Jump to content

Plm

LSP_Members
  • Content Count

    105
  • Joined

  • Last visited


Reputation Activity

  1. Thanks
    Plm got a reaction from chuck540z3 in KH T-6/Harvard Kicked Up A Notch: Mar 30/20: Decals Done   
    Don't forget that the Harvard has a longer rear canopy section.
     
    I don't think that it is included in the KH kit.
     
    Alleycat produced a clear rear part for the Harvard.
     
    Philippe
     
  2. Like
    Plm got a reaction from daveculp in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  3. Like
    Plm got a reaction from David66 in First test shot's of DACO's new Fouga Magister.   
    Well I need at least two kits.
     
    My father flew the Fouga in the Armée de l'Air at Cognac or Aulnat air force bases.
     

     

     

  4. Like
    Plm got a reaction from Seversky in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  5. Like
    Plm got a reaction from Kais in P-47D-25 & P-47D-30 1/32 Hasegawa   
    Hello,
     
    I never said that your star was not OK.
     
    I just want to point out the way the intercooler doors are painted.
     
    I added arrows on the pictures below to show that it misses a little white and blue of the insignia bar on the intercooler door.
     
     

     
     
     

     
    Hope it'll help.
     
    Philippe
  6. Like
    Plm got a reaction from Durangokid in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  7. Thanks
    Plm got a reaction from RAF Liberators in HobbyBoss B-24 Liberator   
    Hope mine will be as beautiful when I'll built it. 
  8. Like
    Plm got a reaction from nmayhew in P-47D-25 & P-47D-30 1/32 Hasegawa   
    Hello,
     
    I never said that your star was not OK.
     
    I just want to point out the way the intercooler doors are painted.
     
    I added arrows on the pictures below to show that it misses a little white and blue of the insignia bar on the intercooler door.
     
     

     
     
     

     
    Hope it'll help.
     
    Philippe
  9. Like
    Plm got a reaction from GROWLER 96 in P-47D-25 & P-47D-30 1/32 Hasegawa   
    Hello,
     
    I never said that your star was not OK.
     
    I just want to point out the way the intercooler doors are painted.
     
    I added arrows on the pictures below to show that it misses a little white and blue of the insignia bar on the intercooler door.
     
     

     
     
     

     
    Hope it'll help.
     
    Philippe
  10. Like
    Plm got a reaction from GROWLER 96 in P-47D-25 & P-47D-30 1/32 Hasegawa   
    Absolutly stunning,
     
    You should correct the star and bar on the side doors.
    The doors slide forward in the fuselage when they open, so in the door position you choose, the vertical front blue bar is hidden in the fuselage and the white and blue cover all the top of the door.
     
    A picture of one of my P-47 may help you to understand my bad explanations.

  11. Like
    Plm got a reaction from D.B. Andrus in P-47D-25 & P-47D-30 1/32 Hasegawa   
    Hello,
     
    I never said that your star was not OK.
     
    I just want to point out the way the intercooler doors are painted.
     
    I added arrows on the pictures below to show that it misses a little white and blue of the insignia bar on the intercooler door.
     
     

     
     
     

     
    Hope it'll help.
     
    Philippe
  12. Like
    Plm got a reaction from Nic C.D. in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  13. Like
    Plm got a reaction from MARU5137 in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  14. Like
    Plm got a reaction from Uncarina in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  15. Like
    Plm got a reaction from red baron in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  16. Like
    Plm got a reaction from Marcel111 in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  17. Like
    Plm got a reaction from Isar 30/07 in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  18. Like
    Plm got a reaction from J.J. in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  19. Like
    Plm got a reaction from Tolga ULGUR in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  20. Like
    Plm got a reaction from Old Dog in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  21. Like
    Plm got a reaction from Starfighter in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  22. Like
    Plm got a reaction from Trak-Tor in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  23. Like
    Plm got a reaction from blackbetty in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  24. Like
    Plm got a reaction from LSP_Ray in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
  25. Like
    Plm got a reaction from LSP_Kevin in OV-10D Bronco KittyHawk 1/32   
    Hi,
     
    Here is the second one of the year. After the Tempest, I continue in the propellers but in more modern way.
     
    I added the Aerocraft metal landing gear wich are much more rigid than the kit ones.
     
    As for my P-61, I added a metal spar that covers the entire span, highly recommended because the bonding surfaces are very small between the three parts of wings and beams.
    Markings are painted with masks cut with the Silhouette.
    The armament configuration is totally invented.
     

     

     

     

     

     
    Hope you like it.
     
    This is my second KH kit after the Kingfisher and they are not so difficult to built if you take your time.
     
    Philippe.
     
×
×
  • Create New...