imatt88 Posted January 22, 2018 Share Posted January 22, 2018 Oooooooo, can hardly wait Link to comment Share on other sites More sharing options...
Pastor John Posted January 22, 2018 Author Share Posted January 22, 2018 (edited) Hi everyone, I am including two new parts in the 110 sets, sadly too late for the first 50 sets that have left. The Morane antenna is almost impossible to spot unless you are looking for it and with it not being on the Hendon example or in the scale plans I was looking at I did not know it was there till a photo was sent me. My antenna is a little too thick really but any thinner and I could not cast it and PE is too thin. As for the fairing - I always knew something had to be there but I do not as a rule like to make parts based on incomplete information and only recently got a clear photo sent me and even then it is not does not give a perfect understanding of the part but if you are not doing a G-2 or a G-4 with a gun pod or ETC rack what I have done might save you some work. It seems a very bad way to reward the loyalty of those who paid the quickest but I cannot send out these parts post free - so anyone who has received their kit or was emailed to say it is on the way will not have these parts, if you want them please send £2.50 for the postage to Europe and £3.50 postage anywhere else - that is the best I can do. Thanks for your understanding .......Please please please include correct address in the Notebox Edited January 22, 2018 by Pastor John LSP_Kevin, LSP_Matt, Alburymodeler and 2 others 5 Link to comment Share on other sites More sharing options...
Pastor John Posted January 22, 2018 Author Share Posted January 22, 2018 Shawn M, catbloke, monthebiff and 1 other 4 Link to comment Share on other sites More sharing options...
Shawn M Posted January 22, 2018 Share Posted January 22, 2018 John, for those of us who have our kits or those enroute, could you provide a scale drawing of the antennae so we can scratch build them? Link to comment Share on other sites More sharing options...
Pastor John Posted January 22, 2018 Author Share Posted January 22, 2018 If you have a late 109 or a 262 kit in the stash you will have one to measure or copy - the mast is approx 22mm long and tapered so it is approx 1.5mm at the bottom and 1mm at the top then there is an 11mm long curved wire. width of mast appears to be no more than 0.7mm. kalashnikov-47, Shawn M and D Bellis 3 Link to comment Share on other sites More sharing options...
Guest Vulcan32 Posted January 22, 2018 Share Posted January 22, 2018 Both sets arrived today, you did a great job, thanks. Out2gtcha and Pastor John 2 Link to comment Share on other sites More sharing options...
Gerhard Posted January 22, 2018 Share Posted January 22, 2018 Nice work John. Link to comment Share on other sites More sharing options...
Guest Vulcan32 Posted January 22, 2018 Share Posted January 22, 2018 There are just a few mistakes on the decals. Sofort, not Sofurt bei, not hei Polizeidienststelle, not Pulizeidienstelle Kraftstoffbehälter, not Kraftstuffhehältter Rick Griewski 1 Link to comment Share on other sites More sharing options...
Shawn M Posted January 22, 2018 Share Posted January 22, 2018 If you have a late 109 or a 262 kit in the stash you will have one to measure or copy - the mast is approx 22mm long and tapered so it is approx 1.5mm at the bottom and 1mm at the top then there is an 11mm long curved wire. width of mast appears to be no more than 0.7mm. perfect, thank you John Rick Griewski 1 Link to comment Share on other sites More sharing options...
Pastor John Posted January 22, 2018 Author Share Posted January 22, 2018 Shame I got some spellings wrong on the stencils - either do not look at your model with a microscope or use the kits stencils! I did these stencils 3 years ago for my Stab 110 decal sheet as my C-7 kit had no stencils - only now I hear that there are some mistakes - sad I did not know earlier. Rick Griewski and monthebiff 2 Link to comment Share on other sites More sharing options...
alaninaustria Posted January 23, 2018 Share Posted January 23, 2018 Pastor John, there are a few of us here on site who speak German - I'm sure many of us wouldn't mind helping out with a proof reading - if you want at some future point! Cheers Alan Rick Griewski and monthebiff 2 Link to comment Share on other sites More sharing options...
Pastor John Posted January 23, 2018 Author Share Posted January 23, 2018 Thanks Alan, I have just realised that the stencils in question were on the drop tanks, I used a Revel kit 109 decal scanned in to copy the approx size and copied the letters one at a time but obviously the scan was not crystal clear and I have miss identified some of the letters Link to comment Share on other sites More sharing options...
Gerhard Posted January 23, 2018 Share Posted January 23, 2018 Not a train smash and will really only bother the rivet counters. Shawn M and Rick Griewski 2 Link to comment Share on other sites More sharing options...
mozart Posted January 23, 2018 Share Posted January 23, 2018 Doesn't bother me in the slightest; I wondered where the errors were but now that I know they're on the drop tanks I care even less! Max Rick Griewski and Shawn M 2 Link to comment Share on other sites More sharing options...
Rick Griewski Posted January 24, 2018 Share Posted January 24, 2018 If you have a late 109 or a 262 kit in the stash you will have one to measure or copy - the mast is approx 22mm long and tapered so it is approx 1.5mm at the bottom and 1mm at the top then there is an 11mm long curved wire. width of mast appears to be no more than 0.7mm. I just checked the spares box and I am amazed how many of these I antenna have. So... No worries. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now