Paboum53 Posted February 3, 2017 Share Posted February 3, 2017 To Jim: congratulation for your very nice Griffon engined Spifires! This is the kind of conversion I dream to do for ages ! One little thing though: it seems you used the early Mk I/II/V windscreen (without the exterior bullet proof panel) from the Revell kit. The Spitfire Mk V (late) and all other models after that used another typical windscreen with the bullet proof panel on the inside (like in Tamiya's Mk IX and XVI). I bought the Revell Mk II kit and did'nt built it (even thinking of getting rid of it) just because something was not "right" with the canopy and especially the windscreen. I read somewhere that the fuselage width in front of the cockpit is too large and squared off.. I really do admire you work nevertheless! Cheers! Henri Alburymodeler and Anthony in NZ 2 Link to comment Share on other sites More sharing options...
justjim1 Posted February 6, 2017 Share Posted February 6, 2017 hi henri guilty as charged I did not have the correct screen so next one I shall cut and reduce the external bullet proof screen and attach to the inside of the screen. jim David66 1 Link to comment Share on other sites More sharing options...
justjim1 Posted February 6, 2017 Share Posted February 6, 2017 HI again Henti I have nearly finished my next two spitfire conversions ,a correction set for the revell MKIIa so a MKI/II can be built better ,the next is another MKXIV lowback (bubbletop) I have just to finish the canopy and make vacuform canopies .jim David66 and Alburymodeler 2 Link to comment Share on other sites More sharing options...
LSP_K2 Posted February 7, 2017 Share Posted February 7, 2017 For those that don't fully comprehend what's being discussed here (I certainly didn't), Jim Brown does a line of 1:32 aftermarket sets. The only two reviews I can find on LSP, are located here. Looks like interesting stuff, and I do recall the Typhoon set now (naturally). Link to comment Share on other sites More sharing options...
Paboum53 Posted February 7, 2017 Author Share Posted February 7, 2017 (edited) hi henri guilty as charged I did not have the correct screen so next one I shall cut and reduce the external bullet proof screen and attach to the inside of the screen. jim Hmmm.. I think this will not be sufficient: the windscreen side panels on the Mk IX/XIV/XVI are flat, not rounded as in the Mk II/II early V.. See what I mean? One more question: will your conversion set fit the Tamiya kits? Bye for now, Henri Edited February 7, 2017 by Paboum53 LSP_K2 and Alburymodeler 2 Link to comment Share on other sites More sharing options...
Alburymodeler Posted February 7, 2017 Share Posted February 7, 2017 The upcoming Mk IX from Revell will be the ideal donor kit for these conversions and the parts should fit as it seems to be based on the slightly inaccurate Revell Mk II, for which these parts are designed. For the Mk 12 though, you will need to replace one of the underwing radiators with a piece from another early variant kit or Barracuda etc. Ideally though, we could all justify cutting up Tamiya Spitfires. Cees Broere 1 Link to comment Share on other sites More sharing options...
justjim1 Posted February 12, 2017 Share Posted February 12, 2017 Hi henri thanks for the input I see what you mean now I not that the front screen is the same as the bubble top I am in the process of of making a master for the bubble top to be made as a vacuform for my next griffon spitfire ,this is the lowback (bubbletop ) when I have this in production the front screen may be the solution . regards Jim Link to comment Share on other sites More sharing options...
justjim1 Posted February 12, 2017 Share Posted February 12, 2017 hi Alburymodeler I will be trying this on the new revell spit as soon as I can get one , as regards the underwing radiator I have now made a new one to replace the revell part as the one with he kit is too small and I will supply this with the MKXII conversion as soon as I have the parts moulded .regards jim ps I am sure the conversions will fit the tamiya kit as the cowl is cast hollow and the shape can be adjusted by applying heat and gently reshaping . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now