Bruce_Crosby Posted September 21, 2018 Share Posted September 21, 2018 (edited) Hi Guys, Yesterday I finished off a commission from Aviattic to build the WNW Junkers D.1 all metal monoplane fighter. My first Wing Nut, my first WWI fighter ever. AND a deadline to stick to, which saw going to be November but last week changed to last night! So the photos of the finished model are a bit dire, snapped on my iPhone as it sat near the spray booth. Parts clean up: The Mercedes engine in the kit was changed to a higher powered BMW engine. There was some hacking and chopping to get the engine to fit! A dry fit of the cockpit parts. Very tight! Regards, Bruce Crosby Edited September 21, 2018 by Bruce_Crosby Reduce captions LSP_K2, LSP_Kevin, bstachel and 1 other 4 Link to comment Share on other sites More sharing options...
Bruce_Crosby Posted September 21, 2018 Author Share Posted September 21, 2018 (edited) Part 2 Aviattic supplied GasPatch 3D printed guns for the model. Simply stunning! Fuel tank and some framework painted! Proper Planes real wood propeller! Regards, Bruce Crosby Edited September 21, 2018 by Bruce_Crosby LSP_Kevin, sandokan and bstachel 3 Link to comment Share on other sites More sharing options...
Bruce_Crosby Posted September 21, 2018 Author Share Posted September 21, 2018 (edited) Part 3 Test fit of the engine, engine mounts and bulkhead assembly. Masking the framework contact areas on the inside face of the fuselage. Even a slight layer of paint here would be enough to stop assembly further on. Paint! Some real assembly at last Regards, Bruce Crosby Edited September 21, 2018 by Bruce_Crosby Reduce captions Lenny320, LSP_Kevin, bstachel and 1 other 4 Link to comment Share on other sites More sharing options...
Bruce_Crosby Posted September 21, 2018 Author Share Posted September 21, 2018 (edited) Part 4 Wing assembly The model was to be finished in bare Dural and photos of the real D.1 show a sort of monochrome stripe pattern on alternate panels. So here's Aizu Micron masking tape being applied over Mission Models Dural. One of the first attempts at getting the contrasting metal shades. We soon agreed the contrast was way too stark and I had to find a way to reduce it. I ended up making a glaze, using Mission Models Dural, a drop of their Dark Alu, a drop of red, some Satin Varnish and a squirt of their Thinners. Some parts got one mist over, some got two. This left pale shades for the ribs and two darker shades for the panels. I rate MMP very highly and have had hours of fun with their colours and a couple of airbrushes playing around and learning what it can do, which is just about everthing! And now you're thinking, "Why is there a round mask on a German aircraft that has crosses?" See the next thrilling instalment! Regards, Bruce Crosby Edited September 21, 2018 by Bruce_Crosby LSP_Kevin, D.B. Andrus, bstachel and 1 other 4 Link to comment Share on other sites More sharing options...
Shawn M Posted September 21, 2018 Share Posted September 21, 2018 I was just drooling on this over on your Flickr page, gorgeous work Link to comment Share on other sites More sharing options...
Bruce_Crosby Posted September 21, 2018 Author Share Posted September 21, 2018 (edited) Hi Guys, As per usual, Windows threw me out of LSP as I was 90% thru the next reveal so its start again time. The model is part of Aviattic's LuftKrieg 1919 scenario where the Soviets expanded rapidly and joined up with China in 1919. This aircraft depicts a Japanese aircraft flown by a woman pilot in Europe in that fictitious war. I used Maketar rice paper masks to conform to the corrugated surfaces and the my own masks cut on the Silhouette for the fuselage markings which are a stylised Japanese arrow motif. I used GSi Creos/Gunze Japanes Hinomaru Red from the set for the N1K2, had to import it as it isn't sold in the UK. It's transparent so has to be built up in layers and it shows the metal shading slightly when you see it for real. Underneath Markings after removing the masks Tyres in natural rubber, no added carbon. Guns on, engine panelled, exhaust fitted. The Exhaust is painted with Mission Models Burnt Iron 1 which has a very fine fleck in it and I think it looks far better than the usual orange/pink rust that modellers tend to use nowadays. RG seatbelts thrown back over the fuselage for rapid pilot entry Junk1 by Bruce Crosby, on Flickr Well, that's all there is. Didn't take any really good final photos as I really was pushed for time on this one! Regards, Bruce Crosby Edited September 21, 2018 by Bruce_Crosby Reduce captions The Dude, Gazzas, Whitey and 9 others 12 Link to comment Share on other sites More sharing options...
Out2gtcha Posted September 21, 2018 Share Posted September 21, 2018 WOW! That looks tremendous! Fast as all get out too................well done! Link to comment Share on other sites More sharing options...
LSP_K2 Posted September 21, 2018 Share Posted September 21, 2018 Real nice progress here, and those MG's look brilliant. Link to comment Share on other sites More sharing options...
Shawn M Posted September 21, 2018 Share Posted September 21, 2018 absolutely LOVE it well done Link to comment Share on other sites More sharing options...
Bill_S Posted September 21, 2018 Share Posted September 21, 2018 Very well done! I like the Aizu tape on the mating surfaces... Link to comment Share on other sites More sharing options...
Bruce_Crosby Posted September 21, 2018 Author Share Posted September 21, 2018 Hi Bill, The Aizu tape was only for precision masking, there wasn't really any other way to get the fine demarcation required. I really enjoyed making this model for Aviattic, so much that I bought one for myself! When that will get made, no idea as I've still got lots of other half built models that need work, plus a Tamiya Mossie for a friend and also another commission that needs attention. Who said retirement was boring? I'm having a great time making models, playing with airbrushes and scalpels and sanders all day long! Regards, Bruce Crosby MikeMaben 1 Link to comment Share on other sites More sharing options...
Bruce_Crosby Posted September 21, 2018 Author Share Posted September 21, 2018 (edited) Hi Guys, A bit out of sequence as I realised I hadn't uploaded all the photos to Flickr. I hadn't sent the photos that show the masking of the fuselage markings, so here goes. Here's the mask still on the sheet. I did two sizes as I couldn't visualise which would be better. I had already masked and sprayed the white background. And as luck would have it, here's the white background. The mask in place, the smaller of the two sizes. Here's the landing gear assembled but not fitted. And my big sweaty hand to show how small this aircraft is. The Silhouette was a major investment last year but has opened lots of possibilities, like building this particular aircraft in these markings. Plus I've done German crosses and US Stars'n'Bars and codes on other models. Regards, Bruce Crosby Edited September 21, 2018 by Bruce_Crosby bstachel, LSP_Kevin and sandokan 3 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted September 21, 2018 Share Posted September 21, 2018 That's brilliant, Bruce! This kit will probably be my first Wingnut Wings adventure too, though I doubt it will come out as nicely as yours. Kev Link to comment Share on other sites More sharing options...
Bruce_Crosby Posted September 21, 2018 Author Share Posted September 21, 2018 Hi Kev, It's a stunningly beautiful bit of plastic IMHO, you don't realise how good until you airbrush some primer on it, then all manner of things suddenly pop out at you. I recommend the thinnest possible primer, absolutely NO PAINT on any mating or joining surface. Otherwise it just won't go together. Seriously, that's one of my favourite models of anything, ever! And I'm heavily into FW-190D-9's and T-54/55 tanks! So to go from them to a German WWI all metal monoplane really was a leap into the dark (I was scared that I'd totally screw it up) and it took a leap of faith by Richard Andrews at Aviattic to trust me with it. If you've seen his stuff you'll know he has extremely high production standards. Thank goodness he did take that leap of faith because I learnt a lot and had fun along the way. But build it, have fun with it, show it to us. Regards, Bruce Crosby LSP_Kevin 1 Link to comment Share on other sites More sharing options...
MikeMaben Posted September 22, 2018 Share Posted September 22, 2018 Honestly I think that's an ugly airplane. But you made it look just lovely Nice work Bruce ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now