13, 2023 (edited) Nice. Personally I don't see it being obsolete. The Italeri may have improved/more detail, but to my eyes, a lot of it looks typical Italeri-soft. I have about the same stash of stufff for my, plus even more resin including the JP-233's. I should build one of the 4 I have in boxes some day before I die... BTW, I know someone makes the wing seals, I have a set. But they are very easy to make if you are familiar with using some 2 part epoxy putty. And oh, who is Tim re:the intakes and nose, and what is the issue with the nose? Edited March 13, 2023 by eoyguy Martinnfb 1 Link to comment Share on other sites More sharing options...
blackbetty Posted March 13, 2023 Author Share Posted March 13, 2023 the paragon set has the winggloves jet passion i will send you a PM Martinnfb 1 Link to comment Share on other sites More sharing options...
blackbetty Posted April 3, 2023 Author Share Posted April 3, 2023 some stuff came in: the gun muzzles are real tiny and delicate (one of them didnt survive the trip, but there are six of them) Martinnfb, BradG, LSP_Kevin and 6 others 9 Link to comment Share on other sites More sharing options...
blackbetty Posted April 5, 2023 Author Share Posted April 5, 2023 (edited) made a start with fitting the resin parts to the wings. some careful cutting and sanding/scraping is in order to use as little filler as possible Edited April 5, 2023 by blackbetty JayBee, Fanes, Uncarina and 12 others 15 Link to comment Share on other sites More sharing options...
Rick Griewski Posted April 6, 2023 Share Posted April 6, 2023 I will watch this build closely. (I should spend time on my Revell kit. I have no excuse. I found the flap set for Micky-D cheese burger price. Resin pit, intakes and exhausts have been waiting for a while now.) themongoose, Martinnfb and blackbetty 2 1 Link to comment Share on other sites More sharing options...
blackbetty Posted April 18, 2023 Author Share Posted April 18, 2023 still working on the slats. glueing the leadinge edge by letting superglue flow in from the trailing edge prooved to be not so good of an idea, it oozed out and now i can rescribe part of the resin plus it dawned on me that i would have to paint all the parts before glueing everything together denders, Martinnfb, Isar 30/07 and 3 others 6 Link to comment Share on other sites More sharing options...
blackbetty Posted April 19, 2023 Author Share Posted April 19, 2023 i decided to change the subject: instead of Foxi Killer i will do ZA 473 FM "Foxi Mama" i am always on the lookout for planes that no one else builds and since there are the flightpath decals and the new revell boxing also has these "Mama" will be set apart from the rest. and it still has the pink sharkmouth i wanted the loadout will also change to a late war 1000lb MK 3 with 117 tail setup (coming from reskit) screenshot of the decals i am drawing: mc65, Rick Griewski, Rainer Hoffmann and 8 others 11 Link to comment Share on other sites More sharing options...
red Dog Posted April 19, 2023 Share Posted April 19, 2023 Quote i am always on the lookout for planes that no one else builds Originality is priceless blackbetty and Martinnfb 2 Link to comment Share on other sites More sharing options...
blackbetty Posted April 27, 2023 Author Share Posted April 27, 2023 i didnt want to buy an expensive cockpit set, so i use the eduard etch i have for the pit: Landrotten Highlander, Isar 30/07, LSP_Kevin and 4 others 7 Link to comment Share on other sites More sharing options...
blackbetty Posted April 28, 2023 Author Share Posted April 28, 2023 after closing the pit and fixing the halves to carfully align them, this part will be scribed to fit the missing panellines on the bottom LSP_Kevin, BradG, Rick Griewski and 3 others 6 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now