chukw Posted February 14, 2021 Share Posted February 14, 2021 On 8/7/2020 at 7:39 PM, turbo said: Question: what is the long steel pin with the fine slot cut in used for? Thanks! BTW, I'm deliriously happy with my -400 and the 550 Elite- cheers! On 8/7/2020 at 7:39 PM, turbo said: Link to comment Share on other sites More sharing options...
turbo Posted February 18, 2021 Share Posted February 18, 2021 On 2/15/2021 at 9:50 AM, chukw said: Question: what is the long steel pin with the fine slot cut in used for? Thanks! BTW, I'm deliriously happy with my -400 and the 550 Elite- cheers! You can feed the end of a bit of sandpaper into the slot and wrap it around the bit to use for sanding. Haven't tried it myself as have the D400. chukw and Troy Molitor 2 Link to comment Share on other sites More sharing options...
Troy Molitor Posted February 19, 2021 Author Share Posted February 19, 2021 Sorry for the late reply gents. We were hammered down with an ice storm followed by a major snow snow storm in the mid south over the past week. Had some family matters to attend to first. Turbo has kindly hit the nail on the heads. Thank you. Link to comment Share on other sites More sharing options...
chukw Posted February 19, 2021 Share Posted February 19, 2021 Many thanks, Turbo! Hope you get thawed out soon, Troy- stay safe! Troy Molitor 1 Link to comment Share on other sites More sharing options...
Troy Molitor Posted February 20, 2021 Author Share Posted February 20, 2021 Hey Chukw. I though I sent you a PM last week? So sorry. What Turbo has already mentioned. Exactly. You can hone an interior of a part with sandpaper wrapped in the slit of that particular bit . My bad for the delay. Troy Link to comment Share on other sites More sharing options...
chukw Posted February 20, 2021 Share Posted February 20, 2021 13 hours ago, Troy Molitor said: Hey Chukw. I though I sent you a PM last week? So sorry. What Turbo has already mentioned. Exactly. You can hone an interior of a part with sandpaper wrapped in the slit of that particular bit . My bad for the delay. Troy No worries, troy- I didn't receive that message, but I have been using both tools with great satisfaction- cheers! Troy Molitor 1 Link to comment Share on other sites More sharing options...
Tec182 Posted October 6, 2022 Share Posted October 6, 2022 Apologies for resurrecting a old thread, but wanted to give a “shoutout” to Troy and Dee. Received my D400 sander today and couldn’t be more pleased. Most of my builds are scratch / conversions and this tool makes the work so much easier. Current project is destruction on a perfectly good 1/32 Tamiya P-51 requiring major recontouring of the cowl and fuselage. It’s been 1 step forward, 2 steps back using old school methods. Within a hour of getting the D400 the cowl is almost finished and the fuselage will soon follow. Only wished I’d had this decades ago. Landrotten Highlander, D Bellis, Rockie Yarwood and 2 others 5 Link to comment Share on other sites More sharing options...
Troy Molitor Posted October 8, 2022 Author Share Posted October 8, 2022 Thanks Walt. I have most everything in stock for the David Union accessories including the newer head shapes for the D400. I just haven't listed these items yet. When I get back to the States I'll finish adding them to my site. The newer D550 I also received a test example. I love it. The control unit has the new auto torques feature added to the controller. As soon as this gets approval, I'll also have several on order to have in stock soon after. Thanks for the shout out Walt! Troy D Bellis, chukw and LSP_Kevin 3 Link to comment Share on other sites More sharing options...
DeanJ Posted March 12 Share Posted March 12 It's been a while since the last post, but I'm just wondering if there's any new equipment out? Is the 550Elite still available or is there a newer model? Link to comment Share on other sites More sharing options...
Troy Molitor Posted March 12 Author Share Posted March 12 Hey Dean, There are a lot of new ceramic grinding bits for all the latest routers. The new D365 is a really nice pen type router with the latest auto torque feature. The latest version of the D550T has the auto torque feature which is also really nice. I have everything in stock. I also have the Euro and UK plug adaptors. I have mailed out all over the planet. Kind regards. Troy Landrotten Highlander and chukw 2 Link to comment Share on other sites More sharing options...
DeanJ Posted March 12 Share Posted March 12 Thanks Troy for the update! I've been on the fence (for a couple years!) about replacing my Dremel with a 550. Now with the new Auto Torque feature, the choice becomes clearer. Now I have to decide whether to get both the new 550 and the D365! Decisions, decisions!! Troy Molitor 1 Link to comment Share on other sites More sharing options...
Troy Molitor Posted March 13 Author Share Posted March 13 PM sent Dean. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now