Jump to content


Photo

1/48 Eduard Bf 109G-5 Maj. Walter Dahl, December 1943


  • Please log in to reply
20 replies to this topic

#1 Kahunaminor

Kahunaminor

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 899 posts
  • Gender:Male
  • Location:Kiama, NSW, Australia

Posted 11 April 2018 - 10:48 AM

As the Airfix P-51D draws to a close, I am taking a step back into more familiar territory with a Luftwaffe build. I have espoused the merits of the Eduard line Bf 109’s but I have yet to actually crack a late war kit. I will remedy that with this build. The kit was given to me as a gift by a friend so I am keen to make it worthwhile. I have added some extras in the form of a BRASSIN sets and Maketar masks:

684_AED2_D-26_EA-406_E-859_C-28_A6_A4346

07_E8_B7_F8-_DBC1-448_C-_AE08-4191_DF9_C

7_E82_B913-_C0_E4-45_DC-8082-4834_A10_FF

FA5641_DD-_F779-4389-_B470-_FD3_B1_E3144

7396_A714-5295-4_C85-_AB83-_AB2280_EEB67

I started as I normally do and coated all the PE in Tamiya Metal Primer. There is a lot of frets from the cockpit set and additional sets:

5_D9418_C7-333_F-492_B-8_F46-3_FA2_D39_C

I then started in the resin cockpit, carefully rinsing the resin and giving it a base coat of Aeromaster RLM 66 when it had dried:

48548_EF4-31_A5-45_CD-_AD9_E-3_B9594_AFD

The first construction began with the seat, central cannon mount, forward cockpit firewall and rudder pedals (which are comprised of one resin and three PE pieces!):

B70_D3923-_CFC1-4567-9174-5_CEB69_E11_B8

DB36_B1_A4-0_E22-4_B0_F-_BBE4-07460_A51_

77_E13_AF4-0_EE8-4842-89_A6-_BE8_C1_EA8_

420_ADB78-891_E-45_C7-_B58_A-4_BCBDEDA16

The toe straps will go on as the third piece of PE and the pedals will be lightened as per John Kim’s build. After all that effort, they deserve to get noticed!

Regards,
  • LSP_Kevin, Lud13, harvey and 5 others like this
Kent in Oz
LSP in progress: Tamiya Spitfire XVIe
LSP completed: Eduard Bf109E-4; Hasegawa Bf109G-6; Revell Fw190D

#2 ade rowlands

ade rowlands

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 1,076 posts
  • Gender:Male
  • Location:Buckley, UK

Posted 11 April 2018 - 02:40 PM

I've slowly been gathering bits and pieces to do this scheme with the 1/32 Revell kit so I'll follow along. The photos arent working for me though. 



#3 mustang1989

mustang1989

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 452 posts
  • Gender:Male
  • Location:Coastal Bend in Texas

Posted 11 April 2018 - 04:40 PM

applause-1_zpselljg9zp.gifapplause-1_zpselljg9zp.gifapplause-1_zpselljg9zp.gif


  • harvey likes this

#4 Kahunaminor

Kahunaminor

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 899 posts
  • Gender:Male
  • Location:Kiama, NSW, Australia

Posted 11 April 2018 - 10:32 PM

I've slowly been gathering bits and pieces to do this scheme with the 1/32 Revell kit so I'll follow along. The photos arent working for me though.


Apparently Postimage is having an issue:

A75_DA032-_C68_B-4464-9114-03_BE81_B6019

Regards,
Kent in Oz
LSP in progress: Tamiya Spitfire XVIe
LSP completed: Eduard Bf109E-4; Hasegawa Bf109G-6; Revell Fw190D

#5 Gazzas

Gazzas

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 2,704 posts
  • Gender:Male
  • Location:Queensland, Australia

Posted 11 April 2018 - 11:51 PM

Kent,

   Nice to see you starting another.   Looking forward to it.  Nice start on the cockpit.

 

Gaz


​We don't have social skills.  We build models.


#6 Kahunaminor

Kahunaminor

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 899 posts
  • Gender:Male
  • Location:Kiama, NSW, Australia

Posted 19 April 2018 - 03:15 AM

Thanks buddy, I am liking your work on the Tamiya/Eduard G.

School holidays and spending time with the kids (away from their devices) lowers my work rate. I am slowly getting the cockpit together. I am as yet undecided whether I will use the PE or resin and d cal version of the IP. I did make the PE one up this morning and it does look good bit I want to see how the decal performs. I have added some PE bits and bobs. It is the first time I have opted for PE belts in quite a while, having been put off by the problems associated older style of belt. The BRASSIN set contains the new steel belts and I am impressed. They are far easier to remove, place and seem mostly to retain their painted aspects. There is some touch up needed but that may be me. In 48 scale at least, they look quite good but I think I will stay with textile from RB or HGW for the big scale whenever I get back there. Anyway, some photos:

99_DA872_C-_A7_CC-455_B-_BACC-92_BAA70_D

B6961_A53-_BC67-4_BD2-_BC6_C-643_B0181_C

C8_B70_CDB-_F3_B6-4_C93-8469-68_A44_BE3_

Regards for now,
  • LSP_Kevin, mustang1989, tucohoward and 1 other like this
Kent in Oz
LSP in progress: Tamiya Spitfire XVIe
LSP completed: Eduard Bf109E-4; Hasegawa Bf109G-6; Revell Fw190D

#7 Gazzas

Gazzas

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 2,704 posts
  • Gender:Male
  • Location:Queensland, Australia

Posted 19 April 2018 - 06:22 AM

Kent,

   Nice work!

 

After 'only' painting cockpits, decals are a huge improvement.  I wish there were more cockpit and wheel well stencils out there.

 

Gaz


​We don't have social skills.  We build models.


#8 Blackcollar

Blackcollar

    LSP Junkie

  • LSP_Members
  • PipPipPipPip
  • 161 posts
  • Gender:Male
  • Location:Victoria, BC, Canada

Posted 20 April 2018 - 05:42 AM

Beautiful work



#9 Kahunaminor

Kahunaminor

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 899 posts
  • Gender:Male
  • Location:Kiama, NSW, Australia

Posted 20 April 2018 - 07:19 AM

Many thanks gents,

I think this is shaping up to be a good build. Actually using the bigger magnification on the optivisor and some good light has made th8ngs come into “focus”.

Working slowly, getting the cockpit assemblies detail painted and now gloss coated for decals and a wash. I have decided to use the PE IP as the resin/decal attempt just really didn’t work. The gunsight has been added and it’s PE as well. The detail the PE from the BRASSIN sets add is just brilliant. You cannot really see it at the moment but once I detail it and add the glass it will show.

5_C23_ED72-01_BA-42_A8-89_F3-0_F5409938_

F15_D2_A9_C-_AE52-431_B-9_C10-_A46_EADF1

39022_F0_D-_A5_BF-41_A5-9_D62-5_DD62_DD0

Whilst the gloss coat dried, I turned my attention to the fuselage. I took to the sidewall details with my faux Dremel, removing the detail to allow the resin to fit. I got a little over enthusiastic in a couple of spots and broke through the exterior. Thankfully both times was under the beules and they will be covered.

6_B5_C2_F36-3_D05-4_C1_D-_BAB4-06_E80130

E9558920-9587-4_E7_A-_A30_B-3_B1_A4_F87_

0_C2_D8910-29_BE-4_A28-9578-_E41_B94_C29

I set about joining the fuselage, starting from the rear and gluing the tail and forward to the cockpit and lower wing join. I let that set up then did the area under the forward cowl, finally the upper cowl and just forward of the cockpit. I made sure to give the seams a little time to set up between applications in an attempt to get that “perfect minimal seam.” I came close. I then added the upper tail section and the beule to hide my over eagerness:

F5_E25_CCA-5624-4_E1_A-854_C-0721_EA4_FE

8356_EBC8-454_C-46_E2-_BA7_E-_D8_F488_D3

6_A1_C568_D-_FD3_F-491_F-9_BAE-_ACCE499_

7_B65_F9_B3-3_F4_E-4_E8_B-_ABED-22_D72_D

The coamings on each side of the cockpit also got a coat of RLM66.

Regards
  • LSP_Kevin, mustang1989 and tucohoward like this
Kent in Oz
LSP in progress: Tamiya Spitfire XVIe
LSP completed: Eduard Bf109E-4; Hasegawa Bf109G-6; Revell Fw190D

#10 Gerhard

Gerhard

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 1,461 posts
  • Gender:Male
  • Location:South Africa

Posted 20 April 2018 - 08:00 AM

Epic. That is some good work. 



#11 Gazzas

Gazzas

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 2,704 posts
  • Gender:Male
  • Location:Queensland, Australia

Posted 20 April 2018 - 08:35 AM

Kent,

   A bit of good luck where you broke through.  A few years ago I got the Dremel stand to go with the Dremel I bought for general household usage.  The stand allows me to hold a part with both hands while the Dremel whirrs away plastic with an engraving bit at it's lowest speed of 5k RPM.

 

I've found freehand with the Dremel is for me, a recipe for disaster.

 

Gaz


  • Kahunaminor likes this

​We don't have social skills.  We build models.


#12 Kahunaminor

Kahunaminor

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 899 posts
  • Gender:Male
  • Location:Kiama, NSW, Australia

Posted 20 April 2018 - 08:48 AM

Kent,
   A bit of good luck where you broke through.  A few years ago I got the Dremel stand to go with the Dremel I bought for general household usage.  The stand allows me to hold a part with both hands while the Dremel whirrs away plastic with an engraving bit at it's lowest speed of 5k RPM.
 
I've found freehand with the Dremel is for me, a recipe for disaster.
 
Gaz


Yes, I can attest to free hand Dremel being fraught with danger in a previous build. My faux one has a flexible extension shaft so it makes it a bit easier to handle and I think it has a slower rpm. It is adjustable from 1-6 but I rarely if ever go above 3.

Regards,
  • Gazzas likes this
Kent in Oz
LSP in progress: Tamiya Spitfire XVIe
LSP completed: Eduard Bf109E-4; Hasegawa Bf109G-6; Revell Fw190D

#13 Bomber_County

Bomber_County

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 1,199 posts
  • Gender:Male
  • Location:Lincolnshire UK

Posted 21 April 2018 - 04:31 PM

I have this G5 in the stash albeit without all the AM. Hitting the follow button now, this will be first 109 for 45 years........
  • Kahunaminor likes this
Phil.

LSP - On the bench - Tamiya Birdcage, SH Tempest V - hi tech
LSP - Stash - Tamiya Mosquito, Revell Ju87B, 1/24 P51D Mustang, WnW “Ships” Camel

#14 mustang1989

mustang1989

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 452 posts
  • Gender:Male
  • Location:Coastal Bend in Texas

Posted 23 April 2018 - 04:39 PM

Very convincing pit and good progress overall Kent. 



#15 Kahunaminor

Kahunaminor

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 899 posts
  • Gender:Male
  • Location:Kiama, NSW, Australia

Posted 26 April 2018 - 05:55 AM

Thanks Gents,

Some progress in that the cockpit has been installed. It didn’t go as flawlessly as I had hoped. At the same time the sidewalls revealed the little seam issue, I recalled I had the same issue on my Bf 109E-7. Not to be outwitted, I filled the seams with some thinned styrene sheet and will level and repaint:

248_A026_A-1_A48-4467-96_D4-90_DA7_E0_C8

7_C362363-_AFE5-43_E9-_B5_FB-_FA126260_F

The steely eyed amongst you may have detected the flash of white on the starboard side, below the cockpit. I had another small break through. I pondered how the repair it then just shoved some styrene card to fill the hole, applied Tamiya Extra Thin and waited until it was dry. Then simply a matter of trimming the excess:

BF572278-3_AAA-4_D3_E-856_A-_D4232_BAC9_

Here’s an overexposed shot to get that interior detail:

88868_D66-_EC2_F-4229-87_DC-2_C6_AF0_CCF

I then turned to the lower wings and competed the task of assembling the PE in the wheel bays. I also marked out the holes I would need to drill, in a manner I would not easily forget:

B41_D2_E08-3_BA2-4_CBA-80_C7-8_ADE2_E23_

DB87_BA04-62_D2-4_E6_E-9_E81-8_D481355_A

Finally for this update, there is some moulded detail on the upper and lower edges of the exhaust openings that was removed with a micro chisel to facilitate the PE shroud guards:

491_AF2_FF-4814-4_D41-9_AA2-041_C7_B0_F7

D62758_A9-952_D-4353-9_D92-4873419_C7_DD

It has been tidied up a bit more since the photo. Working on the underwing cannon gondolas, drop tank and the MLG before bringing out the RLM 02.

Regards,
  • TorbenD likes this
Kent in Oz
LSP in progress: Tamiya Spitfire XVIe
LSP completed: Eduard Bf109E-4; Hasegawa Bf109G-6; Revell Fw190D




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users