LukGraph

Indeed, my entry could be understood in two ways. My point of course was that the manual Wapiti project was abandoned and I started designing this aircraft in CAD. Westland Wapiti will also be released right after Albatros C.III. Then I definitely come back to the subject of the First World War. Thanks.

The Wapiti project from 4 or 5 years ago has been canceled. Manually making a model-master in these times is no longer enough and too time-consuming, so I decided to take this step. There is also good news - I started the whole project doing a completely new project in CAD software. And most definitely it will be our next model after Albatross C.III, which we are just implementing. Thank you for your patience.
Lukasz

The Wapiti project from 4 or 5 years ago has been canceled. Manually making a model-master in these times is no longer enough and too time-consuming, so I decided to take this step. There is also good news - I started the whole project doing a completely new project in CAD software. And most definitely it will be our next model after Albatross C.III, which we are just implementing. Thank you for your patience.
Lukasz

The Wapiti project from 4 or 5 years ago has been canceled. Manually making a model-master in these times is no longer enough and too time-consuming, so I decided to take this step. There is also good news - I started the whole project doing a completely new project in CAD software. And most definitely it will be our next model after Albatross C.III, which we are just implementing. Thank you for your patience.
Lukasz

The Wapiti project from 4 or 5 years ago has been canceled. Manually making a model-master in these times is no longer enough and too time-consuming, so I decided to take this step. There is also good news - I started the whole project doing a completely new project in CAD software. And most definitely it will be our next model after Albatross C.III, which we are just implementing. Thank you for your patience.
Lukasz

Gentelmen from Lukgraph,
i would like to ask you if you consider to produce PWS-26 model in 1:32. You prepared fantastic model of RWD 14 Heron and sister plane would be nice complement on the shelf. Existing plane in Cracow Aviation Museum is real advantage. What do you think?

Good evening/day
From today we accept orders - shipping time to 60 days.
https://lukgraph.pl/en_GB/p/De-Havilland-DH.90-Dragonfly-132-PREORDER/182
Description of the set:
Resin Casting Parts:
fuselage, wings (wire reinforced), nacelles, fins, larger interior elements.
3D prints:
Engine x 2, wheels x 2, rear wheel, propellers x 2, exhaust pipes, all the small interior parts and the smaller exterior parts.
Additionally, over 40 photo-etched parts (including rigging).
Professionally pressed cabin in the form of a negative x 2 + masks for painting.
Laser cut side windows.
The model has 6 colors available (Spanish version for painting - masks included).
Painting schemes:
- Civil G-AEDU (decals)
- Civil ZK-AYR (decals)
- RAF G-AECW (decals)
- Denmark Air Force (decals)
- Swedish Air Force (decals)
- Spanish Republic Air Force (masks)
We decided to make this model because of its very nice line.
We recommend it for the 1:32 scale collection of our DH.89 Dragon Rapide.
Even less experienced modelers should be able to assemble the model.
 

 

Good evening/day
From today we accept orders - shipping time to 60 days.
https://lukgraph.pl/en_GB/p/De-Havilland-DH.90-Dragonfly-132-PREORDER/182
Description of the set:
Resin Casting Parts:
fuselage, wings (wire reinforced), nacelles, fins, larger interior elements.
3D prints:
Engine x 2, wheels x 2, rear wheel, propellers x 2, exhaust pipes, all the small interior parts and the smaller exterior parts.
Additionally, over 40 photo-etched parts (including rigging).
Professionally pressed cabin in the form of a negative x 2 + masks for painting.
Laser cut side windows.
The model has 6 colors available (Spanish version for painting - masks included).
Painting schemes:
- Civil G-AEDU (decals)
- Civil ZK-AYR (decals)
- RAF G-AECW (decals)
- Denmark Air Force (decals)
- Swedish Air Force (decals)
- Spanish Republic Air Force (masks)
We decided to make this model because of its very nice line.
We recommend it for the 1:32 scale collection of our DH.89 Dragon Rapide.
Even less experienced modelers should be able to assemble the model.
 

 

Good evening/day
From today we accept orders - shipping time to 60 days.
https://lukgraph.pl/en_GB/p/De-Havilland-DH.90-Dragonfly-132-PREORDER/182
Description of the set:
Resin Casting Parts:
fuselage, wings (wire reinforced), nacelles, fins, larger interior elements.
3D prints:
Engine x 2, wheels x 2, rear wheel, propellers x 2, exhaust pipes, all the small interior parts and the smaller exterior parts.
Additionally, over 40 photo-etched parts (including rigging).
Professionally pressed cabin in the form of a negative x 2 + masks for painting.
Laser cut side windows.
The model has 6 colors available (Spanish version for painting - masks included).
Painting schemes:
- Civil G-AEDU (decals)
- Civil ZK-AYR (decals)
- RAF G-AECW (decals)
- Denmark Air Force (decals)
- Swedish Air Force (decals)
- Spanish Republic Air Force (masks)
We decided to make this model because of its very nice line.
We recommend it for the 1:32 scale collection of our DH.89 Dragon Rapide.
Even less experienced modelers should be able to assemble the model.
 

 

Good evening/day
From today we accept orders - shipping time to 60 days.
https://lukgraph.pl/en_GB/p/De-Havilland-DH.90-Dragonfly-132-PREORDER/182
Description of the set:
Resin Casting Parts:
fuselage, wings (wire reinforced), nacelles, fins, larger interior elements.
3D prints:
Engine x 2, wheels x 2, rear wheel, propellers x 2, exhaust pipes, all the small interior parts and the smaller exterior parts.
Additionally, over 40 photo-etched parts (including rigging).
Professionally pressed cabin in the form of a negative x 2 + masks for painting.
Laser cut side windows.
The model has 6 colors available (Spanish version for painting - masks included).
Painting schemes:
- Civil G-AEDU (decals)
- Civil ZK-AYR (decals)
- RAF G-AECW (decals)
- Denmark Air Force (decals)
- Swedish Air Force (decals)
- Spanish Republic Air Force (masks)
We decided to make this model because of its very nice line.
We recommend it for the 1:32 scale collection of our DH.89 Dragon Rapide.
Even less experienced modelers should be able to assemble the model.
 

 

Good evening/day
From today we accept orders - shipping time to 60 days.
https://lukgraph.pl/en_GB/p/De-Havilland-DH.90-Dragonfly-132-PREORDER/182
Description of the set:
Resin Casting Parts:
fuselage, wings (wire reinforced), nacelles, fins, larger interior elements.
3D prints:
Engine x 2, wheels x 2, rear wheel, propellers x 2, exhaust pipes, all the small interior parts and the smaller exterior parts.
Additionally, over 40 photo-etched parts (including rigging).
Professionally pressed cabin in the form of a negative x 2 + masks for painting.
Laser cut side windows.
The model has 6 colors available (Spanish version for painting - masks included).
Painting schemes:
- Civil G-AEDU (decals)
- Civil ZK-AYR (decals)
- RAF G-AECW (decals)
- Denmark Air Force (decals)
- Swedish Air Force (decals)
- Spanish Republic Air Force (masks)
We decided to make this model because of its very nice line.
We recommend it for the 1:32 scale collection of our DH.89 Dragon Rapide.
Even less experienced modelers should be able to assemble the model.
 

 

Good evening/day
From today we accept orders - shipping time to 60 days.
https://lukgraph.pl/en_GB/p/De-Havilland-DH.90-Dragonfly-132-PREORDER/182
Description of the set:
Resin Casting Parts:
fuselage, wings (wire reinforced), nacelles, fins, larger interior elements.
3D prints:
Engine x 2, wheels x 2, rear wheel, propellers x 2, exhaust pipes, all the small interior parts and the smaller exterior parts.
Additionally, over 40 photo-etched parts (including rigging).
Professionally pressed cabin in the form of a negative x 2 + masks for painting.
Laser cut side windows.
The model has 6 colors available (Spanish version for painting - masks included).
Painting schemes:
- Civil G-AEDU (decals)
- Civil ZK-AYR (decals)
- RAF G-AECW (decals)
- Denmark Air Force (decals)
- Swedish Air Force (decals)
- Spanish Republic Air Force (masks)
We decided to make this model because of its very nice line.
We recommend it for the 1:32 scale collection of our DH.89 Dragon Rapide.
Even less experienced modelers should be able to assemble the model.
 

 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

1:32 De Havilland DH90 Dragonfly - update. The cabin is ready. Professional negative molding.
Perfect transparency, shape and sharp edges of details. The kit will contain 2 copies.
More information on the kit and planned release date coming soon.
 

Thanks Mark!
 

 
Dryfitting the frames.
 
Kent

Finally received the kit and so the build has begun...
 

 
Part for the interior..
 

 
Rigging of the frames..
 

 
Some of the wooden 'treatment'
 
Kent

Kit arrived today, been working my way 'backwards' creating a 'Zeebrügge' rail car and base for the FF.33L build... 
 

 

 
Cheers: Kent

I'm looking forward to this show Soon (after receiving the PE) we start shipping. Everything else is ready.
Greetings
Lukas

Friedrichshafen FF.33L 1:32 scale kit - we accept preorders. https://lukgraph.pl/en_GB/p/Friedrichshafen-FF.33L-132-/152 Premium set: https://lukgraph.pl/.../PREMIUM-SET-Friedrichshafen.../153 Polish Service: https://lukgraph.pl/.../Friedrichshafen-FF.33L-132.../154 The German version is also available in the premium version (3 sheets of A4 clear decal paper with doped linen effect + 2 sheets clear decal plywood - dark and light and 1 mm strip masks – all made by LukGraph). First batch shipping time from 6 to 10 weeks. Limited number of models. German version FF.33L plane - 4 painting schemes. Polish version - 1 painting scheme (different vertical stabilizer and other windscreen) Kit-set description: After building, the plane has a span of 415 mm and a length of 280 mm. It gives the impression of a large model also due to its height (about 120 mm). Weight about 500 g. The model is made entirely of resin. Bearing struts (float and wings) reinforced with steel wire, wings reinforced with 1.2 mm brass wire. Solid floats in one piece (not divided). All struts are marked on the resin blocks for easier assembly. The model was made with the highest possible care. Professionally vacuformed cabin. Clear, colorful instruction. Resin parts: - fuselage - wings (wire reinforced) - tail wings (vertical and horizontal) - struts (wire reinforced) - floats (solid in 1 piece) - interior elements (main grate, bulkheads, fuel tank, engine base, seat pillows etc.). - wooden trolleys - main wooden support. The model includes parts from a direct 3D print (packed separately): - handles the rifle, - rifle + 4 magazines (3 gunner shelf) - fixing the middle section of the wings - steering wheel, - pilot and shooter seats, - complete Benz Bz III engine + exhaust pipe (packed separately) - it's almost an engineering marvel. - wheels for a trolley x 4 - propeller + hubcap - rear strut supports - engine water pipes Photo-etched parts: - Aileron pushers - rifle sight - control panel + (decal) - pilot and shooter belts - remote control pedals - buckles on the float - sewing the canvas from the bottom of the plane - propeller cover The preparation of this model was a big challenge for our small company, and persistence resulted in a quite successful product. The model is dedicated to all fans of 1-war aviation. And finally... we announce a series of several models from the First World War.