Ali62 Posted July 12, 2020 Share Posted July 12, 2020 As promised here are some of the products that are now started and being worked upon. Wheels and cowling, more will follow, including a further set of wheels and there will be two different undercarriage sets as there is variances, and there will also be a specific engine set, that is currently being drawn in 3D. Many more parts are planned for the aircraft, some more correction/ improvement sets as well as conversion sets, details will follow as the development takes place. shown below are 3D CAD drawings for wheels as well as the printed wheels that are being prepared for casting shown below is the kit cowling and the new 3D CAD cowl, once printed will check fit and details to the kit parts Landrotten Highlander, Troy Molitor, Jan_G and 15 others 16 2 Link to comment Share on other sites More sharing options...
Kagemusha Posted July 12, 2020 Share Posted July 12, 2020 Looks great. Link to comment Share on other sites More sharing options...
Iain Posted July 12, 2020 Share Posted July 12, 2020 Looking good Ali! Iain Link to comment Share on other sites More sharing options...
Out2gtcha Posted July 13, 2020 Share Posted July 13, 2020 Awesome! I'd love to get one of these kits, and is quite reassuring to know there will be some correction parts coming to fix some of it. Link to comment Share on other sites More sharing options...
Learstang Posted July 14, 2020 Share Posted July 14, 2020 Count me in for some of these correction sets! Best Regards, Jason Link to comment Share on other sites More sharing options...
Ali62 Posted July 20, 2020 Author Share Posted July 20, 2020 Hi Guys see my post here on page 27, I think this project has stalled for me, I do apologise cheers Ali Link to comment Share on other sites More sharing options...
Martinnfb Posted July 20, 2020 Share Posted July 20, 2020 Good call with the cowling Ali and thanks for your efforts. If you can add a set of closed cooling flaps that would be lovely Cheers Martin Jan_G and Out2gtcha 2 Link to comment Share on other sites More sharing options...
Ali62 Posted September 21, 2020 Author Share Posted September 21, 2020 I have continued to tinker away at a few things and as I gave said elsewhere in my section on other topics, life has been very busy but hope to share some news with you all soon. The Phantom and Dennis7423 1 1 Link to comment Share on other sites More sharing options...
Ali62 Posted November 7, 2020 Author Share Posted November 7, 2020 (edited) Some sneak previews and news about what I have been up to over the past few months. A few months ago I took the plunge and invested in 3D software and 3D printers.......and upto that point I had no experience in 3D drawing personally or to do the printing. Previously I always had to rely on others to do the drawing and Shapeways or similar to do the printing. Well I jumped in at the deep end and I have developed some parts and printed them myself (not without a lot of torture, late nights, frustration and lots of wasted resin) BUT that is what it takes to self teach yourself new skills and fathom things out. Next up is an engine set that I am working on for the Hobby Boss 1/32 A-26 Invader. A friend of mine developed the front cowling but over time I have modified that, the rest of the parts are drawn and developed by myself, the first picture shows the kit part and the new part, the rest are various pictures from various angles. All of this will take time but I hope to have this out fairly soon and have a few other ideas for the A-26. Edited November 7, 2020 by Ali62 Dennis7423, dutik, Martinnfb and 9 others 11 1 Link to comment Share on other sites More sharing options...
elric Posted November 8, 2020 Share Posted November 8, 2020 great news, can't wait for the cowling not just for the Invader, they also were used on Reno race planes such as the Sea Furys & Bearcats Bob Link to comment Share on other sites More sharing options...
F2G_lover Posted November 13, 2020 Share Posted November 13, 2020 On 11/8/2020 at 7:16 AM, elric said: great news, can't wait for the cowling not just for the Invader, they also were used on Reno race planes such as the Sea Furys & Bearcats Bob That's awesome, I've been dreaming of building the Bud Light Super Corsair racer for years, and that had an A-26 cowl too. Link to comment Share on other sites More sharing options...
seiran01 Posted November 13, 2020 Share Posted November 13, 2020 I didn't know that about the race planes, but it's awesome to hear that there are more applications than just the Invader! Link to comment Share on other sites More sharing options...
aircommando130 Posted November 26, 2020 Share Posted November 26, 2020 That's awesome! The On Mark A-26 was a gorgeous airplane! Maybe some new cowlings for the 32nd B-25 with the right cowl opening....hint, hint Cheers...Ron Link to comment Share on other sites More sharing options...
seiran01 Posted November 27, 2020 Share Posted November 27, 2020 1 hour ago, aircommando130 said: That's awesome! The On Mark A-26 was a gorgeous airplane! Maybe some new cowlings for the 32nd B-25 with the right cowl opening....hint, hint Cheers...Ron There’s an issue with the HK cowls? Link to comment Share on other sites More sharing options...
aircommando130 Posted November 27, 2020 Share Posted November 27, 2020 The opening in the front where you see the engine is to small. Guys sand it open bigger but I'm afraid it won't be round after I try to do it! Cheers...Ron Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now