MtFlyer

GeeBee: Thanks for the info. just what I wanted to know. Looking at the photo I can't tell if the Creep was OD over grey or a VERY faded black? MtFlyer

Would like any general info but especially need Serial Numbers and a drawing of the "Creep" marking and shape and a guess at colors of the creep. Any help appriciated MtFlyer...aka Keith The photo come off the net from the Warbired Information Exchange please respect the copy write laws.

I would hope so, since their are a lot of really colorful Seastar's. It wouldn't be a simple conversion since the cockpit glazing is totally different and read fuselage and tail have to be reconfigured. We Navy fans can hope someone does it.

Hi Ludek: I built a P-39L from the kit last fall and used Zots decals. I really enjoyed the build but I did have a few problems. I knocked over a bottle of liquid glue and it found the canopy. It melted it! I e-mailed Special Hobby and they sent me a replacement at no cost even though it was totally my fault. At the time I was building it a few people said they had a problem with the wing to fuselage fit but mine went together with no filler required. I did have a problem with the landing gear. It isn't a very positive fit and I had to re-glue the main gear a couple of times. I have seen the same problem with Trumpeter kits. A nice deep hole and nice thick pin would be so easy to engineer. I also had a problem with showing the car doors open the little tabs are fragile and I had to replace one. All in all it was a great kit and a welcome build. MtFlyer...aka...Keith

I would really like to use the kit decals supplied in the 1/32 Trumpeter A7E Corsair II for VA 192 "Golden Dragons" but I have had such poor luck with other Trumpeter decals I am afraid to try them. Has anyone out there built the A7E and used the Golden Dragon decals. What kind of luck have you had? MtFlyer aka...Keith

I am looking for a 1/ 32nd U.S. Navy Deck Crew figure era 1960-1980. Anyone know who make these figures. MtFlyer...AKA...Keith

Pappy: That is a B e a u t i f u l picture of a TBD. I think Mr. Song's heart strings will be touched by that picture alone. What is this about the A6 Intruder being a rumor? I thought that was a false rumor about the rumor. MtFlyer.

Pappy: I would also like the TBD Devastator to fill out my USN collection. Also, speaking of unsuccessful aircraft not seen in 1/32nd, how about a SB2C Helldiver, and a Vindicator from the battle of Midway. But, I agree that Trumpeter really owes us the TBD we have heard it is coming for way too long. Why say it is coming and then not deliver. MtFlyer

Barry: Thanks for the info. Could the F-8J leading edge flap be replicated by scribing a panel line down the center of the kit flap? Or is there more to it than that? MtFlyer...aka...Keith

I understand that the F-8J had had a larger Stabilizer than the F-8E How much bigger? Does any one have a drawing of the size difference? Also I understand that the leading edge flap was a "double Droop" flap can anyone describe how you would display that ,on a 1/32nd model? How about the articulated flaps how would you show them on a model? Mtflyer

Hey Guys: A couple of weeks ago I inquired about which model F8F that was used by the Royal Thai Air Force and received a great reply from Brian. It seems all the F8F sent to Thailand were F8F-1's. Thanks again Brian. You remember Brian who did "Black 2300"with a natural metal finish in foil. Wow! What a great build. Brain mentioned that the decals for 2300 from Siam Models were wrong. The decal sheet shows black and yellow tail stripes and Brian and several artist color profiles showing it in blue and white. I e-mailed Siam Models and asked for their documentation on the yellow strips and they sent back the following e-mail: Keith: Confirm by Mr. ASI (RTAF Officer) real color is Yellow-Black. In your picture as seen in White is Yellow (pale) Bearcat Photo From Mr.ASI and Photograph by Capt. Suthep You see the band from tail in the real picture. 1st band is red (pale). 1st band is flight specified : Red,White,Blue,Green. 2nd band is yellow (pale). 3rd band is Black. and alternating you can see clearly yellow band from the lower of tail. Summary : Yellow-Black Tail. Best, Sethapong Mongkolsawat I am attaching the photo that Brian sent me. It looks like a Squadron Signal publication , the color photo that I got back from Siam Models which is from the Royal Thai Air Force Museum site and the great side view I can't remember where I found it on the web but will be glad to credit or remove it as desired if the owner will contact me. Is it yellow or blue. It looks like blue is my best guess Any photo interpreters out there. Anyone stationed in Thailand during the Viet Nam war that can recall seeing a F8F and remembers the colors? MtFlyer...aka...Keith OOOPS could only upload the Thai Museum photo.

Hi : Being older than dirt I have had a tough time handling small photo etched parts for seat belts. On my most recent build of a Trumpeter SBD-5 I came up with a way to easily handle small seat belt parts. I take a small strip of 1/4" Tamiya tape about 1 1/4 inches long and stick it over the part I need to manipulate leaving the opening for the seat belt un-taped. It really made making the seat belts much easier. I know you young guys just use tweezers but your day will come so file this away.

Fred: I tried some vinyl-coated wire and the only problem was that it repelled the super glue!. What I used was aircraft instrument wire. It was real fine but sort of stiff. So as soon as I can get to the hardware store I am going to see if there are different types of wire coating. I have some lead- fabric coated fishing line that might work but it has a tendency to fray were you cut it. Maybe I can coat it with diluted white glue before I cut it. When I get home I’ll try it tonight. MtFlyer…aka…Keith

Sounds reasonable and inexpensive. I'll try it. MtFlyer...Keith

Fred: I had the same question would a 1/24 connector be out of scale. A one inch connector in real life would be 1/32nd of an inch in 1/32nd scale. I had some 3/64th brass tubing which is just a hair over 1/32 of an inch and it looked good. But I couldn't cut it without having 50% of them fly into the carpet. The DM sight didn't give the actual measurement . Since a couple of people said they tried tried the DM # 1 connectors and liked them. I decided to order a set and see how they look. MtFlyer...Keith

I thought it was Brian's build. But I looked all over LSP and couldn't locate it and didn't want to credit the wrong person. MtFlyer...aka...Keith

Thanks Hagar and Texas, Ill check out those vendors. MtFlyer...aka ...Keith

THANKS KEVIN, you have been very understanding.

Hey Guys: I have a question regarding wiring harnesses. See the attached photo and it clearly shows some sort of fitting where the spark plug wires are attached to the cowl wiring harness, i.e. ring. What is that called? Is it called a wiring loom maybe? Didn’t you like it when Monogram used to call the parts by their name rather than just a number. It was very educational. I do not have the name builder of the F4U photo but if he will contact me I will give him credit or if he wants it removed I will comply. This is just shown for illustrative purposes. Please respect the copyright laws in regard to the photo.

I have seen models built that use tiny metal connectors on their wiring harness'. Do any of you know where to get those connectors? MtFlyer...aka Keith

Step, one completed soaked the parts on dish soap and ready to spray the interior colors while still on the trees.

Down to just a couple of hours to finish my Trumpy TBF-1C Avenger as white 95. And then my bench will be clear or as clear as it ever gets which upon refection isn't all that clear. I believe that good tools should be able to put themselves away.

Matty: I tried to put the picture on but it was too big. I'll reduce it and see if it can come to you. It is number 95 the one in the background. Hope it comes to you. Keith

I am not going to guess. My reference source doesn't show it so it gone. mtFlyer aka keith

Hi: I am into the decaling stage of building the Trumpeter TBF-1C Avenger. I am using the kit decals for "white" 95 the TBF from VT-2 on the Hornet. It shows a huge bomb score and three white /// slashes. Does anyone have a photo showing that detail. Are they supposed to represent ships sunk? The only photo I can find on the net is shown below. I can just make out the bomb score board but nothing else. Can anyone help. Please respect copyright laws regarding photo shown.