Dave Roof Posted August 19, 2023 Share Posted August 19, 2023 (edited) These two sheets are going to Microscale this week. A second, and smaller insert for FL32008 is being finalized and will be sent to Cartograf to print. This insert will include markings for the landing gear, ejection seat, missile launchers and data placards for the fuel tanks. Airframe data markings are based on personal photos and measurements, as well as drawings and information contained in A1-F-18AC-SRM-500, Aircraft Corrosion Control Manual for the F/A-18 Hornet. Edited September 18, 2023 by Dave Roof Hrvoje, AnthonyWan, LSP_Ray and 10 others 13 Link to comment Share on other sites More sharing options...
Dave Roof Posted August 25, 2023 Author Share Posted August 25, 2023 Our second AH-1Z sheet will be sent to Microscale at the end of September. We are currently waiting for reference photos on the Czech Republic AH-1Z, which should arrive early next month. Sheet is 8.5 x 11 inches. AH-1Z BuNo 169498, the tri-color scheme, is covered as it appeared with three different squadrons. HMLA-269, who originally painted it, HMLA-169 and HMLA-267. The latter being the current operators. Changes in the markings, camouflage pattern and airframe will be noted for each time period it was flown by each squadron. LSP_K2, thierry laurent, RNoAF and 3 others 6 Link to comment Share on other sites More sharing options...
RNoAF Posted August 26, 2023 Share Posted August 26, 2023 WOW!! I want the AH-1Z sheet!!! Link to comment Share on other sites More sharing options...
scott_t Posted August 26, 2023 Share Posted August 26, 2023 Looking forward to the 32nd sheets ! Especially the ATARS markings ! Link to comment Share on other sites More sharing options...
RNoAF Posted August 26, 2023 Share Posted August 26, 2023 I think i need the F/A-18 sheet and conversion kit too. Link to comment Share on other sites More sharing options...
Dave Roof Posted September 18, 2023 Author Share Posted September 18, 2023 If I move forward, this will most definitely be a pre-order item. If it is successful (for me personally, recovering the print cost is a successful sheet), I have a maintenance data sheet almost done that would also go to print as FL18002. I'd also consider FL18003 with two different options if both of these sheets are successful. Both would retail for $20 each What say you? Isar 30/07, themongoose, LSP_Kevin and 3 others 6 Link to comment Share on other sites More sharing options...
RNoAF Posted September 19, 2023 Share Posted September 19, 2023 Im in for the 1/18 sheet. Both of them!!!!! Link to comment Share on other sites More sharing options...
RNoAF Posted September 19, 2023 Share Posted September 19, 2023 Correction!! All three of them! Link to comment Share on other sites More sharing options...
red Dog Posted September 19, 2023 Share Posted September 19, 2023 funny, I have been eying the 1/18 harrier and considering what's available as aftermarket. This might be the spark to convince me... I'm not there yet but it's coming I guess Link to comment Share on other sites More sharing options...
SwissFighters Posted September 19, 2023 Share Posted September 19, 2023 Dave, I will definitely order FL32008 plus insert when ready. Btw, the missile launcher, pylons and HUD I ordered are fantastic. I couldn't be happier with the print quality and detailing. Thanks Tony Link to comment Share on other sites More sharing options...
Dave Roof Posted September 19, 2023 Author Share Posted September 19, 2023 Pre-Order link is hot: https://www.flyingleathernecksdecals.com/p/fl18001-big-scale-harriers-for-hobbyboss Greg W and RNoAF 2 Link to comment Share on other sites More sharing options...
RNoAF Posted September 19, 2023 Share Posted September 19, 2023 (edited) Ordered!! When is this available? https://www.flyingleathernecksdecals.com/p/fl18-1008-av-8b-weapons-pylons-for-hobbyboss I preordered it a while back. Edited September 20, 2023 by RNoAF Pete Fleischmann 1 Link to comment Share on other sites More sharing options...
RNoAF Posted January 24 Share Posted January 24 (edited) Hi Dave. Whats the status on the 1/18 Harrier decals? Edited January 24 by RNoAF Pete Fleischmann 1 Link to comment Share on other sites More sharing options...
RNoAF Posted March 6 Share Posted March 6 Bump!! Pete Fleischmann 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now