Bekim

Finaly , the development and cad datas are done, RBF and PD Version have different nozzles.... soon, I wil start printing .. here the nozzles of the PD : and here the RBF Version: All the best Bekim

here in isometric view... and from below..... next Step is to add the Rivets on the noses Bekim

There will be 2 Versions of the MiG PD and RBF , here the two noses ... the RBF version (on the left side ) is a little bit longer

Thats what I call modelling , well done 👍

Here the layout for 3D Print: spliting is done for doing also different Versions of the Diva best Regards Bekim

the Cockpit, damn, that was a lot of work... Seat has to be taken from Reskit, it fits perfect

Hello Gents I thought also to open the upper Airbrake .... It can be also closed

Hello Guys Thanks for the friendly commemt, all of my models are availlable. Cad datas of the Diva are finaly done ...... now next Step is to prepare the datas for 3D Printing... Best Regards Bekim

Hi Tony doing the Panel lines ; witdth is 0,3 mm , depth is 0,4 mm Rivets are 0,4 mm in diameter and also 0,4mm deep Regards Bekim

let´s start with the Cockpit, Seat is available from Reskit in 1/32 and therefore its no need to do the development... Regards Bekim

puuh, that was a lot of work, finaly the landing gears are done.... can be done in closed and open position

Hello Dan The Weapon bay seems to be very simple, take a look on the Real one how it looks like Regards Bekim

So meanwhile I am working on the wheel well and on the center line fuel tank....

I took the drawings and cross sections from here , and it looks nice ....

Hello Foxhead Thanks for the information, the comparison with Samedows pic... But in my opinion , it seems that its too long.... Here how the real one looks like....

so, about 60% done....

view from below... 2 options , closed and open

here is the actuall status, I add most of the panel lines .....

it will still take a long time until done.....

back area , still in progress....

Hi Gents about 40-50 % done...

Nice evening Gents I decided not to do the PD version, it will be the M Version. the main components in Progress

Salü Alain for the YF-23 , I have to cast the canopy with clear Resin, and then its done Bekim

Good Morning gentlemen The Foxbat, what a lovely beautiful Aircraft it is , there are some nice kits on the market in 1/48 from ICM , and I thoght myself, what a Pitty that this Diva doesnt exist in 1/32 So what to do.....Lets do it in 1/32 , it will be the PD Version , doing the cad datas will take a while ........ best Regards Bekim

Salü I am in contakt with HAHEN and Cartograph, as soon available I will post it, here a Pic of the Alpha Jet how it looks like for the moment