Jump to content

Wurzacher

LSP_Members
  • Posts

    1,407
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Wurzacher

  1. The Leopard family of tanks make use of „active“ tracks. So, there should be no sag when standing level. Maybe you could adjust the idler wheel? There is some stunning fine detail to be seen on the hubs and other parts. Following!
  2. Just got an email confirming the bad news. No more orders are taken…. ☹️
  3. I always fall in love with a Sea Fury in sight! Applause to Paul Fisher for his impressive kit! And, a well deserved 👏👍 for your lovely build! Excellent!
  4. First of all: applause for your beautiful work here! “Stuvi“ is an abbreviation for „Sturzvisier“, dive visor. The „Sturzflug-Automatik“ is an automated process, that recovers the aircraft out of a dive, engaged by the pilot, in case he blacks out when pulling up again.
  5. I got such a spray booth, and won’t miss it. It is wider as many standard booths, and the hose to get the fumes out attaches to the top side of the booth, providing more space at the back. I run mine on distilled water only. I place some paper tissue on the bottom of the spray area, easy to replace and catch water droplets. Check water level before using! If water level is too low, you could get air bubbles on the waterfall, and uneven coverage of it. The extraction fan is powerful, but as to no surprise, some fumes might get out at you, depending on how deep in the booth you paint and how much paint you apply. But, it is much better than other simple booths! I always work without a respirator mask now. Yes, I may smell some stuff here and there, but most gets blown out. I use cleaners from Modeller’s World. Amazing stuff, with one of them being very powerful (and having a nasty smell). Working with acrylics and lacquer paints is much more comfortable for me now having this waterfall spray booth.
  6. Thank you all very much for your amazingly helpful replies! Indeed I got a reply from Ms Semberova, from the same email address which bounced back to me! Weird… I am now making my mind on a possible order. 👨‍💻
  7. Had several orders with Artscale. Will contact them. Thank you so much! My worries are: in case of defective parts, etc., how to get in contact with HPH?
  8. My email to shop@hphmodels.cz just bounced back, no delivery possible...
  9. Have this one, too. A nice book of the past, with no internet.
  10. Stefano, grazie!!! Email sent!
  11. Bekim, du bist ein Gott! I guess nothing and noone beats your talent in 3D design! 👋
  12. I got their 1/32 Junkers Ju 388 conversion set. The detail is ok-ish, the vac canopy looks transparent. Only, the printing process is not up to what is possible today. Miles away what the likes as AFV Modeller and others produce. I am looking for a way to reduce, or even get rid, of the very visible striation marks. The little communication I had was nowhere is rude as what the OP posted. A shame!
  13. Hi all, I wonder if anybody has a "working" way to get in contact to them. I once did email the address given on the website, and it bounced back... Also, logging into their website, my Bit Defender Antivirus gets nuts because of suspicious links on the website. Makes me worry. So, anybody with a working email address? I need some information before possibly buying a pricey kit. Thanks a lot! Thomas
  14. Email addy works for me, too.
  15. Looks like the trailer of a Scheuch-Schlepper to me. You know, the device to tow a landed Me 163 back to base.
  16. Many thanks to John and Kevin! This is the most detailed and perfectly presented tomb regarding the Ju 88! I am pleased to find pictures of Guttorm in there! My guess is, it might take me weeks to go through this masterpiece. iPad battery is charged! 🙂 Thank you so much for this oeuvre! My hope is for John to get better, sorry to read about his health struggle. Best wished are sent out to Hungary! Maybe, who knows, some of his 1/32 conversions sets might appear again.
  17. Yepp! Saw those on Nigel´s Modelling Bench and ordered 4 pieces at Rebell.com. No problems at all.
  18. As it’s a build by John Kim, a true master in my eyes, I wasted no time to buy it. Now, a cup of coffee and some sweets, then the pleasure to see his work! Thanks for publishing this one, Kev!
  19. Got my D400 sander from Troy, and was amazed to find that it’s to be powered by a cord. Don’t know where I got the bug it would be cordless… Made the first sanding sessions on ejector pins filled with black superglue. Results are very satisfying so far. I only wished for a very small sanding head. The order process and the communication with Troy went perfectly! Don’t hesitate to buy from this fine chap! I am a happy customer!
  20. This is a message on Britmodeller dated December 30, 2022… But, hey, there still is hope!
  21. Another work by John? Consider this one as bought!
  22. Had the pleasure to meet Bekim today at the Leipheim / Germany model show. An extremely nice and talented chap! And his 3D model here is pure art! I got almost speechless seeing this amazing model!
  23. Got those beautiful legs and seamless Vulcan intakes yesterday. Wonderful stuff, and VERY strong! Now I’m thinking about how to remove the casting stubs from the LG parts… I am a happy customer!
  24. Some nice work here! Will check for sure when doing mine!
×
×
  • Create New...