oyoy5 Posted January 28, 2019 Share Posted January 28, 2019 Just wanted to see if it’s good and goes together well before I buy one. Thank you for any help. Link to comment Share on other sites More sharing options...
LSP_Ray Posted January 28, 2019 Share Posted January 28, 2019 I did a review: Montex Special Mig-3 Early Masks and Conversion. LSP_K2 and Alain Gadbois 2 Link to comment Share on other sites More sharing options...
alain11 Posted January 28, 2019 Share Posted January 28, 2019 Hi it would seem that the prop spinner has to be fixed for the early Mig ...take a look here Alain https://www.google.com/url?sa=i&source=images&cd=&cad=rja&uact=8&ved=2ahUKEwjooovJpJDgAhXGyYUKHXpUDHoQjhx6BAgBEAM&url=http%3A%2F%2Fhsfeatures.com%2Ffeatures04%2Fmig3bg_1.htm&psig=AOvVaw1QcbobW3hasc8ia_Jx5tzn&ust=1548758334989019 Link to comment Share on other sites More sharing options...
Kagemusha Posted January 28, 2019 Share Posted January 28, 2019 Fusion make a superb prop and spinner Alain Gadbois 1 Link to comment Share on other sites More sharing options...
alain11 Posted January 28, 2019 Share Posted January 28, 2019 3 hours ago, Kagemusha said: Fusion make a superb prop and spinner indeed !!! early , or late type ..... I agree , the difference beetween the two type is not so obvious at the first sight Link to comment Share on other sites More sharing options...
Alain Gadbois Posted January 29, 2019 Share Posted January 29, 2019 In the article, the spinner is corrected because it is not pointed enough. It is not an early vs late issue. Alain Link to comment Share on other sites More sharing options...
alain11 Posted January 29, 2019 Share Posted January 29, 2019 11 hours ago, Alain Gadbois said: In the article, the spinner is corrected because it is not pointed enough. It is not an early vs late issue. Alain yes !you are right ...no matter , anyway , there is an issue with this kit part , that must be fixed ... isn't it ???, Alain Link to comment Share on other sites More sharing options...
Alain Gadbois Posted January 29, 2019 Share Posted January 29, 2019 5 hours ago, alain11 said: yes !you are right ...no matter , anyway , there is an issue with this kit part , that must be fixed ... isn't it ???, Alain That's correct! The shape is off as it is a bit too fat. The panel line around should be back a bit ( actually where the rivet line is) and the 6 rivets are raised in reality. These are fairly minor issues but the propellor blades are the main and most visible problem and really should be replaced. Alain Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now