geedubelyer Posted February 3, 2022 Share Posted February 3, 2022 Hi guys, As I was browsing the Jetmads web page I spotted the section for 1/18th scale. Is there already a topic discussing these future releases? Jetmads 1/18th scale releases here Cheers. Derek B, Out2gtcha, Violator1991 and 2 others 4 1 Link to comment Share on other sites More sharing options...
zerosystem Posted February 3, 2022 Share Posted February 3, 2022 Curious what the ballpark price might be for a Skyhawk... geedubelyer and KiwiZac 2 Link to comment Share on other sites More sharing options...
Out2gtcha Posted February 4, 2022 Share Posted February 4, 2022 I believe they are still a ways away atm, as I have not seen them announced in any of their lineup announcements. geedubelyer 1 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted February 4, 2022 Share Posted February 4, 2022 Oooh I'd be up for a Skyhawk if it were an E/F How cool, I never heard they were doing these KiwiZac, Derek B and geedubelyer 3 Link to comment Share on other sites More sharing options...
geedubelyer Posted February 4, 2022 Author Share Posted February 4, 2022 7 hours ago, zerosystem said: Curious what the ballpark price might be for a Skyhawk... Likewise. It will be interesting to see what any of them cost. 6 hours ago, Out2gtcha said: I believe they are still a ways away atm, as I have not seen them announced in any of their lineup announcements. Plenty of time to start squirelling some money away. 1 hour ago, Anthony in NZ said: Oooh I'd be up for a Skyhawk if it were an E/F How cool, I never heard they were doing these Quite interesting choices. Nothing too big in that line-up so they should be manageable at 1/18th scale. The F-5 would be quite a large chunk though? Am I correct in thinking that early F-5 Freedom Fighters were bare metal? If so that is very appealing. I like the idea of attempting to skin one in metal. Thanks for the replies guys. Guess we all need to watch this space and keep our fingers crossed. Cheers. phasephantomphixer and Anthony in NZ 2 Link to comment Share on other sites More sharing options...
Sabrejet Posted February 4, 2022 Share Posted February 4, 2022 These 1/18 kits have been listed on JETMADS website since the D.558-I was in development. Since then it would seem that releases follow no particular pattern, but for sure it's a case of "we'll know when we know". But again, we will get a bit of notice that they are in development. Either way, I wouldn't expect floods of releases in that scale: maybe after JETMADS have done five 1/32 kits they'll feel confident enough of the market and have established their reputation to risk the (considerable) investment. geedubelyer 1 Link to comment Share on other sites More sharing options...
Royboy Posted February 4, 2022 Share Posted February 4, 2022 1 hour ago, Sabrejet said: These 1/18 kits have been listed on JETMADS website since the D.558-I was in development. Since then it would seem that releases follow no particular pattern, but for sure it's a case of "we'll know when we know". But again, we will get a bit of notice that they are in development. Either way, I wouldn't expect floods of releases in that scale: maybe after JETMADS have done five 1/32 kits they'll feel confident enough of the market and have established their reputation to risk the (considerable) investment. I think they're all good choices and I'd be up for all of them actually! geedubelyer 1 Link to comment Share on other sites More sharing options...
Violator1991 Posted February 4, 2022 Share Posted February 4, 2022 That's a good topic! More than anything else I've been curious about their planned 1/18 future releases from the beginning. My favourites are the F-5 and the A-4 but I'd go with the A-37 too if it comes first. F-5 in 1/18 is 80+cm long and this is a must for me as the type is one of my all time favorite aircraft. Maybe too early to to talk about or guess, but F-5B would also be a stellar release. E/F of the A-4 is my first choice, but I will be more than happy if a two seater of the Skyhawk comes too, for I find the trainers and two seaters of most jets to have more graceful lines. I guess the A-37 Dragonfly could be their first 1/18 release. The real airplane is only 9m in length, making its 1/18 kit 50cm long. That is a really nice size to present a charming aircraft in 1/18 and it is just about 2cm short of the 1/32 Viggen. The main factors in pricing a resin kit (or maybe all kits of any material) should be its size. Bigger kits mean more material, both printing and casting resin in this case, and larger moulds. Assuming a 1/18 kit should offer even more details than 1/32 scale and depending on what kind of extras will be offered (like metal landing gears, turned brass or maybe a Quinta grade cockpit detail and so on), I would expect the price of these 1/18 releases to be around $250 for the A-37 and $300-350 level for the A-4and the F-5, which seems reasonable to me. I'll assess what is being offered, in case the prices came higher. There are some other aircraft I would be crazy to see in 1/18, like the F-4 and F-104, but I am not sure if this ever happens. Maybe they could consider them if the already announced ones make success. Anthony in NZ, mattcour and geedubelyer 3 Link to comment Share on other sites More sharing options...
phasephantomphixer Posted February 5, 2022 Share Posted February 5, 2022 1 hour ago, Violator1991 said: That's a good topic! More than anything else I've been curious about their planned 1/18 future releases from the beginning. My favourites are the F-5 and the A-4 but I'd go with the A-37 too if it comes first. F-5 in 1/18 is 80+cm long and this is a must for me as the type is one of my all time favorite aircraft. Maybe too early to to talk about or guess, but F-5B would also be a stellar release. E/F of the A-4 is my first choice, but I will be more than happy if a two seater of the Skyhawk comes too, for I find the trainers and two seaters of most jets to have more graceful lines. I guess the A-37 Dragonfly could be their first 1/18 release. The real airplane is only 9m in length, making its 1/18 kit 50cm long. That is a really nice size to present a charming aircraft in 1/18 and it is just about 2cm short of the 1/32 Viggen. The main factors in pricing a resin kit (or maybe all kits of any material) should be its size. Bigger kits mean more material, both printing and casting resin in this case, and larger moulds. Assuming a 1/18 kit should offer even more details than 1/32 scale and depending on what kind of extras will be offered (like metal landing gears, turned brass or maybe a Quinta grade cockpit detail and so on), I would expect the price of these 1/18 releases to be around $250 for the A-37 and $300-350 level for the A-4and the F-5, which seems reasonable to me. I'll assess what is being offered, in case the prices came higher. There are some other aircraft I would be crazy to see in 1/18, like the F-4 and F-104, but I am not sure if this ever happens. Maybe they could consider them if the already announced ones make success. Although toylike, my two 21st Century 1/18 F-104's (George AFB - Canada Tiger Meet) as ceiling hangers along with F-86 and Mig-15 do the job just fine. Along with F-5, a T-38, F-16, or A-7 should also cost reasonably. I would pay more for an F-4, or finish me off with a correct A-10! IvanVasili, geedubelyer and Violator1991 3 Link to comment Share on other sites More sharing options...
Violator1991 Posted February 5, 2022 Share Posted February 5, 2022 10 hours ago, phasephantomphixer said: Although toylike, my two 21st Century 1/18 F-104's (George AFB - Canada Tiger Meet) as ceiling hangers along with F-86 and Mig-15 do the job just fine. Along with F-5, a T-38, F-16, or A-7 should also cost reasonably. I would pay more for an F-4, or finish me off with a correct A-10! Yeah, 21st Century F-104's (and other ones of the series) are nice as ceiling hangers. I have one and hope to convert it to a detailed Starfighter one day, but it's way better for me if someone makes a fully detailed kit before I start Totally agree with your other suggestions, especially with the 1/18 F-16. That would be phenomenal if fully detailed. The F-16 is slightly longer than the F-5 so I don't see a reason why not, assuming the F-5 comes correctly. T-38 would be great too but we already do not have it in 1/32 so that would do good as well even in that scale. 1/18 F-4? That's one of my dreams. Really. But I'm not sure if it is doable with resin material. Probably too large and heavy, I'm not sure it is possible to maintain consistent shrinkage rate of the resin. But if onyone makes it one day I'll be their first customer for a few copies... IvanVasili, geedubelyer and phasephantomphixer 3 Link to comment Share on other sites More sharing options...
IvanVasili Posted February 5, 2022 Share Posted February 5, 2022 I think there's some life here, though it is a niche market. There will be modellers and collectors who will be interested in these releases and I may be one of them if the kits come with a good price. I have a 1/18 Hobbyboss Harrier, not built yet but I tested a dry fit. That's my first 1/18 kit and the size is absolutely beautiful, too much potential for detailing. However the details of the kit is really horrible in some places like the intakes and the leading edge extensions of the wing. Anyhow, I may be easily tempted for further 1/18 kits. A-4 Skyhawk would be my first choice from Jetmads but the other two is also ok. 250-300 dollars range may be fine but these are supposed to be heavy kits and the shipping costs may not be low considering there is no such thing as cheap shipment anymore. geedubelyer, mattcour, Royboy and 3 others 6 Link to comment Share on other sites More sharing options...
mattcour Posted February 6, 2022 Share Posted February 6, 2022 A-4 Skyhawk is my first choice. F-5B will be great too. What will be even more great is if they ever do F-18 and Mirage F1 in 1/18th scale! geedubelyer 1 Link to comment Share on other sites More sharing options...
geedubelyer Posted February 6, 2022 Author Share Posted February 6, 2022 (edited) If we're putting a wishlist together may I add my vote for an F-15 please? 42" or 106cm long. She'd be a big girl and that's for sure. Probably better to stick with more, umm, pert jets? Edited February 6, 2022 by geedubelyer Link to comment Share on other sites More sharing options...
babyduck5 Posted February 6, 2022 Share Posted February 6, 2022 I would love to get the A-4. By the depiction of the canopy, it looks like the M model. Which is fine by me. That is the sexiest of the Skyhawks. geedubelyer and zerosystem 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now