D.B. Andrus Posted October 12, 2019 Share Posted October 12, 2019 Anyone else find the 7 piece cowling a pain when you want a closed engine? What about a one piece cowling? Interested or no? Cheers, D.B. mhorina 1 Link to comment Share on other sites More sharing options...
LSP_K2 Posted October 12, 2019 Share Posted October 12, 2019 My own 190F-8 was stalled when I went to assemble the multi-piece cowling, and much of that was my own fault, being in too much of a hurry. Otherwise I suspect it would have gone as smooth as the rest of the kit did for me. Assuming I do eventually grab another kit, a one piece cowling might just be very appealing. Link to comment Share on other sites More sharing options...
D.B. Andrus Posted October 12, 2019 Author Share Posted October 12, 2019 1 hour ago, Jennings Heilig said: 'd be interested in a single piece cowling. I had Paul Fisher mold some of the teardrop fairing parts from the Hasegawa kit (which have a more accurate shape and detail). They're pretty much a drop fit into the Revell cowling. I've made a supply of those fairings. They correct the shape and the lower panel line location for the Revell kit. Keep an eye on the Vendor's Board in the not too distant future. AlanG, Uncarina, LSP_K2 and 5 others 8 Link to comment Share on other sites More sharing options...
Mikester Posted October 13, 2019 Share Posted October 13, 2019 I'd love to see that with an integrated engine plug like the Hasegawa kits. Really don't have any interest in fiddling around assembling an engine that will never be seen with panels closed anyway. Lothar 1 Link to comment Share on other sites More sharing options...
thierry laurent Posted October 13, 2019 Share Posted October 13, 2019 1 hour ago, Mikester said: I'd love to see that with an integrated engine plug like the Hasegawa kits. Really don't have any interest in fiddling around assembling an engine that will never be seen with panels closed anyway. My question may look weird but why not getting the Hasegawa kit? Jack, D Bellis and Mikester 3 Link to comment Share on other sites More sharing options...
Mikester Posted October 13, 2019 Share Posted October 13, 2019 5 hours ago, thierry laurent said: My question may look weird but why not getting the Hasegawa kit? Oh I have about 10 Hasegawa 190's in the stash and I love them, but I got a REALLY good deal on the Revell F-8s ($6 each) so I just couldn't pass them up. Rick Griewski, Lothar and LSP_K2 2 1 Link to comment Share on other sites More sharing options...
cbk57 Posted October 15, 2019 Share Posted October 15, 2019 Old Hasegawa vs new Revell kit. To my eye the surface detail on the new Revell kit looks better. I found the wheel bays and cockpit to be disappointing in the Hasegawa kit. I agree with simplifying the engine cowling. If the cowling has to be fixed open I am not that interested so would close it up. I personally would go for the Revell kit over Hasegawa at this point. I may buy one, have been thinking about it but have too many other projects going to make it a priority. Link to comment Share on other sites More sharing options...
Darren Howie Posted October 17, 2019 Share Posted October 17, 2019 On 10/13/2019 at 3:31 AM, D.B. Andrus said: Anyone else find the 7 piece cowling a pain when you want a closed engine? What about a one piece cowling? Interested or no? Cheers, D.B. Id be in for several...ie 3 or 4 Link to comment Share on other sites More sharing options...
Mikester Posted October 18, 2019 Share Posted October 18, 2019 Has anyone tried simplifying the Revell build? I was considering trying to build up the whole cowling assembly and then cutting a round piece of styrene to mount the engine to and insert it. In essence this would be very similar to the Hasegawa design of an engine plug. Link to comment Share on other sites More sharing options...
chrish Posted October 19, 2019 Share Posted October 19, 2019 Not much of the engine can be seen behind the front ring and cooling fan so that would likely be fine wouldn’t it? LSP_K2 1 Link to comment Share on other sites More sharing options...
Lothar Posted October 19, 2019 Share Posted October 19, 2019 You'll run into a fit problem if you try to place the cowling over the engine, you need to sand down the engine "rocker covers?" or thin the inside of the cowling to get a good fit. I think Revell's original idea was to display the engine open. As chrish said, once the cooling fan is installed there's almost nothing to see inside. So I think the Hasegawa solution makes more sense and saves you some headache. Lothar Link to comment Share on other sites More sharing options...
Mikester Posted October 19, 2019 Share Posted October 19, 2019 4 hours ago, Lothar said: You'll run into a fit problem if you try to place the cowling over the engine, you need to sand down the engine "rocker covers?" or thin the inside of the cowling to get a good fit. I think Revell's original idea was to display the engine open. As chrish said, once the cooling fan is installed there's almost nothing to see inside. So I think the Hasegawa solution makes more sense and saves you some headache. Lothar I've got five Revell F-8s and two A-8/R2s in the stash so I need to come up with a solution. May just make a resin copy of the Hasegawa engine plug and see how well that works. I'll post it if I come up with something that works. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now