JeepsGunsTanks Posted January 10, 2023 Share Posted January 10, 2023 I think this kit has been on my shelf for over 20 years. Time to build it, and the Tamiya -1 or -1A Corsair will be next. All the paint, but the paint, I will paint the outside with is ordered. Not sure what brand I will do it with. Probably Tamiya stuff, but I kind of want to try the Ammo by Mig color set they do. LSP_Kevin, chrish, Gazzas and 10 others 13 Link to comment Share on other sites More sharing options...
chrish Posted January 10, 2023 Share Posted January 10, 2023 Haha I’ve had mine in the stash for about that long as well….I take it out and caress it now and then awaiting the confidence to try building it, I shall tune in to your build and enjoy the show! maybe I’ll work up the nerve to build mine. But as long as it remains in the box in the stash it maintains its full potential. Link to comment Share on other sites More sharing options...
JeepsGunsTanks Posted January 10, 2023 Author Share Posted January 10, 2023 2 minutes ago, chrish said: Haha I’ve had mine in the stash for about that long as well….I take it out and caress it now and then awaiting the confidence to try building it, I shall tune in to your build and enjoy the show! maybe I’ll work up the nerve to build mine. But as long as it remains in the box in the stash it maintains its full potential. That's why I kept it when I got rid of the rest of my stash! It really seems like a very well done kit. I can't wait to try the gear out! It comes with grease! After dealing with Tank photo etch the stuff in this kit seems much more strait foreword. I think the only aftermarket thing I may get is masking I don't have to cut. When I get the Corsair, I may get some of those 3D decal things for the cockpit. I'm going to place a pilot in this one and make it look like its in flight most of the time. I got a bit of a look from the wife at the cost of the paint. There isn't that much cross over between tanks and planes it seems. There is a fair amount between this kit and the Corsair kit so I have that going for me. The decals look pristine, so I think I'm going to build it as the based out of Rabaul. Link to comment Share on other sites More sharing options...
Juggernut Posted January 10, 2023 Share Posted January 10, 2023 (edited) The Tamiya zero is a great kit but is a little gimmicky with movable control surfaces. Word of caution…. Be extremely careful when you “play” with the landing gear. They will break in spite of their seemingly robust construction. My advice is to build the kit either gear up or gear down and leave it that way. I’ll be building the same kit. I’ll be starting it in a day or two. Mine’s not going to be a typical A6M5 though. I have a placeholder for the build thread a few topics down. As you’ve chosen to do, mine will be marked as part of the Rabaul Air Force as well. Edited January 10, 2023 by Juggernut JeepsGunsTanks 1 Link to comment Share on other sites More sharing options...
Greif8 Posted January 10, 2023 Share Posted January 10, 2023 I have this kit in the stash as well. Having built the A6M2b a few years ago I think this kit will also be a fun build for you. Tim (Juggernut) is right about the landing gear. That and the decals were the only to areas that were not top rated on the A6M2b kit. Looking forward to following your build. Ernest JeepsGunsTanks 1 Link to comment Share on other sites More sharing options...
JeepsGunsTanks Posted January 25, 2023 Author Share Posted January 25, 2023 I have started! I was going to post these Sunday, but, Comcast decided I didn't need internet! That's all worked out now. My main observation on starting this model is, MAN, this thing is way more delicate than a tank model! Rockie Yarwood, CShanne, MikeMaben and 9 others 10 2 Link to comment Share on other sites More sharing options...
MikeMaben Posted January 25, 2023 Share Posted January 25, 2023 JeepsGunsTanks 1 Link to comment Share on other sites More sharing options...
Greif8 Posted January 25, 2023 Share Posted January 25, 2023 Just like real life man! HaHa! Good start on the build! Ernest JeepsGunsTanks 1 Link to comment Share on other sites More sharing options...
JeepsGunsTanks Posted January 30, 2023 Author Share Posted January 30, 2023 Slightly more progress. I keep trying to paint as much as I can on the sprue. I'm about ready to cut the two fuselage halves from the sprue, and add the little bits on. I did cut the little round part holds a little poly ring in place. I got the prop paint started. It's the same color I'm using for the leather strapping and boots on the Tanks models, so when I paint those, I hit the prop. I figured out, the paint you mix for one section of the tail, also will go other places and tried to use all that I mixed. The Engine looks so neat! I can't wait to put it together. I'm not sure I'm going to add plug wires, not sure I can pull it off yet. Maybe if I get a set of reading glasses. I had way less time this weekend than I had hoped, I'm going to try and put at least a half hour in each night durring the week. hworth18, MikeMaben, mywifehatesmodels and 8 others 11 Link to comment Share on other sites More sharing options...
Greif8 Posted January 30, 2023 Share Posted January 30, 2023 The cockpit color looks very good. Hope you are able to get in more bench time soon. Ernest JeepsGunsTanks 1 Link to comment Share on other sites More sharing options...
JeepsGunsTanks Posted February 13, 2023 Author Share Posted February 13, 2023 I'm on hold until my Godhand nippers come in. I need the good stuff for something this delicate! themongoose, CShanne, MikeMaben and 1 other 4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now