ade rowlands Posted December 6, 2021 Share Posted December 6, 2021 (edited) It’s a kit I’ve looked at and almost bought a few times now and as supplies are dwindling after the companies demise I’m guessing now is the time to act. But my question is, if I elect to build it all panels closed as is my preference for all builds, how does it build up? Is it one of those kits that’s designed to be all opened up and will throw nothing but problems and poor fit if I go the all panels closed route? I’d like to do it as a VVS Bird. Should also add that I am not bothered about the short fuselage and wouldn’t be adding a plug. Edited December 6, 2021 by ade rowlands LSP_K2 1 Link to comment Share on other sites More sharing options...
MikeC Posted December 6, 2021 Share Posted December 6, 2021 (edited) It fits fine closed up. As you're planning to do a Soviet aircraft you won't need to remove the Soviet-specific df fairing underneath. If doing a Q you'll need to filll the panels for the wing guns. But on the whole it's a good kit, although some are dubious about the length. Edited December 6, 2021 by MikeC LSP_K2 1 Link to comment Share on other sites More sharing options...
ade rowlands Posted December 6, 2021 Author Share Posted December 6, 2021 37 minutes ago, MikeC said: It fits fine closed up. As you're planning to do a Soviet aircraft you won't need to remove the Soviet-specific df fairing underneath. If doing a Q you'll need to filll the panels for the wing guns. But on the whole it's a good kit, although some are dubious about the length. Cheers Mike. Link to comment Share on other sites More sharing options...
MikeC Posted December 6, 2021 Share Posted December 6, 2021 (edited) My pleasure. It's a while since I did mine, but here's my tip for nose weight, using the stick-backed ballast that our flying model brethren use. Chop the bottoms (the non-visible) parts off the oxygen bottles and pop it in there. Edited December 6, 2021 by MikeC As ever, correction of a typo: I really must get a keyboard that can spell! npb748r, coogrfan, Rick Griewski and 3 others 3 3 Link to comment Share on other sites More sharing options...
ade rowlands Posted December 6, 2021 Author Share Posted December 6, 2021 6 minutes ago, MikeC said: My pleasure. It's a while since I did mine, but here's my tip for nose weight, using the stick-backed ballast that our flying model brethren use. Chop the bottoms (the non-visible) parts off the oxygen bottles and pop it in there. If I go ahead and buy the kit I’m planning on not using anything I don’t need to from the gun bay so was already looking at where I could stash some Liquid Gravity. But all pointers and tips welcome. Want some variety in my stash. LSP_K2 and MikeC 2 Link to comment Share on other sites More sharing options...
Night Hog Posted December 6, 2021 Share Posted December 6, 2021 Panel fit is excellent. Buttoned up build is best option (IMHO) HB252, LSP_K2, Kagemusha and 1 other 4 Link to comment Share on other sites More sharing options...
MikeC Posted December 6, 2021 Share Posted December 6, 2021 1 hour ago, ade rowlands said: I’m planning on not using anything I don’t need to from the gun bay A man after my own heart; it's a few years, but I seem to recall that there was a certain minimum that needed to go in. I built up the gun bay interior as it was a magazine build for SAMI; it appeared in the June 2016 issue according to my records. Kagemusha 1 Link to comment Share on other sites More sharing options...
ade rowlands Posted December 6, 2021 Author Share Posted December 6, 2021 (edited) Kit purchased. Now to find some decals. Typically it seems I am late to the party and all that’s available is AML Decals. Have never used them so don’t know anything about their quality. Zotz Soviet Aces looks interesting but no longer available. Might need to track down a reference book on the Soviet Airacobras also. Seems they made changes, omitted guns and whatnot. Edited December 6, 2021 by ade rowlands LSP_K2 1 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted December 6, 2021 Share Posted December 6, 2021 I didn't quite have the same luck that the other fellas had with this kit: It turned out OK in the end, though: I'd actually consider building another one, I but I do have a Special Hobby example in the stash to get to first. I'm hopeful that someone will eventually re-introduce the Kitty Hawk kit into the market. Kev MikeC, daveculp, D Bellis and 1 other 4 Link to comment Share on other sites More sharing options...
LSP_Ray Posted December 6, 2021 Share Posted December 6, 2021 2 hours ago, ade rowlands said: Kit purchased. Now to find some decals. Typically it seems I am late to the party and all that’s available is AML Decals. Have never used them so don’t know anything about their quality. Zotz Soviet Aces looks interesting but no longer available. Might need to track down a reference book on the Soviet Airacobras also. Seems they made changes, omitted guns and whatnot. What kind of markings are you looking for? I have some in the stash; don't need all the options. Kagemusha and LSP_K2 2 Link to comment Share on other sites More sharing options...
ade rowlands Posted December 7, 2021 Author Share Posted December 7, 2021 9 hours ago, LSP_Ray said: What kind of markings are you looking for? I have some in the stash; don't need all the options. From what I've read and from what I've seen from owning the Mirage kits, Kitty Hawk Decals are less than stellar. I want to do a Soviet machine. It doesn't need to be a scheme of any of the Aces, though Kill marks are a plus. I'm not sure if these things carried any stencil data at all. I can get AML Decals from Hannants but their quality is an unknown to me. Link to comment Share on other sites More sharing options...
LSP_Ray Posted December 7, 2021 Share Posted December 7, 2021 Just now, ade rowlands said: From what I've read and from what I've seen from owning the Mirage kits, Kitty Hawk Decals are less than stellar. I want to do a Soviet machine. It doesn't need to be a scheme of any of the Aces, though Kill marks are a plus. I'm not sure if these things carried any stencil data at all. I can get AML Decals from Hannants but their quality is an unknown to me. I have at least two AM decal sets. I will see what I got for Russki’s. One I have is the Zotz set. Link to comment Share on other sites More sharing options...
ade rowlands Posted December 7, 2021 Author Share Posted December 7, 2021 3 minutes ago, LSP_Ray said: I have at least two AM decal sets. I will see what I got for Russki’s. One I have is the Zotz set. Thanks, theres no rush, the kit will be on the slow boat from China and it will be going in somewhere in the middle of the build pile when it arrives, which at my pace of building still puts it a little way off being attempted. Hopefully in that delay Quinta or Yahu will knock out a set for it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now