DoogsATX Posted November 5, 2014 Share Posted November 5, 2014 Recently, I was contacted by The Weathering Magazine about contributing a build for an upcoming issue with a theme of late-war Luftwaffe aircraft. While exciting, it's also a bit daunting, since the build has to be done the first week of January. I immediately veered toward a late 109 - last year I built Hasegawa's G-4 in 54 days and Revell's G-6 in 44, so the good ol' Messerschmitt seemed a safe bet for getting in under the deadline. I initially chose a K-4, but it was one of those things where absolutely nothing went right from the start, leaving that sense of ill luck. Decided to put the K-4 back in the box and do a G-10 instead, and started looking for schemes. A bit frustrating, because there's one I've wanted to do for a long time, but it was a recce version and the only camera fairings I knew of were long since out of production. Until I realized Quickboost made one... Between the Quickboost fairing and Trumpeter's recent 1/32 G-10, I'll be tackling "Black 12"... The magazine thing means I'll have to take this build dark once it comes around to painting, but I've got the go-ahead to show the construction and figured there might be some interest in it, since you don't see too many Trumpeter 109s being built. The brush-off they seem to get is unfortunate. Accuracy blah blah - it's not like the Hasegawa or Revell kits are anywhere near perfect in this regard. And Trumpeter has them, er, trumped in the engineering department. Full-length fuselages, single-piece lower wings, the only design of the three that aligns to the actual cowl hatches instead of the lazy top trough approach. Anyway - work kicks off this weekend! Stay tuned... Zero77, rafju and Alburymodeler 3 Link to comment Share on other sites More sharing options...
Thomas Lund Posted November 5, 2014 Share Posted November 5, 2014 (edited) Mmmmmm - you can never have too many 109's. Good choice on marking - will look forward to this Only thing I find really bad on the Trump 109's is the short rudder, easily fixed with a little evergreen and rescribing... Edited November 5, 2014 by Thomas Lund Link to comment Share on other sites More sharing options...
Gisbod Posted November 5, 2014 Share Posted November 5, 2014 Looking forward to this one Matt It's got so many layers of effects - right up my alley! Good luck Guy Link to comment Share on other sites More sharing options...
Loic Posted November 5, 2014 Share Posted November 5, 2014 (edited) Sounds interesting Matt Edited November 5, 2014 by Loic Link to comment Share on other sites More sharing options...
DoogsATX Posted November 5, 2014 Author Share Posted November 5, 2014 Mmmmmm - you can never have too many 109's. Good choice on marking - will look forward to this Only thing I find really bad on the Trump 109's is the short rudder, easily fixed with a little evergreen and rescribing... The rudder may not even be an issue on the G-10 since it's got the tall rudder, which I don't think Trumpeter has boxed in 1/32 yet. Thomas Lund 1 Link to comment Share on other sites More sharing options...
Daywalker Posted November 5, 2014 Share Posted November 5, 2014 I have always wanted to build this 109, love the colors and the general filth on the airframe. Will enjoy watching this one! Link to comment Share on other sites More sharing options...
mywifehatesmodels Posted November 5, 2014 Share Posted November 5, 2014 Tagging this one for sure! John Link to comment Share on other sites More sharing options...
BGB Posted November 5, 2014 Share Posted November 5, 2014 Hello, I bought one recently and its a very nice model.the only thing is the position of the oil filler hatch it is in the lower position wrong for the G-10 but otherwise,Ok Cheers Boris Link to comment Share on other sites More sharing options...
DoogsATX Posted November 5, 2014 Author Share Posted November 5, 2014 Hello, I bought one recently and its a very nice model.the only thing is the position of the oil filler hatch it is in the lower position wrong for the G-10 but otherwise,Ok Cheers Boris Good to know! Link to comment Share on other sites More sharing options...
Maurice Posted November 6, 2014 Share Posted November 6, 2014 (edited) Lovely project, the scheme is sublime. It seems that this aircraft didn't have the landing gear doors, perhaps due to the fact that by those days ending the war, production was very desperate. Edited November 6, 2014 by Maurice Link to comment Share on other sites More sharing options...
DoogsATX Posted November 7, 2014 Author Share Posted November 7, 2014 The G-10 showed up yesterday Need to soak the parts before I can properly kick this one off, but I did a quick test-fit last night. Overall I'm pretty happy with the engineering. The only real issue I found was the presence of a wing root gap. The way things go together, it looks like the cockpit floor and various other internal bits may act as spreaders. If not, the gap seems like it can easily be filled with some strip styrene. mywifehatesmodels and Zero77 2 Link to comment Share on other sites More sharing options...
Muddi Posted November 8, 2014 Share Posted November 8, 2014 Nice project. I plan on doing the same machine out of the Hasegawa G-10, so I will follow your build closely. Nico Link to comment Share on other sites More sharing options...
Nicholas R Larson Posted November 8, 2014 Share Posted November 8, 2014 Where does one find the decals/masks/markings to do this aircraft? Link to comment Share on other sites More sharing options...
DoogsATX Posted November 8, 2014 Author Share Posted November 8, 2014 Official work began on the G-10 last night. Sadly the Barracuda spinner is just a touch to wide in diameter to fit the Trumpy kit, so I'll be using the kit parts - which are a far sight better than the punishing Revell spinner at least. A few notes so far... This is a solid kit so far. The buildup is very different from any 109 I've ever touched (Eduard, Hasegawa, Revell, and a 1/48 Tamiya), but very logical. Detail is solid throughout. Not up to Tamiya standards or even what I've encountered in some recent Trumpy/Hobby Boss stuff like the 1/48 Intruder, but FAR better than what you'll get in a Hasegawa box. For the sake of speed/laziness, I'll probably be poaching a few cockpit bits from an Eduard set I've got for the G-6. The engine assembly has a pretty sloppy connection to the firewall, but that ends up working out in its favor, since it gives it plenty of play to assure proper alignment. Ultimately it's trapped in place by a combination of cockpit, exhausts and prop hub elements. Speaking of exhaust stubs - this is another 109 where you have to put the things in before you close the fuselage. The stubs are individual and have a bit of play, so I used the fuselage halves to help make sure they aligned properly. The cowl panels continue to fit amazingly well - arguably better than on the real thing. Zero77 and rafju 2 Link to comment Share on other sites More sharing options...
DoogsATX Posted November 10, 2014 Author Share Posted November 10, 2014 Work proceeds on the cockpit. I'd intended to stick with kit parts, but then I found an Eduard set I had lying around for the Trumpeter G-6, and then I found a resin 109G control stick and so there's a bit of aftermarket now, but nothing major. Still plenty of weathering I want to do, plus I need to sort out the seatbelts. I have a set of the green-fabric HGW belts but they just look lost amid the RLM 66. So I need to track down some good old beige ones. Perfect excuse to hit the LHS, right? I also got the Barracuda wheels drilled out last night. I'm a bit worried that one of them is slightly off-center so I need to poke with that a bit further. But even so, they're hands down the best 109G legs in this scale. The Hasegawas are competent but the molded-on brake lines are awkwardly done. The Revell legs are a three-piece torture and probably among the single worst parts of the kit. The Trumpy legs, meanwhile, consist of a single, well-detailed main shaft, separate oleo scissors, a plastic brake line, and some PE strips to clamp the line to the gear leg. They're great. They get the job done, fit, and don't screw around. SinuheH, nmayhew, mywifehatesmodels and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now