Vitali Posted May 9, 2014 Share Posted May 9, 2014 Would there be any possibility that you could make your canopy master available so some of us could get a copy of it? I would really like to do the F-100F as would some others here would and as you have shown it's possible with two kits. I like very much what you have completed so far and look forward to seeing more. LSP_Paul 1 Link to comment Share on other sites More sharing options...
Barry Posted May 10, 2014 Author Share Posted May 10, 2014 There have been several LSP folks ask the same question. When I get to that point I am not opposed to making them available. The cost will be up to the individual that will be doing them for me. Barry Girlscanplay2 and LSP_Paul 2 Link to comment Share on other sites More sharing options...
Vitali Posted May 11, 2014 Share Posted May 11, 2014 Thanks Barry, much appreciated. Really looking forward to seeing your F-100D progress. Link to comment Share on other sites More sharing options...
Barry Posted May 11, 2014 Author Share Posted May 11, 2014 (edited) On 5/8/2014 at 11:18 PM, Magic Mike said: Is there a build thread somewhere showing how you did the fuselage and such?. Looking at the pics here it lookalike a simple process... MM Mike, Here are some photos that show where the cuts were made. Hope these will be helpful. Edited November 13, 2019 by Barry Girlscanplay2 and Derek B 2 Link to comment Share on other sites More sharing options...
Vitali Posted May 11, 2014 Share Posted May 11, 2014 Excellent Tutorial thanks! Link to comment Share on other sites More sharing options...
LSP_K2 Posted May 12, 2014 Share Posted May 12, 2014 Looking very spiffy. Link to comment Share on other sites More sharing options...
blackbetty Posted May 12, 2014 Share Posted May 12, 2014 very nice. i always wanted an early weasel with a single shrike. if you make it availible, will you do a fuselage plug? Link to comment Share on other sites More sharing options...
Barry Posted May 18, 2014 Author Share Posted May 18, 2014 (edited) I had not considered any type of commercial conversion kit. I will be lucky to finish it in time to make the cut. Barry Edited May 18, 2014 by Barry LSP_Paul 1 Link to comment Share on other sites More sharing options...
Barry Posted May 18, 2014 Author Share Posted May 18, 2014 Along with the lengthening of the fuselage came the intake trunking and new bulkheads. In all fairness these pictures are of work previously accomplished but I'm getting closer to "new" work on the build. Barry Girlscanplay2, Derek B and Harold 3 Link to comment Share on other sites More sharing options...
Vitali Posted May 18, 2014 Share Posted May 18, 2014 Hi Barry, thanks for the reference photos they will help in performing the surgery. Can't wait to see more of this build. I love the F-100F. Link to comment Share on other sites More sharing options...
Guest Peterpools Posted May 18, 2014 Share Posted May 18, 2014 barry Regardless of when, amazing work Keep 'em coming Peter Link to comment Share on other sites More sharing options...
marauderdriver Posted May 24, 2014 Share Posted May 24, 2014 Hey Barry, I love this build that your doing here and you know Georgia ain't that far for me and I have a cattle prod Seriously, I do love the conversion watch'in you jack Link to comment Share on other sites More sharing options...
Martinnfb Posted May 24, 2014 Share Posted May 24, 2014 I really like unusual builds like this one, way to go Barry! Cheers M. Link to comment Share on other sites More sharing options...
Barry Posted May 24, 2014 Author Share Posted May 24, 2014 (edited) Thanks guys and Gals for your words of encouragement. I have been working on the wings and dealing with the usual Trumpeter "steps and gaps" problems with the "moveable" control surfaces. You would think that at least the fit would be consistent from one wing to the other; but no! There are also numerous sink marks especially on the upper surface of the Slats. Lots of fitting, trimming, shimming and sanding. I have however made progress and will post some photos tomorrow, I hope! TAFN, Barry Edited May 25, 2014 by Barry Girlscanplay2, Harold and LSP_Paul 3 Link to comment Share on other sites More sharing options...
Barry Posted May 25, 2014 Author Share Posted May 25, 2014 As promised here are some photos and thoughts on the wings. My build will be in-flight with the aircraft posed at a 90 degree roll to the left with slats deployed and control surfaces correctly position. TAFN, Barry Harold and LSP_Paul 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now