Wurzacher Posted December 24, 2016 Share Posted December 24, 2016 (edited) Didn´t want to let this year end without showing you one of the models I finished 2016. But first I want to thank LSP mate Nick Karatzides for this kit and his tremendous work designing it! This is my first completely 3D printed kit, so it did not went without some hassle. Nick´s research and the design are shown here on LSP: http://forum.largescaleplanes.com/index.php?showtopic=51976&hl=flettner Most of my trouble was based on the 3D printing. My kit was printed by Shapeways in the Netherlands, for I am from Europe. Nick suggested to clean the parts in white spirit only. But this did not work for me. The parts got stained after giving them a bath in white spirit, well seen here: So, I filed a complaint at Shapeways, strongly supported by Nick. Shapeways agreed to completely re-print the kit. Great customer care for a kit that costs some bucks!Getting the second print I thought about how to clean them. I placed some not this visible parts in my ultra-sonic cleaner, filled with destilled (!) water and some dishwashing detergent. Well, this went wrong, too... Also, my ultra-sonic cleaner broke down after some runs, it started to smell charred. So I ordered a new one, which ment even more expense. But well... In the end I cleaned all parts in destilled water only. Only water, no other stuff. Despite the kit parts having been cleaned from the supporting wax at Shapeways the parts still had lots of the wax on them,clearly shown by the water getting cloudy after some seconds. Don´t ask me how many litres of destilled water it took to clean all the parts!Nick designed all parts to a very tight fit. So I took outmost care to mask all locating pins and holes before giving the parts a coat of gloss black acrylic primer. Any paint on these points will make the parts impossible to fit! I guess it was from MiG, but I didn´t make notes on this. The main fuselage got a airbrushed in Alclad Duraluminium, to be followed by accents of Alclad Airframe Aluminium. Masking the rear part for airbrushing in a wooden base coat was intricate, for the part has this many details and is easily broken. Nick provides a template for the instruments, to be glued behind the part with the bezels on. But this template showed US instruments! So I checked my literature for pictures of the IP of the real Flettner. I then searched the Net for colour pictures of the needed instruments, resized and worked them in Photoshop. Also in Photoshop I placed and sized them onto a scan of the template and printed them on glossy photo paper on my colour printer. Much better! All in all this was a very enjoyable build and it looks great in my cabinet. Hope you like it as well!Here the pics: Edited November 27, 2017 by Wurzacher X15, williamj, TorbenD and 14 others 17 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher Loach Driver, red baron, Pfuf and 11 others 14 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher X15, 109, sandokan and 11 others 14 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher Jan_G, Lars Befring, red baron and 8 others 11 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher tucohoward, sandokan, Lars Befring and 5 others 8 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher Lars Befring, Chris Wimmer, Zero77 and 6 others 9 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher KiwiZac, Lars Befring, Shaka HI and 5 others 8 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher tucohoward, KiwiZac, sandokan and 4 others 7 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher Chris Wimmer, Shaka HI, tucohoward and 5 others 8 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher Chris Wimmer, Lars Befring, X15 and 6 others 9 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Edited November 27, 2017 by Wurzacher Chris Wimmer, sandokan, Zero77 and 3 others 6 Link to comment Share on other sites More sharing options...
109 Posted December 24, 2016 Share Posted December 24, 2016 Wonderful! ! And a Merry Christmas to you and your family! Wurzacher 1 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 (edited) Thanks for watching! And happy Christmas to all! Edited November 27, 2017 by Wurzacher D Bellis, sandokan, Loach Driver and 4 others 7 Link to comment Share on other sites More sharing options...
Wurzacher Posted December 24, 2016 Author Share Posted December 24, 2016 Wonderful! ! And a Merry Christmas to you and your family! Danke, Bernd! Dir auch!! 109 1 Link to comment Share on other sites More sharing options...
Guest Posted December 24, 2016 Share Posted December 24, 2016 (edited) Thomas thanks so much for the detailed pics and instructions. I love this jem. Would love to have one. I have talked to Nick about it. He is a wonderful person. Merry Christmas to you.....Harv Edited December 24, 2016 by Guest Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now