thierry laurent Posted April 11, 2019 Share Posted April 11, 2019 9 hours ago, Rick Griewski said: A Tigger Models Tigercat vac kit arrived Monday. Not everyones cup of tea I realize. So many may not be jealous. Tuesday I cut the parts out. IIRC this was a new tool kit. All the parts line up very well and are beaming with accurate shapes. So far I have engines and props and blue paint. Now the quest for wheels, landing gear struts and cockpit essentials. Note that I started the Combative Models kit years ago and it wore me down quite frankly speaking. Not worth the remaining effort. It will end up as my paint mule. I have to practice gloss paint finish. Big if... I can resolve the parts I need then I may enter into the multi-engine group build. The Anson is poised but... We shall see. Rick You are brave! You should contact Harold as I think he released such wheels. LSP_K2 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted April 11, 2019 Share Posted April 11, 2019 15 hours ago, Rick Griewski said: A Tigger Models Tigercat vac kit arrived Monday. Not everyones cup of tea I realize. So many may not be jealous. Tuesday I cut the parts out. IIRC this was a new tool kit. All the parts line up very well and are beaming with accurate shapes. So far I have engines and props and blue paint. Now the quest for wheels, landing gear struts and cockpit essentials. Note that I started the Combative Models kit years ago and it wore me down quite frankly speaking. Not worth the remaining effort. It will end up as my paint mule. I have to practice gloss paint finish. Big if... I can resolve the parts I need then I may enter into the multi-engine group build. The Anson is poised but... We shall see. Rick 5 hours ago, thierry laurent said: You are brave! You should contact Harold as I think he released such wheels. Indeed he does. Very nice too! He may even have a couple more things..... Link to comment Share on other sites More sharing options...
thierry laurent Posted April 11, 2019 Share Posted April 11, 2019 17 hours ago, Rick Griewski said: A Tigger Models Tigercat vac kit arrived Monday. Not everyones cup of tea I realize. So many may not be jealous. Tuesday I cut the parts out. IIRC this was a new tool kit. All the parts line up very well and are beaming with accurate shapes. So far I have engines and props and blue paint. Now the quest for wheels, landing gear struts and cockpit essentials. Note that I started the Combative Models kit years ago and it wore me down quite frankly speaking. Not worth the remaining effort. It will end up as my paint mule. I have to practice gloss paint finish. Big if... I can resolve the parts I need then I may enter into the multi-engine group build. The Anson is poised but... We shall see. Rick I have one question for you: does the kit have a correct nighfighter rear canopy? I'm really interested to know it as I've always wanted to have THAT version whereas the Hph kit only gives the fighter/photo version. I have the Combat kit in a closet and unfortunately, the canopy is useless. I already had a look at John's blog but unfortunately there is no picture of the Tigercat kit parts. Out2gtcha 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted April 11, 2019 Share Posted April 11, 2019 I have both of the aforementioned kits (Combative and HpH). My CM kit is horrible. It looks like someone threw some sand on the master before pulling it. Id be interested in the Tigger models kit too, to see what parts it came with. The CM kit does come with the -N nose too but the shapes, including the standard fighter nose are in question IMHO. scvrobeson 1 Link to comment Share on other sites More sharing options...
Rick Griewski Posted April 11, 2019 Share Posted April 11, 2019 1 hour ago, thierry laurent said: I have one question for you: does the kit have a correct nighfighter rear canopy? I'm really interested to know it as I've always wanted to have THAT version whereas the Hph kit only gives the fighter/photo version. I have the Combat kit in a closet and unfortunately, the canopy is useless. I already had a look at John's blog but unfortunately there is no picture of the Tigercat kit parts. Thierry, The kit comes with two copies of both canopies. They look nice. However I am no expert on the aircraft... Yet. I will not build the night fighter anyway. My eye is on the drone controller (similar shape to night fighter?) IIRC that variant recycled the Bearcat windscreen and canopy or something similar enough for me. Rick Out2gtcha 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted April 11, 2019 Share Posted April 11, 2019 Coool. I might have to order a vac Tigercat from Tigger for my (someday) Reno what-if racer I have planned. I already have the Fisher high pressure spinners and props, as well a nice pilot and some pit stuff. I just need a nice vac copy of the kit and transparencies vs the complete junk vac I have now. Link to comment Share on other sites More sharing options...
Rick Griewski Posted April 11, 2019 Share Posted April 11, 2019 (edited) On April 11, 2019 at 9:42 AM, Out2gtcha said: I have both of the aforementioned kits (Combative and HpH). My CM kit is horrible. It looks like someone threw some sand on the master before pulling it. Id be interested in the Tigger models kit too, to see what parts it came with. The CM kit does come with the -N nose too but the shapes, including the standard fighter nose are in question IMHO. The CM Tigercat kits floating around that were made by the original owner have a reputation for very poor quality (e.g., grit, painfully thin plastic, incomplete pull, opaque canopies, damaged patterns). My CM Tigercat kit has fuselage and wing parts that do not match up. Note that the new owner does a fine job and is great to work with. Many of the patterns however are old school and not accurate. The Tigger Models kit has the fighter nose, tall tail and backseat canopy. I have not assessed the accuracy in any level of detail. As I told Thierry, I am not and expert at all (and I do not obsess about much in life except honesty and people keeping to their word). The kit is formed using the proper plastic thickness so there is enough material to support various corrections/methods. Rick Edited April 13, 2019 by Rick Griewski Clarified parts of CM kit that do not match up. Out2gtcha 1 Link to comment Share on other sites More sharing options...
thierry laurent Posted April 11, 2019 Share Posted April 11, 2019 Thanks Rick. The nightfighter rear canopy had a bulge in front of its rear edge (to make room for the head of the radar operator). My question was related to the presence or absence of that bulge. Out2gtcha 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted April 11, 2019 Share Posted April 11, 2019 Finally got the last piece of the puzzle.................... For my next build on deck.................. scvrobeson, Fvdm, Smokey and 2 others 5 Link to comment Share on other sites More sharing options...
Rick Griewski Posted April 11, 2019 Share Posted April 11, 2019 2 hours ago, thierry laurent said: Thanks Rick. The nightfighter rear canopy had a bulge in front of its rear edge (to make room for the head of the radar operator). My question was related to the presence or absence of that bulge. Not much that I can see. Looking at photos it seems very small though. Rick thierry laurent and Out2gtcha 2 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted April 11, 2019 Share Posted April 11, 2019 The Tigger Tigercat kit is actually a relatively recent one, being mastered by Paul Smith (a member here) only 3-4 years ago, just as the HpH kit was being announced. Kev Rick Griewski and Out2gtcha 1 1 Link to comment Share on other sites More sharing options...
Neo Posted April 12, 2019 Share Posted April 12, 2019 4 hours ago, Out2gtcha said: Finally got the last piece of the puzzle.................... For my next build on deck.................. Thats so cool. Where and how much? Out2gtcha 1 Link to comment Share on other sites More sharing options...
aircare84 Posted April 12, 2019 Share Posted April 12, 2019 Just got this yesterday. Been interested since I first heard of it coming out. Also had in the box; 2x 1/16 Gaspatch Spandau's, 1/16 Gaspatch turnbuckles and a wood grain painting templete. Got all for just over 1/3 of retail. A all new kit, not a re box of the Model Airways kit. Out2gtcha, coogrfan, BiggTim and 1 other 4 Link to comment Share on other sites More sharing options...
Out2gtcha Posted April 12, 2019 Share Posted April 12, 2019 1 hour ago, Neo said: Thats so cool. Where and how much? He Neo, It's from a place called Magic Scale Modeling They have all sorts of light kits for all sorts of models. My kit was about $80 or so not including shipping from Belgium, as well as 5 extra Euros for the second pit in my TF-104. Neo 1 Link to comment Share on other sites More sharing options...
thierry laurent Posted April 12, 2019 Share Posted April 12, 2019 2 hours ago, Out2gtcha said: He Neo, It's from a place called Magic Scale Modeling They have all sorts of light kits for all sorts of models. My kit was about $80 or so not including shipping from Belgium, as well as 5 extra Euros for the second pit in my TF-104. BTW, this guy is also collaborating with companies such as Revell to release the special editions such as their last Ju88. Out2gtcha 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now