Gazzas Posted July 9, 2019 Share Posted July 9, 2019 Looking good, Andy! monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted July 11, 2019 Author Share Posted July 11, 2019 So I have managed to get the fuselage blaze colours painted and the few decals on ready for sealing in. Also need to complete the painting of the metalwork and move on to weathering. Planning a heavily castor oil stained finish on this one. Regards. Andy LSP_K2, LSP_Kevin, tucohoward and 6 others 9 Link to comment Share on other sites More sharing options...
Fvdm Posted July 12, 2019 Share Posted July 12, 2019 This is looking real great Andy. monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted July 14, 2019 Author Share Posted July 14, 2019 Had a crack at painting the metal work using a base of Tamiya flat aluminium followed by Gunze Mr Metal aluminium and pretty happy with the result. Also build , painted and rigged the undercarriage in readiness for installation. Bob's buckles , Gaspatch turn buckles and mono filament used. Need to paint the cockpit padding on the fuselage, then some weathering before getting on to final assembly. Regards. Andy tucohoward, LSP_K2, Fvdm and 2 others 5 Link to comment Share on other sites More sharing options...
monthebiff Posted July 20, 2019 Author Share Posted July 20, 2019 (edited) Managed to get a little more done on this one over the last couple of days, firstly engine, cowling and M G fitted. Followed by making a start on weathering and trying to begin building up the castor oil staining on the fuselage A little stark at the moment but all being well will become a little more blended as I go along and hopefully I've not messed it up! Regards. Andy Edited July 21, 2019 by monthebiff TorbenD, LSP_Kevin, rjones726 and 2 others 5 Link to comment Share on other sites More sharing options...
rjones726 Posted July 21, 2019 Share Posted July 21, 2019 Love the Castor oil staining. I don't think it's possible to overdo as they quickly got pretty nasty. Hopefully you're still having fun v/r, Rob monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted July 21, 2019 Author Share Posted July 21, 2019 3 minutes ago, rjones726 said: Love the Castor oil staining. I don't think it's possible to overdo as they quickly got pretty nasty. Hopefully you're still having fun v/r, Rob Pretty sure I could go more with it but not sure yet, looking at some of the pictures of these Fokkers I guess I could just paint the whole of the lower fuselage and a lot of the sides with my oil mix and not be to far wrong. Thanks for looking in Rob and yes I'm still loving this build. So far its been lots of fun and can see the finishing post not to far away! Regards. Andy rjones726 1 Link to comment Share on other sites More sharing options...
Troy Molitor Posted July 21, 2019 Share Posted July 21, 2019 Looking good Andy. I love the effect on the oil staining. Troy monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted August 6, 2019 Author Share Posted August 6, 2019 Not had much time on this recently but now have the undercarriage fitted and rigging completed and much as possible before fitting the wings. Getting there now and pretty happy with results using monofilament as rigging for the first time. So much nicer to use and look at with no twists to spoil the look. Regards. Andy Fvdm, LSP_Kevin, LSP_K2 and 4 others 7 Link to comment Share on other sites More sharing options...
themongoose Posted August 6, 2019 Share Posted August 6, 2019 Lovely monthebiff 1 Link to comment Share on other sites More sharing options...
Gazzas Posted August 7, 2019 Share Posted August 7, 2019 Love the staining, Andy! monthebiff 1 Link to comment Share on other sites More sharing options...
Dryden Posted August 7, 2019 Share Posted August 7, 2019 Beautiful Andy. Getting ready to start on mine next week Dryden monthebiff 1 Link to comment Share on other sites More sharing options...
monthebiff Posted November 30, 2019 Author Share Posted November 30, 2019 A little more done on the Eindecker, Staining added to the upper and lower wings in readiness for final assembly and rigging. Not to much left to do in this one now, just need a couple of good sessions at the bench to complete it. Regards. Andy scvrobeson, RLWP, LSP_Kevin and 2 others 5 Link to comment Share on other sites More sharing options...
tucohoward Posted November 30, 2019 Share Posted November 30, 2019 Fantastic work, Andy! Jay Link to comment Share on other sites More sharing options...
Uncarina Posted December 1, 2019 Share Posted December 1, 2019 Andy, Spectacular. Navigating that maze of rigging must take some serious skills! Cheers, Tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now