Jump to content

Zactoman

LSP_Members
  • Content Count

    134
  • Joined

  • Days Won

    2

Everything posted by Zactoman

  1. I uploaded the following paint charts in 1/48 (@150 dpi): Links to the drawings are here: https://zactomodels.com/html/Su-33/Su-33_deal.htm (also note that I've reduced the price to $47 on the Kinetic Su-33 kits I'm selling! Best price you'll find anywhere!) I spent a lot of time researching the camo schemes and documented them to the best of my ability. It frustrates me when I see kits that include multiple decal options but only show one camo scheme, especially on a plane where there is so much variation. There are also a bunch of small details that differ from one plane to another. Little details like the thin gray edge stripe under the cockpit is different on each of these schemes. Details like the gray forward section on the Bort 80 IRST. The bare metal tips on Bort 68s wingtip pylons. Etc. Also note the bare metal panel on the lower left fuselage just below the wing flap. I think I've only seen one build that included this. Note that I don't call out color recommendations on the charts or my web page. I've seen a lot of discussion and debate about which paint brands are most accurate and haven't seen a definitive answer. If I were building one I'd grab something close and make my own color adjustments. The main marking locations should be close. The markings were based on the decals that were being developed for the 1/48 kit before Kinetic took over and finished the project. The markings on the drawings are not necessarily accurate (especially the colors). Cross Delta ended up doing the decals for the Kinetic kit and I don't know how accurate they are either. I recommend Begemot Decals. They offer a sheet with early schemes (48-007 which includes Bort 80 above) as well as one for current schemes (48-051 Su-33 in Syria) which could be used to do the other schemes above. The stencils and stencil location on these drawings is questionable (wasn't carefully researched), so check your references. Again, I'd recommend Begemot. They have an Su-27 stencil package (48-009) that includes decals and instructions for the Su-33. It includes 3 pages of stencils for airframes, pylons and weapons. Hope that you like the drawings and find them helpful on your builds. If you don't have the kit yet, grab one at this price while they last (prices will likely be going up a lot in the near future...).
  2. The fins are very thin and knife edged (just like the real deal). Don't make the mistake of leaving your assembled missiles sitting on thier fins or the tips will evetually bend and warp (especially true on the pontiy tipped fins of the A/B version)! Instead support your finished missiles with the fins elevated until you are ready to mount them to your model. Parts are designed to make removing the fins from the casting blocks an easy task. The rear fins require that you first clip the mounting post sprue. Then a light score with an X-acto and rock them back and forth. A quick clean-up of the mating surface with a fine file or sandpaper and you're ready to go. Mounting brackets will need to be adjusted to fit the pylons you are mounting them on. I'm surprised at how far off some of the kit provided pylons are. AFAIK there aren't any accurate ones out there yet. Packaging is designed to reduce the chance of fin warpage. If you do encouter warps, a quick dip in hot water or blast with a hairdryer will allow you to straighten them. Decals are not included but Two-Bobs decals offer a set in case the kit you are using these on does not provide decals. http://www.twobobs.net/contents/en-us/p319.html For those that missed it, during development I was posting some pics on ARC with comparison pics to other offerings: http://www.arcforums.com/forums/air/index.php?/topic/306361-132-aim-120/ I'd invite you to add pics of the other brands of AMRAAMs there as well. I'm most curious to see the new releases from Eduard and the missiles included in the new Revell F-18E kit.
  3. Now available! https://zactomodels.com/ First, a big thanks to Jim Rotramel for helping with references! Two versions are available, the early AIM-120A/B versions and the newer clipped wing AIM-120C. Both versions include separate nosecones and exhaust section to convert your missiles to CATM versions (Captive Air Training Missile). The main body as supplied has the live version of the nosecone molded-in and just the exhaust cone as a separate part. The CATM versions do require cutting and replacing the front and rear sections. The CATM type nosecone is occasionally seen on live missiles so check your references. Note the left wing AIM-120C in this pic has the CATM type nose while the right AIM-120A/B is the standard live nose: https://www.airfighters.com/photo/99576/M/USA-Air-Force/General-Dynamics-F-16C-Fighting-Falcon/89-2029/ I still don't know the explanation for that so if any of you know please chime in.
  4. What an unfortunate piece of... "Engineering" shall we call it. Sad that the Revell I grew up on, that was showing continuous signs of improvement, dropped the ball so badly. Keep up the good work. It almost looks like a fun challenge (if you have masochistic tendencies ). Is that the kit AMRAAM? It looked more detailed in the instruction sheet. I ask because I am about ready to release an aftermarket version ( http://www.arcforums.com/forums/air/index.php?/topic/306361-132-aim-120/ ) and want comparisons to existing parts.
  5. It's not dead, just shelved after reality set in. Zactomodels (14 years) has been my full-time job for the last 12 years and aftermarket doesn't pay much. In order to keep food on the table it became necessary to make smaller products with shorter production times. A new release equals a sudden income flow. Those times between releases can be devastating. Next new product (coming soon): http://www.arcforums.com/forums/air/index.php?/topic/306361-132-aim-120/ In order to finish my YF-23 I'd probably need close to a year at the workbench (while maintaining the business, casting parts and filling orders of existing product). There is definitely still interest in the project (I still get e-mails asking about it) and I have everything I need to finish it. I just need to keep a steady flow of new products and orders going and not get interrupted again (working with crooked model companies that break their promises). When the time comes I'll remove the ever thickening layer of dust on this beauty and finish her off. In-progress here: http://www.arcforums.com/forums/air/index.php?/topic/89934-132-yf-23-black-widow-ii/
  6. EDIT: Paul already got the info! Just spotted this on Twitter. If anybody here ( @Jennings Heilig ) has the ability to contact Paul, please let him know about this. https://twitter.com/KittyfromVA/status/1061127865415163904 In case the pic doesn't show: MissKitty2‏ @KittyfromVA "At the church of nararene in Oroville. She is all alone with her dog. She has a bed and will be here for the entire night." "Helen Fisher is needing help locate her son Paul Fisher to inform him that she is at the Oro Naz. She does not have a phone, Please share!"
  7. I was at the show and had hoped to crash the meet'n'greet but got distracted by official business. Bummer! I was looking forward to finally meeting so many of you. Looking at the faces in the pictures I realize that I wandered right by several of you! Next time...
  8. Thanks for the nice feedback guys! Regarding my MiG-29 goodies: I just adjusted the pricing (lowered!!! ) on the BIG Combo with all Archer or all Aphid load-outs. I apparently screwed up and forgot to include the discount when I created the web page so was asking full price.
  9. Beautiful stuff Oliver. Mad paint skillz! Z-a-c-t-o-m-a-n (real name Chris, not Zach). I don't know if the packages are marked, I'd doubt it. I have MV custom make the lenses for my AIM-9X missiles, otherwise I wouldn't have known this. Depending on where you buy them, you might ask when they received the stock. If it's less than a year then they are likely the new ones.
  10. MV is now using UV resistant epoxy for their lenses that is not supposed to yellow over time. They started this at least a year ago.
  11. If you're trying to tempt me into doing intakes it won't work! I have too much on my plate already...Thanks for posting the awesome pic though! I wish I could charge less but I've got bills to pay... Trust me when I tell you that, sadly, I'm working my butt off and not making much of a profit. Fortunately you don't have to buy the full set. You are free to pick the parts that you feel make the biggest improvements.
  12. Wow, that's a big order! I'll warn you that I'm currently about a week behind and trying hard to catch up. I'm fighting a nasty cold so that isn't helping... About a month ago I ordered and received a different plastic that I am going to experiment with for the A-7 (and Su-27) canopy. I've just been too busy to play with it yet and currently have too much on my plate. In time I'll give it a try. Fingers crossed. As mentioned above, I am currently about a week behind on orders. Thank you to those that have ordered and sorry about the delay .
  13. Don't forget the stuff outside the cockpit that is much more visible! http://forum.largescaleplanes.com/index.php?showtopic=74139
  14. Wow, Columbus was so long ago and my brain has been stuffed with so much other junk since then. Were you the short French-Canadian taking pictures of my wife every time I turned my back?
  15. Thanks for all the nice comments (and orders!). I'm hoping to see some builds in the near future. The MiG-29 is such a cool air-frame with so many paint and weathering possibilities. We deserve to see more built! And the paint is looking good! You should consider your current build a practice run and go for a second one with the upgrades!
  16. Great scheme you chose. Great paint. Great weathering. Great job!
  17. In addition, I still offer really nicely detailed pylons (also mastered by Alexander Rogal) that will fit the kit. Awesome missiles mastered by Alexander. And wheels to replace the nasty rubber things Trump provides (Alexander did the hubs and I did the tires). I am offering all the parts separately and also a MiG-29A combo which includes all of the above at a 10% discount. You can choose between the mixed loadout shown, an Alamo/Archer loadout or Alamo/Aphid loadout. Available at http://www.zactomodels.com/
  18. Nosecone: This new set corrects the profile, corrects the cross section which is supposed to be round and lengthens the nosecone. It includes a mounting bulkhead that spreads the kit fuselage to better accommodate the round nosecone. Advanced warning!!! There will be some sanding and putty work necessary to make it fit. But then the stock nosecone on my copy of the kit doesn't exactly fit well. It also includes a new pitot tube toe rplace the tree trunk Trumpeter provides.
  19. Chaff/flare dispensers (MiG-29A): I adapted the parts I made for the Revll kit to fit the Trump kit. This was more involved than it sounds... Trumps parts are a very weak attempt considering how visible these are (and their parts don't fit well!).
  20. Finally some new releases from Zactomodels! For the new Trumpeter MiG-29A and UB kits: Exhausts - These were made by modifying and adapting the exhausts Alexander Rogal made for the MiG-29M/K kit (also used for the Zactomodels Revell correction set). They are now full depth. I slightly revised the shape of the outer exhaust petals to have a more accurate shape. This is closer to the original part that Alexander made which I had to modify to fit, but didn't quite nail the shape. Top is the new shape. Lower is the previous version that had too much curve on the petals. Subtle, but more accurate.
  21. Because Photobucket sucks. Read this thread to fix the problem: http://forum.largescaleplanes.com/index.php?showtopic=70447
  22. The UB kit does include the "improved", re-tooled intakes. Details and pictures here. Cheers, Chris
  23. Very nice build but it's unfortunate you had trouble finding my website. http://www.zactomodels.com/
  24. Ouch... BTW, I forgot to add the /s on the red/green line comment.
×
×
  • Create New...