HobbyZoneUSA Posted April 14, 2018 Share Posted April 14, 2018 When I assembled the Hasegawa 1/32 Fw 190D-9, I was impressed with the engineering of the wing/fuselage join such that the model didn't need to sit in the HobbyZone USA PS01 Aircraft Jig. After painting was finished and the decal process started, that's when I ran into problems - the constant maneuvering of the model to apply decals was going to damage the landing gear. The solution? Remove one arm of the PS01 and use the remaining jig to cradle the model while I rotate it around to apply decals! No landing gear were harmed in the application of these decals! Gigant, LSP_Kevin, BiggTim and 1 other 4 Link to comment Share on other sites More sharing options...
Gigant Posted April 14, 2018 Share Posted April 14, 2018 (edited) EDIT: In looking at your jig at length, I have a question. What about the situation where the model aircraft is one of those plastic kits without locating pins or tabs. The problem I have is the horizontal tail-planes need to be kept in alignment for the assembly and the curing of the adhesive while both ends of the fuselage are supported. How does your jig address that problem? Edited April 15, 2018 by Gigant Link to comment Share on other sites More sharing options...
HobbyZoneUSA Posted April 15, 2018 Author Share Posted April 15, 2018 In your example, you'd tape or rubber band the nose into the front cradle, lock your wingtips into the wing jigs using the magnetic clamps, allowing the tail to sit out in space. The tailplane cradle can then be adjusted to hold both of your horizontal stabs in position whilst the glue cures. Gigant 1 Link to comment Share on other sites More sharing options...
Gigant Posted April 16, 2018 Share Posted April 16, 2018 Thank you. Link to comment Share on other sites More sharing options...
Tonsav1304 Posted April 16, 2018 Share Posted April 16, 2018 Hi where can I purchase one of these plz in the U.K. and do they hold upto 1/24 scale aircraft Link to comment Share on other sites More sharing options...
LSP_K2 Posted April 16, 2018 Share Posted April 16, 2018 Link to comment Share on other sites More sharing options...
HobbyZoneUSA Posted April 17, 2018 Author Share Posted April 17, 2018 Hi where can I purchase one of these plz in the U.K. and do they hold upto 1/24 scale aircraft The dimensions for the PS01 are on our website so you can gauge whether it will hold a given model. I've had everything from a 1/72 P2V-7 Neptune to a 1/28 T-34 Mentor in it, including the 1/32 F-35A and Fw 190D-9, but the 1/48 Ju 52 had too great a wingspan for the jig. The short answer to your 1/24th question is: it depends on the dimensions of your model. As for availability outside the US, at present no. These are currently made exclusively for HobbyZone USA and we don't ship outside North America (sorry). At some point, HobbyZone.pl may offer these globally, but I have no idea when that might happen. Link to comment Share on other sites More sharing options...
HobbyZoneUSA Posted April 17, 2018 Author Share Posted April 17, 2018 ???? Link to comment Share on other sites More sharing options...
STWilliams Posted April 17, 2018 Share Posted April 17, 2018 I'm afraid you need one of these: Link to comment Share on other sites More sharing options...
HobbyZoneUSA Posted April 17, 2018 Author Share Posted April 17, 2018 I'm afraid you need one of these Interesing, but I'm happy with the PS01 for my purposes. Link to comment Share on other sites More sharing options...
Bstarr3 Posted April 18, 2018 Share Posted April 18, 2018 I'm afraid you need one of these: What is that magnificent piece of kit? Link to comment Share on other sites More sharing options...
Hawkwrench Posted May 1, 2018 Share Posted May 1, 2018 Does the jig work for helicopters? Maybe they should design one for them. Tim Link to comment Share on other sites More sharing options...
ssculptor Posted May 1, 2018 Share Posted May 1, 2018 I'm afraid you need one of these: OK. So what is this and where do we find one to buy? Just showing us this jig without telling what it is is just like a child taunting "I got something you don't have." Link to comment Share on other sites More sharing options...
Gerhard Posted May 1, 2018 Share Posted May 1, 2018 The dimensions for the PS01 are on our website so you can gauge whether it will hold a given model. I've had everything from a 1/72 P2V-7 Neptune to a 1/28 T-34 Mentor in it, including the 1/32 F-35A and Fw 190D-9, but the 1/48 Ju 52 had too great a wingspan for the jig. The short answer to your 1/24th question is: it depends on the dimensions of your model. As for availability outside the US, at present no. These are currently made exclusively for HobbyZone USA and we don't ship outside North America (sorry). At some point, HobbyZone.pl may offer these globally, but I have no idea when that might happen. May I ask why not? Link to comment Share on other sites More sharing options...
HobbyZoneUSA Posted May 4, 2018 Author Share Posted May 4, 2018 (edited) May I ask why not? Hi Gerhard, when we first released the PS01, we did receive a great deal of international interest, but for whatever reason, the cost of shipping is high, and when passing that information along, everyone agreed and we have not sold a single jig outside of the US for that reason. That said, we do sell these through our eBay store and they have a (relatively) lower cost shipping option which has seen a few PS01s go to New Zealand, Germany, and elsewhere. For HobbyZone USA, the cost of postage to the eBay shipping hub is minimal, so that might be an option. Edited May 4, 2018 by HobbyZoneUSA Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now