Out2gtcha Posted September 27, 2017 Share Posted September 27, 2017 The G2 was intended as a ground attack and aerial interceptor, attacking typically the USAAF bomber streams during daylight operations. As such it didn't carry radar arrays nor did it have your favoured "hog nose", rather the smooth E type nose......stated with the usual caveat! Max Thanks Max! Thats kind of the lines I was thinking along, but since I wasn't sure of the exact diffs, and none of the profiles are labeled yet, I really wasn't sure which conv. I should purchase when the time comes. Link to comment Share on other sites More sharing options...
Pastor John Posted September 27, 2017 Author Share Posted September 27, 2017 You can see G-2s with both nose types. Verised nose can have 4 gun openings even. None of my options have that. Lots of G-2s with revised nose and gun pod had the weapons in the upper nose removed Artful69 and Out2gtcha 2 Link to comment Share on other sites More sharing options...
Pastor John Posted September 27, 2017 Author Share Posted September 27, 2017 Gun pods also seen on early G-4s with the FuG 202, not so many on late G-4s - my guess would be the introduction of the upward firing cannon and the tactics thus involved made extra forward fire power obsolete Artful69 1 Link to comment Share on other sites More sharing options...
Out2gtcha Posted September 27, 2017 Share Posted September 27, 2017 You can see G-2s with both nose types. Verised nose can have 4 gun openings even. None of my options have that. Lots of G-2s with revised nose and gun pod had the weapons in the upper nose removed Good to know! So it could almost be case of seeing "mix and match" air-frames. Im definitely after a night fighter with the hog nose canon and large dipole Fug radar. Link to comment Share on other sites More sharing options...
Pastor John Posted September 27, 2017 Author Share Posted September 27, 2017 As far as my decal options go this pod is for both the G-2 options, ZG 1 and Stab ZG 76. The only possible G-4 decal option to have it would have been Lent's so it will be included as standard in both kits. If you have my decal sheet Monotone Me's 32D001 the G-4 option has the FuG 202 and the gun pod and no RLM 75 mottle - just another option for you to consider Out2gtcha 1 Link to comment Share on other sites More sharing options...
Pastor John Posted September 27, 2017 Author Share Posted September 27, 2017 2Z+GB decal option is a well photographed machine in flight and on the ground, it is the only option with the early style FuG 220, Schrage Muzik, black lower right wing and the only option with the MG 151 in the nose instead of the Mk 108 - great looking bird in my own opinion Out2gtcha 1 Link to comment Share on other sites More sharing options...
MikeMaben Posted September 27, 2017 Share Posted September 27, 2017 Would it be considered important to include the schrage muzik gunsight ? http://forum.largescaleplanes.com/index.php?showtopic=70239&p=965595 Bill Cross and Out2gtcha 2 Link to comment Share on other sites More sharing options...
mozart Posted September 27, 2017 Share Posted September 27, 2017 Would it be considered important to include the schrage muzik gunsight ? http://forum.largescaleplanes.com/index.php?showtopic=70239&p=965595 It would be as far as I'm concerned, if not it'll be scratch built. Max Bill Cross 1 Link to comment Share on other sites More sharing options...
Dennis7423 Posted September 28, 2017 Share Posted September 28, 2017 Pastor John- May have been covered already, if it was I missed it. What's your plan for the rear canopy? vac-form, as per usual, or something different? I am not the best with vac-form, and even worse when it comes to making it "blend" with injection molded parts. Is there any chance for resin, or even injection molded rear canopy parts? - Dennis S. Thornton, CO USA Link to comment Share on other sites More sharing options...
Pastor John Posted September 28, 2017 Author Share Posted September 28, 2017 No Dennis sorry it will be vac form - the cost of the kit and amount of parts required plus the thinness of the excellent kit clear parts prohibit the expensive of resin or injection. The vac will work perfectly - started the tool 1 hour ago. It will be very easy to cut for anybody Link to comment Share on other sites More sharing options...
Artful69 Posted September 28, 2017 Share Posted September 28, 2017 (edited) Thanks Max! Thats kind of the lines I was thinking along, but since I wasn't sure of the exact diffs, and none of the profiles are labeled yet, I really wasn't sure which conv. I should purchase when the time comes. You can see G-2s with both nose types. Verised nose can have 4 gun openings even. None of my options have that. Lots of G-2s with revised nose and gun pod had the weapons in the upper nose removed Brian ... as Ps.John says ... You get photos of all sorts ... The only way to really tell what you'll need for each A/C is to start with the basic airframe (F or G) and research the rego! With all the various factory/field mods, it really was a dogs breakfast! John ... standard fit out from the factory would have included all armaments if my references are right ... once the A/C got handed over to the pilot however, all bets are off! I reckon you'll find plenty of photos of the same A/C with various bits either missing or modified ... Heinz Bärs Fw.190A-7 is a good example of a field mod'ed A/C ... he had outboard wing armaments removed because he preferred the performance gains, rather than the additional firepower. Since he was from the "School of Marseilles" he didn't need much of that to get the job done anyway! ... Still you'll find photos of his A/C ... Both Red 13 and Red 23 (his spare) with the outboard armament installed! Gun pods also seen on early G-4s with the FuG 202, not so many on late G-4s - my guess would be the introduction of the upward firing cannon and the tactics thus involved made extra forward fire power obsolete ... and again ... here you'll find A/C with both ... and also A/C with all the nose armament removed completely, the openings blanked off and just the SM array - for additional speed and manoeuvrability. multiple radar types installed etc ... again it can be all very confusing ... Here's a link that helps me sort out all the various bits and pieces available: http://www.historyofwar.org/articles/weapons_bf_110G.html Rog Edited September 28, 2017 by Artful69 Link to comment Share on other sites More sharing options...
onosendai Posted September 29, 2017 Share Posted September 29, 2017 Gun Pod printed - cost a fortune but its fantastic. I think it is printed with dental resin that costs two or three times the normal, i've the same Form2 printer. Link to comment Share on other sites More sharing options...
Pastor John Posted September 29, 2017 Author Share Posted September 29, 2017 Its printed on an SLA printer by SBS here is Hungary - this was at half resolution! Full resolution would have cost double - still I am very happy Link to comment Share on other sites More sharing options...
Pastor John Posted September 29, 2017 Author Share Posted September 29, 2017 Does anyone have a good photo looking dead on the inside of the 110 oil cooler cowling from one of the occasions where it has been off and on the floor at Hendon - I have some photos but none of them show everything. Thanks in advance Link to comment Share on other sites More sharing options...
DeanKB Posted September 29, 2017 Share Posted September 29, 2017 Do you have Aero Detail 21? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now