tomaszhajzler

Bill, why didn't you register on forum few years earlier, I think my build could be easier. I have never found this restoration link, what's a pity. They are restoring earlier models of this plane (no one is f4b4 as on caption) but construction must be similar. Regards Tomasz

Hi all! I thought my thread is forgotten, because I didn't make any update so long. But I see my friends you took me to the blackboard. I had many problems with f...bucket. I had to pay to save my thread and I will move my photos on private server. I don't want to justify my absence on forum but as always I had no time to make updates. This stollen time was assigned on building model. Thank you for your kind comments I send one photo of my model. You can see some progress, ailerons, wires, stars on wings and many small parts which I can't remember . I think about base and exposition of my model slowly. Thank you Bill for comment and I'm glad that my thread made you to register on this awesome forum. Returning to the wings I supposed that someone named this Boeing wooden-winged because of it's mahogany spars. I examined many photos and I think that there are metal ribs. You can see construction of the wing on the background this photo. Regards Tomasz

Hi All Thank you for comments, I'm glad you like it. It's happy moment, because I fixed upper wing successfully. I was afraid this operation but everything is very well. Main problem was to correct locate fuselage struts. Many ideas,dry fittings, big stress but with happy end. [/url] Regards Tomasz

Hi All Thanks for kind comments. Upper wing is ready. I hope I show you my model with both wings in next post. See you Tomasz

Hi I'd like to thank all of you for your numerous very kind comments during this year. It's very helpful to accomplish such long and difficult for me project. Some small details for the end of the year. Battery and it's box. Venturi jet.. Scratch as usually. I wish you Happy New 2017 Year, many awesome modeling projects. I invite all of you to visit my thread next year. Regards Tomasz

Hi All Thank you for watching and nice comments. I prepared telescopic sight and gunsight for today update. Telescopic gun sight was installed first. Legs were made from broken 0.3 mm drills. There isn't rear part of sight, this element was fixed later. Next was gunsight, longer and thin. I also added end part of telescope. Nice watching Tomasz

Hi Kev Thank's, but you are to kind for me. Tomasz

Hi all Thank's for comments. Today subject is ... windscreen. Three separate clear parts (one with a hole in the middle) put into plastic guides and joined with two small fasteners. And that's all. Nothing special. Regards Tomasz

Hi Next update Second strut of center section. This one will be without fairings. I also made leather finish of the cockpit's edge. I used insulation from electrical wire. I tried different kinds of them and after many attempts I chose one. Proper cutting was necessary. After installation, as glue was used CA gel. I "sewed" headrest also, on place. Regards Tomasz

Hi All Thank's for your kind opinion. I didn't expected so many comments. Work on the same area. I added element of gun firing channel, but first I made front hoop to which this element was assembled. And after painting Regards Tomasz

Hi Guys! Nice to meet you again after long holiday break. That was break in sending posts but not at work. Intensity was lower, but it was summer time. I hope you don't forget my thread. So few photos with some progress. I finished and installed this crispy construction above brownings. Nice watching and see you next time, I hope soon Tomasz

Wonderful as always. I like to read your posts and I admire your ability to show all your efforts in such simple way. Have you ever thought about writing guide for modellers? Good luck. Tomasz

Hi All! Thank you for your kind posts once again, but I think to kind. This is 1/32 scale, if it was 1/72 it could be a big thing. 1/32 scale is for almost blind people, someone said. I prepared two crispy elements for today, two fairings of undercarriage rear strut attachment. I made them using vacuform technique as I wrote early. Nice watching Tomasz

Hi Kev When I copied these photos to the post I didn't realize that some of them are so big. Tomasz

Good evening (in my time zone) When I fixed landing gear, I didn't glue fairing on the top of left main strut and strut attachment on the other side (you can see blue tape on earlier photos) because I had to do it in right position. I also added small brackets to each other. I added small wheels with break lines. Centre-section right struts appeared on the end. And that's all for this moment. Regards Tomasz

Hi Gents I could say, long, long time ago, when I started my project ... Yes, it was five years ago, long time. Next anniversary. So I had to do something special. I fixed landing gear to the fuselage. I decided that one half will be completed but the other with fairings removed. All undecarriage expect wheels were scratchbuilding. I was affraid about geometry of this construction but everything went perfect. Nice watching. See you in sixth year of my build, may be the last. Tomasz

Hi Peter Spitfire is my favorite plane. So if I see such details it's pure pleasure. Good luck on this hard way. Regards Tomasz

Hi Peter Beautifull seat. You are master of metal. Is there any of these parts photo etched? Congratulations Tomasz

Hi! Thank you for watching and kind comments. Painting for today. Generaly I love Gunze paints. They are easy to use. So light grey is mix of four diffrent paints using template of FS paints. Red, black and silver there are also Gunze, only true blue this is Model Master enamel. Tamiya clear on the top. Regards Tomasz

Hi everybody, Struts are the main subject for today. I had to reworked them due to construction of my model and many gaps. Fuselage struts were conected with upper cover in the model. I had to separate struts and i will have to fix them with fuselage in correct places. First I had to establish lenght of vertical arms. In this case I used fuselage and struts of standard model to create template with correct angels and dimensions. Front arm was to short, so I had to increase It's lenght. Walkaround of my plane on LSP is very usefull in my project. I modified struts according photos from that place. Many thanks for Gran Moulton once again. Struts of the model. I created new mounts to the fuselage and added body on ends of struts to show these covers, Bondic glue was very usefull in this operation. I made place to mount wires in rear arm of the fuselage strut. Making fuselage struts was very complex operation and I was affraid about the result, but now I'm satisfied. Regards Tomasz

Hi Guys Thank's for nice comments I'm also fun of Peter's modelling. I don't think it's good idea. If you want to collect stamps you can do it parallel. But serious, I show my projects to encourage for more brave modelling. Regards Tomasz

Hi, Work goes on all time. There are few more vacuformed details. Box for battery Opened cover of raft compartment. Covers on wings of leanding gear struts. I plan to start painting soon, so last details on fuselage like navigation lamp and covers on tail. Sorry for long breakes but all time I've got I spend on modelling. Regards Tomasz

Hi all! Thank's a lot for kind comments. This is last update in this year, so Thank you for watching my thread and Invite you next year. Last thing which I'd like to show you this year will be construction from diffrent profiles to which all panels of machine gun bay were fastened. First I made a template, than I started to fix each profile. This is the final effect. Dry fitting on the model. Happy New Year for all of you, many successes in scale modelling. Tomasz

Hi Gents! Nice to meet you before Christmas! I changed my area of intrest to the rear part of the aircraft - tail. Stabilizers and elevators will be first. I made them earlier, but now I had to join all together. This is the effect. I wish you Merry Christmas Tomasz

Hi Guys! It;s nice to read such kind comments. Continue my story about undercariage I have to say that I was afraid of the end effect. The most difficult part was to find the idea how to do, as always. Next hundreds of fittings. Few photos of assembling set. I had to improve wheels. I added break system with arms, cords and small wheels. There is no one strut, which be added during finish assembling undercarriage with fuselage. Here dry fitting with this strut. And fitting with frame of fuselage. Nice watching. Tomasz