swede Posted April 27, 2016 Author Share Posted April 27, 2016 Ron, could you when you get a chance, send me the kit number, part number and fret alpha designator on the fillet part? Maybe I can use it as a starting point. If not, its off to the attempt with the plasti sheets. Gives me the willies thinking about that....... Link to comment Share on other sites More sharing options...
swede Posted April 27, 2016 Author Share Posted April 27, 2016 I am still trying to find better pics of the fillet. There are a number of profile shots, good for height and length but not for the width, from the vertical tail to the tip Link to comment Share on other sites More sharing options...
swede Posted April 28, 2016 Author Share Posted April 28, 2016 OK, heres one......in the enclosed site, Jackie Cochrans/ Jimmy Stewart's #90 Thunderbird photos. This was raced in 1949. Does that fillet look more like the late Inglewood modification? http://www.thisdayinaviation.com/jackie-cochrans-north-american-aviation-inc-p-51c-mustang-racer-n5528n/ Swatto 1 Link to comment Share on other sites More sharing options...
MikeC Posted April 28, 2016 Share Posted April 28, 2016 I will assume that the fillet on the -C model (F-6C) is the swayback or can I use the -D model fillet to construct it? I suck with thin plasticard ........ F-6C = P-51B/C, so yes, you assume right. Link to comment Share on other sites More sharing options...
swede Posted April 28, 2016 Author Share Posted April 28, 2016 Both are curved at the juncture with the leading edge of the vertical. On the -D's and the -K's it comes straight back and the straight up the Vertical. Not sure how to post photo on here but even a quick glance you can see the difference. Link to comment Share on other sites More sharing options...
Jack Posted April 28, 2016 Share Posted April 28, 2016 Here's an illustration taken from an osprey aviation publication on the P51 by Michael O'Leary, which shows what is what: Swatto 1 Link to comment Share on other sites More sharing options...
swede Posted April 29, 2016 Author Share Posted April 29, 2016 That shows what I was saying.....the -51 BNA is curved and the F-6D has more hard lines........for lack of a better description.....Again though, the A/C I am working with looks like it has the early Inglewood fillet to me. I was after any other thoughts on this as the shape it totally different! Swatto 1 Link to comment Share on other sites More sharing options...
Jack Posted April 29, 2016 Share Posted April 29, 2016 (edited) Just out of aeronautical interest, why was it curved on the B's en C's and not straight edged like on the others, i mean construction wise it would have been easier to do the straight edge overall, wouldn't it?? Edited April 29, 2016 by Jack Link to comment Share on other sites More sharing options...
swede Posted April 29, 2016 Author Share Posted April 29, 2016 I was wondering the same thing....but in the interest of figuring out the proper fillet and how to create it I wasn't going to open that can of works ........ Link to comment Share on other sites More sharing options...
Jack Posted April 29, 2016 Share Posted April 29, 2016 well it's not actually a can of worms, but just wondering why there is a difference......? Link to comment Share on other sites More sharing options...
swede Posted April 30, 2016 Author Share Posted April 30, 2016 Why I like this site....great advise and you sign off smarter than when you log on !!!!!!!! LSP_K2 1 Link to comment Share on other sites More sharing options...
Craig361 Posted April 30, 2016 Share Posted April 30, 2016 (edited) The dorsal fin that was installed in the field (depots/ base engineering sections) for the B/C's were P/N 104-25001 (Tech Order 01-60JD-43), these were also fitted to the last C models on the production line (per production print). D's (and K's) Inglewood and Dallas production received P/N 109-25001 dorsal fin (the 'straight dorsal fin). The 104-25001 dorsal fin is the one with the curve in it. In discussions with others who have researched this as to the curvature this was not intended but an initial manufacturing occurrence as the print for the part does not show the curvature or include any design data allowance for it. Someone finally figured out how to remove the curvature without damaging the piece, the dorsal fin has compound shapes and aluminum can be tricky even when using 'O' (soft) material. The dorsal fins (along with a reverse rudder boost tab) were installed to prevent overloading of the horizontal surfaces when the aircraft assumed high angles of yaw during certain maneuvers. Edited April 30, 2016 by Craig361 Jack 1 Link to comment Share on other sites More sharing options...
Craig361 Posted April 30, 2016 Share Posted April 30, 2016 The B/C and D couldn't have had exactly the same fin fillet part number. The shape of the aft fuselage spine where it attached was completely different. Yep, 'misspoke' on that! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now