AEROPOXY Posted February 10, 2020 Share Posted February 10, 2020 (edited) Boeing F3B-1 Command Aircraft by LUKGRAPH bought at 2019. Moson model show , at LUKGRAPH stand , waited till Jan.2020 to start work on it , Overall, nicely enginered , well casted and finely detailed , one of easiest to build resin kits i work on, and i build it a lot , to mention just few labels , Preiser, MDC/RB, HPH, Legato, Fisher, Omega, Planet, NKR, Montex ... Not counting my own, Aeropoxy range kits... (they are out of contention) :-( Starting by the book, nice illustrated 16 pages A4 instruction. Cleaning and assembling, Cockpit, Fuselage, Engine, Subassemblies, Priming with Mr Surfacer, Wings, tail, struts, with copper wire made anchors for bracing , drilled and glued, and painting, Silver, Yellow, Revell 310 Gray, Humbrol 175 (now discontinued , use any Hellgrau 76) Blue, Revell 350 Windscreen, 0.1mm thin clear acetate foil, cuted using provided template and glued to the etched frame with MrColor gloss lacquer. Decalling , over Humbrol Clear gloss varnished surfaces , Somehow, i do not take pics of rigging process, (which take whole sunday afternoon) but this is done in usual way, using 0,2mm fishing line, and microtubing as a turnbuckles, drops of superglue and later spanned with hot screwdriver tip. After decalling, started with final lacquer coats to gain high gloss finish, using recomended MrCollor GX100 ... what a disaster... Dark blue instantly became light gray and dust white..., Almost a month of work , instead of RFI topic, was candidate for RFTB , Ready for trash bin... But, after overnight drying, old, trusty Revell 01 gloss and Humbrol Clear brings salvation. Almost all the traces of dust removed , just few spots i must to overspray with Revell 350. After a subtle wash and weathering, Boeing Command Aircraft was ready for inspection, here: Edited February 10, 2020 by AEROPOXY LSP_Kevin, ivanmoe, Out2gtcha and 4 others 7 Link to comment Share on other sites More sharing options...
AEROPOXY Posted February 10, 2020 Author Share Posted February 10, 2020 Well, at the end, must explain, why not follow the LUKGRAPH painting and decalling instructions , and chose yellow top wing scheme. First, its more colorful , and to me, represents 1930's Naval aviation "standard". So, i do little research and found , that 7738 , from CV-2, USS Lexington, 1931/32, have few paint scheme incarnations , after some overhauls, and in part of its service life, have yellow topsides, clearly shown at this photo, where wing topside is darker than silver undersides. 7738 photos found at Papermodels forum, explaining source of these pics. Also , was puzzled with paint description given by Lukgraph, Admiral blue ; Silver and Light Gray , generic, but not enough for me. Found this Esoteric 1/72 scale vacuform Boeing F3B-1 kit instructions, and Colorslide decals , where exact FS is given and paints stated as: Orange Yellow FS 13538 ANA 506 Gray FS 16473 ANA 512 Strata Blue FS 15045 Using color conversion charts, closest paints i have in my stock are Revell 310 Lufthansa Yellow, Revell 350 Lufthansa Blue and Humbrol 175. With some scale effect blending , hope this is real representation of Boeing F3B-1 from USS Lexington. LSP_Kevin, Out2gtcha and USMC Herc 3 Link to comment Share on other sites More sharing options...
CZPetrP Posted February 10, 2020 Share Posted February 10, 2020 Working with the resin kit is not easy.... Good work. I commented on it in the gallery. Link to comment Share on other sites More sharing options...
Out2gtcha Posted February 10, 2020 Share Posted February 10, 2020 Indeed! Well done on the model, and sorry to hear about the gloss issues. Never seen the white dusting effect on gloss application. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now