Jump to content


Photo

MiG-3 Spinner and Prop from Fusion Models


  • Please log in to reply
23 replies to this topic

#1 Alain Gadbois

Alain Gadbois

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 354 posts

Posted 21 May 2018 - 03:49 AM

Hi all!

I am happy to present the latest release from Fusion Models, a resin spinner and prop set for the Trumpeter MiG-3 kit. This kit is quite nice, with few flaws. The most notable for me is the propeller which is incredibly thick. The spinner can also be improved by correcting the position of the panel line and rivets.

 

Here are the original kit parts:

 

OwiEQ0F.jpg

 

And a comparative view showing the much thinner prop blade and the new spinner. Note the presence of raised and engraved rivets.

 

jpD91jC.jpg

 

The new propeller blades also have slightly more rounded tips, as I observed when studying various photos. The Fusion part is at top.

 

th87cw4.jpg

 

Here is the complete set:

 

c1U1fjA.jpg

 

I have taken much care to design the set so it will be very easy to assemble. Each blade fits in a slot insuring correct angle and pitch. No drilling or jig is required.

 

8MXOyle.jpg

 

At the back, a pin is of the exact diameter to fit in the corresponding hole at the front of the fuselage.

 

YuctYIA.jpg

 

The MiG-3 is one of my favorite WWII fighters, with its racer looks. This set will certainly improve the appearance of the Trumpeter kit with little extra effort. I have given a set of the parts to my graphic artist today and he should complete the instruction sheet at the end of the week.

Any comments or questions are welcome.

Thank you in advance for your interest!

 

Regards,

Alain Gadbois

Fusion Models


  • Kagemusha, LSP_Kevin, LSP_Paul and 5 others like this

#2 LSP_Kevin

LSP_Kevin

    Senior Member

  • Administrator
  • 41,166 posts
  • Gender:Male
  • Location:Melbourne, Australia

Posted 21 May 2018 - 04:18 AM

That looks fantastic, Alain! Can you tell us where and how to order it, and how much it will be?

 

Kev


  • Alain Gadbois likes this

#3 LSP_Typhoonattack

LSP_Typhoonattack

    Senior Member

  • LSP Moderator
  • 26,843 posts
  • Gender:Male
  • Location:St Louis, Mo

Posted 21 May 2018 - 04:26 AM

Very nice indeed. I've considered grabbing the Trumpeter kit for some time now, and this looks like a great addition.


  • Alain Gadbois likes this

Kevin

I was going to procrastinate tonight, but decided to wait.

 

In Progress:

 

 

 

 


#4 Troy Molitor

Troy Molitor

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 1,738 posts
  • Gender:Male
  • Location:Singapore

Posted 21 May 2018 - 08:11 AM

Well done!  Looks fantastic Alain. 

 

Troy


  • Alain Gadbois likes this

#5 dora9

dora9

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 598 posts
  • Gender:Male
  • Location:Montreal, QC, Canada

Posted 21 May 2018 - 12:02 PM

Nice job Alain! I'm in for a set!


  • Alain Gadbois likes this

Andre Dorion

 

P1050144_zps9370ed62.jpg


#6 Out2gtcha

Out2gtcha

    Senior Member

  • LSP Moderator
  • 23,011 posts
  • Gender:Male
  • Location:Omaha, NE US

Posted 21 May 2018 - 04:35 PM

Looks good!  My question as to what was wrong with the OOB part now answered 


  • Alain Gadbois likes this

#7 Iain (32SIG)

Iain (32SIG)

    Senior Member

  • LSP Moderator
  • 7,595 posts
  • Gender:Male
  • Location:Cotswolds, UK

Posted 21 May 2018 - 04:45 PM

Wish this had been available when I built mine - prop in the kit is one of the things I spent the most time trying to improve - kit blades are very chunky!

 

Looks really good.

 

Iain


  • Alain Gadbois likes this

1280-4.jpg

 

Iain Ogilvie - http://www.aeronut.co.uk
 


#8 Alain Gadbois

Alain Gadbois

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 354 posts

Posted 22 May 2018 - 03:10 AM

Hi all!

 

That looks fantastic, Alain! Can you tell us where and how to order it, and how much it will be?

 

Kev

The price of the set will be $14.50 USD, and I will update you as soon as possible as to where it will be available. I glad you like it Kev, I worked hard to get the shapes right.

 

 

Very nice indeed. I've considered grabbing the Trumpeter kit for some time now, and this looks like a great addition.

The Trumpeter kit is quite nice actually, and the problems in the cockpit area have been shown in a very interesting build by "Hacker" here in LSP.

 

 

Well done!  Looks fantastic Alain. 

 

Troy

Thank you Troy!

 

 

Nice job Alain! I'm in for a set!

Good! You haven't built one yet Andre? Great looking plane and see the Soviet Warplanes site for camo options.

 

Looks good!  My question as to what was wrong with the OOB part now answered 

Thanks.I think the spinner and mostly the prop are the only big deceptions in this kit. The rest is some overdone rivets in places but this can be filled/sanded down and some improvements in the cockpit area as mentioned above.

 

Wish this had been available when I built mine - prop in the kit is one of the things I spent the most time trying to improve - kit blades are very chunky!

 

Looks really good.

 

Iain

 

Thanks Iain! I ordered this kit around Christmas and this problem was obvious upon opening the box. I immediately decided to fix this with this new set. Sorry it is too late for you...


  • LSP_Kevin likes this

#9 dora9

dora9

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 598 posts
  • Gender:Male
  • Location:Montreal, QC, Canada

Posted 22 May 2018 - 12:12 PM

I did one in 1/48 with one of your prop, but in 1/32 I was looking on the net to get a nice paint scheme and found one on the Soviet Warplanes site, so all I need now is a good prop!


Andre Dorion

 

P1050144_zps9370ed62.jpg


#10 Gigant

Gigant

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 832 posts
  • Gender:Male
  • Location:South Louisiana

Posted 22 May 2018 - 03:28 PM

Wow!

 

The job you've done with that unit now suddenly makes me interested in buying another Trumpeter kit!

 

I really like that bird's race-plane look.


  • Alain Gadbois likes this

:innocent: Tom

My photo album: https://www.flickr.c...1984@N04/albums

 


#11 Alain Gadbois

Alain Gadbois

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 354 posts

Posted 22 May 2018 - 05:36 PM

Good news!

 

The set will be available from Ultracast next week as well as the new Soviet Hex Tarmac Sections released previously. When I get the instruction sheets for the MiG-3 next week end, I will ship them their order immediately. 

 

 

I did one in 1/48 with one of your prop, but in 1/32 I was looking on the net to get a nice paint scheme and found one on the Soviet Warplanes site, so all I need now is a good prop!

The 1/48 set for the ICM kit was a big improvement too, and I am looking forward to see your 1/32 MiG!

 

 

Wow!

 

The job you've done with that unit now suddenly makes me interested in buying another Trumpeter kit!

 

I really like that bird's race-plane look.

Thanks! It is to me one of the most exciting looking WWII planes. And it is great value for the money even with the resin prop and spinner set. 

 

I will keep you posted when the sets actually ship next week.

Regards,

Alain



#12 dora9

dora9

    Senior Member

  • LSP_Members
  • PipPipPipPipPipPip
  • 598 posts
  • Gender:Male
  • Location:Montreal, QC, Canada

Posted 22 May 2018 - 06:22 PM

In the near future, first I have to finish my Bugatti 100P!


  • Alain Gadbois likes this

Andre Dorion

 

P1050144_zps9370ed62.jpg


#13 Alain Gadbois

Alain Gadbois

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 354 posts

Posted 01 June 2018 - 06:17 PM

Hi all the order for Ultracast will ship today so the sets will be available from then at the start of next week!

Here is the set and its contents:

 

LE8LdQb.jpg

 

mD7Lnzg.jpg

 

Again, they will also have the new Hex bases in stock, so see if you have a MiG or Sukhoi that needs to be parked somewhere!

 

Regards,

 

Alain


  • dora9, Kagemusha and LSP_Kevin like this

#14 Alain Gadbois

Alain Gadbois

    Hooked For Life

  • LSP_Members
  • PipPipPipPipPip
  • 354 posts

Posted 07 June 2018 - 03:29 AM

Hi all,

 

Just to say that the MiG-3 Spinner and Prop set and the Soviet Hex tarmac sections are now available from Ultracast.

 

Regards,

 

Alain


  • LSP_Kevin and Out2gtcha like this

#15 Kagemusha

Kagemusha

    Senior Member

  • LSP Moderator
  • 10,587 posts
  • Gender:Male
  • Location:Mancunia

Posted 07 June 2018 - 08:26 AM

The Mig 3 set is already out of stock...  :shrug:

 

Will you be supplying them to any retailers in Europe?


  • Alain Gadbois likes this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users