Guest Dekenba Posted April 15, 2013 Share Posted April 15, 2013 I've got a lovely compressor with a tank that works fine. However, the pressure adjustment gizmo is fixed to the compressor and my problem is that I want to be able to adjust the pressure without having to bend down to the unit every time, primarily because I want to stick it in a cupboard. Can I stick some sort of second pressure adjuster towards the end of the hose that would allow me to adjust the pressure? I think not because it would be outside of the feedback loop? Link to comment Share on other sites More sharing options...
Smokeyforgothispassword Posted April 15, 2013 Share Posted April 15, 2013 I've got a lovely compressor with a tank that works fine. However, the pressure adjustment gizmo is fixed to the compressor and my problem is that I want to be able to adjust the pressure without having to bend down to the unit every time, primarily because I want to stick it in a cupboard. Can I stick some sort of second pressure adjuster towards the end of the hose that would allow me to adjust the pressure? I think not because it would be outside of the feedback loop? You could run a hose from the compressor to a remote regulator, then attach your airbrush to that. I think its a better solution than running a long hose from in your cupboard. Link to comment Share on other sites More sharing options...
Plasticsurgeon Posted April 15, 2013 Share Posted April 15, 2013 (edited) Hello, I think one of these would be the answer..... I don't know what they're called in English; http://www.detectorshop.nl/airbrush/lucht-aansluitingen/snelkoppeling-luchtregelaar-1-8-bu---1-8-nippel-bi.php it's to connect your AB to the hose but with pressure-adjuster...... and cheaper than a regulator. Edited April 15, 2013 by Plasticsurgeon Link to comment Share on other sites More sharing options...
GuildAero Posted April 15, 2013 Share Posted April 15, 2013 I got a nice water trap and regulator combined for £9 off ebay. Does the trick perfectly. Martin Link to comment Share on other sites More sharing options...
Smokeyforgothispassword Posted April 16, 2013 Share Posted April 16, 2013 My post didn't make 100% sense (more like 30%) If you have your compressor in the cupboard, your far better off running a hose to a regulator near your airbrush, and running a short hose from the reg to the brush, I hope this makes sense, Link to comment Share on other sites More sharing options...
Bill_S Posted April 16, 2013 Share Posted April 16, 2013 Hello, I think one of these would be the answer..... I don't know what they're called in English; http://www.detectorshop.nl/airbrush/lucht-aansluitingen/snelkoppeling-luchtregelaar-1-8-bu---1-8-nippel-bi.php it's to connect your AB to the hose but with pressure-adjuster...... and cheaper than a regulator. This is a flow regulator; you can regulate either flow or pressure, but not both. It's no problem putting an additional regulator on the line - just remember that the maximum pressure downstream can be no higher than that set with the regulator closest to the tank. Link to comment Share on other sites More sharing options...
Guest Dekenba Posted April 16, 2013 Share Posted April 16, 2013 This is a flow regulator; you can regulate either flow or pressure, but not both. It's no problem putting an additional regulator on the line - just remember that the maximum pressure downstream can be no higher than that set with the regulator closest to the tank. So if I set the regulator on the tank to 35, then the additional downstream regulator at, say, 20, I'll get 20 out of the airbrush? Link to comment Share on other sites More sharing options...
Bill_S Posted April 16, 2013 Share Posted April 16, 2013 Yes... Link to comment Share on other sites More sharing options...
Lee White Posted April 16, 2013 Share Posted April 16, 2013 I think part of the potential problem is the pressure level in the tank, and by extension, the pressure in the hose between the tank and regulator- If you have 100psi in the tank, as an example, and the hose can safely hold 80, there would be an obvious danger there. otherwise, the only problem would be with condensation, and that can be fixed with a water trap. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now