tomprobert Posted November 28, 2022 Share Posted November 28, 2022 Morning all, Like 99% of those who enjoy building large scale Phantoms, I've been eagerly awaiting a 1/32nd scale RR Spey powered version for as long as I can remember. There is of course the Wild Hare conversion that usually sells for more than my car is worth (on the rare occasion one actually comes up for sale) and rumours are abound that HK were looking at doing one, but I thought life's too short to wait around any longer and it's time to start hacking about at the classic Tamiya F-4J kit. Before I go any further, it's important to say that this is not going to be wholly accurate and the majority of this is being done with the MkI eyeball and approximate measurements. I'm simply not interested in this (or any of my models for that matter!) being accurate to the nearest half-mill, and therefore what you'll see is something that (hopefully) will look like a British Phantom but won't necessarily be the definitive way to go about such a conversion - you'll need to check @Anthony in NZ's rather epic thread for that! I wasn't going to run a WIP for this as I was concerned about burn-out and failure, but I've actually come a lot further in a short space of time that I had initially anticipated, and I think broken the back of this conversion, so thought I'd share my efforts just in case there's someone else out there considering the same thing... I thought I'd begin somewhere nice and simple, so tackled the belly of the beast and the inlet doors on the underside. The UK Phantoms have these further forward than the US examples, so it was a case of cutting out the new doors in their forward position, and filling the old ones with plastic card blanks: These were then filled, re-scribed and given a quick squirt of primer: Step one complete! The next step was the far trickier intakes. The Speys demanded more air and thus the intakes were significantly wider than the US versions. There is much debate and head-scratching about how exactly the shapes differ, but I've done a bit of digging around and modified mine as I see fit. In 1/32nd scale, my calculations work out that the intakes are roughly 3mm wider at the front than the US examples. Therefore, I sourced some 3mm strip and carefully cut the kit intake sections in half, front to back, adjacent to the grills on the inner edges of the intakes (the pictures will explain this better). Here you can see how much wider the UK version intakes are than the US version - quite a significant gap emerges when test fitted to the unmodified rear sections: To remedy this, the fuselage will of course need widening too, and the shaded area in the picture below shows the section in need of modification: To do this, horizonal cuts are made along the top of the intake trunking, with vertical cuts made to allow the section to be opened up. There is a lower horizontal cut, too, made at the wing root to allow to original kit fixings to mate together for strength whilst allowing the wider intake to slot over the upper wing surface: A wedge of plastic card in then inserted, with the forward-most part being 3mm in width to match the modified intakes: Lots of reinforcement was given to the interior too: I'm going to use FOD guards on mine as life is too short to tackle the notorious intake interiors on this kit, but if you were to have them open a further 'wedge' would be needed to plug the gap seen above. Before I went any further, I wanted to check the modified fuselage would allow the wings to fit - which by luck more than careful calculation they did! The modified intakes were then test-fitted to the modified fuselage: Before they were glued firmly into place and allowed to set for 24 hours: The join wasn't perfect but considering the amount of butchery that went on I was pleasantly surprised. Some Milliput White soon made light work of the affected areas: And after some re-scribing and a shot of primer, things look good! You can see in the picture above I have started work on the back end and opened up the extra doors the Spey versions have on the rear fuselage. I'm going a later version with the pod on the top of the fin, so plans were consulted and a rough shape made for these from plastic card laminates: This still needs an awful lot of refining and surface detail added, but it's a good start. I'm now going to have to concentrate on getting the cockpit done and then I can begin hacking about at the rear end. The Spey exhausts are a fair bit bigger than the US ones, so the hacksaw and filler are at the ready! When done, I'll update this again... All the best, Tom Rockie Yarwood, blackbetty, geedubelyer and 29 others 32 Link to comment Share on other sites More sharing options...
spyrosjzmichos Posted November 28, 2022 Share Posted November 28, 2022 Great start Tom! Looking forward to more updates! tomprobert 1 Link to comment Share on other sites More sharing options...
Breaker Posted November 28, 2022 Share Posted November 28, 2022 Tom, you using the 3DP exhausts that you can buy now along with the splitter plates? Anthony in NZ 1 Link to comment Share on other sites More sharing options...
Jim Barry Posted November 28, 2022 Share Posted November 28, 2022 This will be great. Good luck! Still cheering for the Combat Models 1/24 Phantom project too. I added one to my stash this month in my crazy "collect everything 1/24" mission. Derek B 1 Link to comment Share on other sites More sharing options...
Anthony in NZ Posted November 28, 2022 Share Posted November 28, 2022 5 hours ago, Breaker said: Tom, you using the 3DP exhausts that you can buy now along with the splitter plates? LOVE IT!!! Tom, I’m so pleased you’re tackling this monster and so far looks fabulous! Don’t forget Ali does those bits that will save you some time with those engines. What scheme are you after? I might be able to help with spare decals? Or anything else for that matter. Just let me know if I can help cheers Anthony Troy Molitor, D.B. Andrus, Stevepd and 2 others 5 Link to comment Share on other sites More sharing options...
rigor Posted November 28, 2022 Share Posted November 28, 2022 Nice start Tom one has to ask did you ever finish that 1/24 scale monster you started Link to comment Share on other sites More sharing options...
Tony C Posted November 29, 2022 Share Posted November 29, 2022 This can’t be “the” Tom Probert, it’s an injected kit, I don’t think that I’ve ever seen the other Tom Probert do anything but vacforms In all seriousness, regardless of whether or not it’s an a vacform and injected, I’m sure the finished item and modifications, will be up to your stratospheric standards Derek B and Anthony in NZ 2 Link to comment Share on other sites More sharing options...
mozart Posted November 29, 2022 Share Posted November 29, 2022 Love it, well done Tom. tomprobert 1 Link to comment Share on other sites More sharing options...
tomprobert Posted November 29, 2022 Author Share Posted November 29, 2022 21 hours ago, Breaker said: Tom, you using the 3DP exhausts that you can buy now along with the splitter plates? I have the exhaust cans, yes. I haven’t got the splitter plates as, for me, the differences are so small the kit ones will work ok. 19 hours ago, Jim Barry said: This will be great. Good luck! Still cheering for the Combat Models 1/24 Phantom project too. I added one to my stash this month in my crazy "collect everything 1/24" mission. The Combat one is boxed up at the moment to be returned to one day! 15 hours ago, Anthony in NZ said: LOVE IT!!! Tom, I’m so pleased you’re tackling this monster and so far looks fabulous! Don’t forget Ali does those bits that will save you some time with those engines. What scheme are you after? I might be able to help with spare decals? Or anything else for that matter. Just let me know if I can help cheers Anthony Hi Anthony. That’s a kind offer but I already have the Cutting Edge sheet with numerous options. I think I’m leaning towards a red tailed 56 Squadron bird to complement my black tailed F-4J(UK). However, there are so many stunning schemes on that sheet… Black Mike, Alcock and Brown, the two blue machines… Choices, choices! 10 hours ago, rigor said: Nice start Tom one has to ask did you ever finish that 1/24 scale monster you started No… it’s currently in storage. I’m hoping that doing this in 1/32 scale will give me the intimate knowledge of the beast so I can get going on it again. 8 hours ago, Tony C said: This can’t be “the” Tom Probert, it’s an injected kit, I don’t think that I’ve ever seen the other Tom Probert do anything but vacforms In all seriousness, regardless of whether or not it’s an a vacform and injected, I’m sure the finished item and modifications, will be up to your stratospheric standards Ha ha! Very kind, Tony! No pressure then… themongoose and Tony C 2 Link to comment Share on other sites More sharing options...
Derek B Posted November 29, 2022 Share Posted November 29, 2022 Nice work Tom, I'm enjoying this! Derek tomprobert 1 Link to comment Share on other sites More sharing options...
alaninaustria Posted November 29, 2022 Share Posted November 29, 2022 (edited) Wow! What accurate and exacting work as always mate! I had no idea the Brit Phantoms were so different as compared the US versions. Awesome work so far, I look forward to the next updates! Cheers Alan Edited November 29, 2022 by alaninaustria tomprobert 1 Link to comment Share on other sites More sharing options...
MikeC Posted November 29, 2022 Share Posted November 29, 2022 Great start, that's very impressive. Looking forward to the end result. Have you decided on a unit and scheme yet? Link to comment Share on other sites More sharing options...
alaninaustria Posted November 29, 2022 Share Posted November 29, 2022 Quick question, were the Brit Phantoms built like this at the factory in the US or were they modified after by a UK based aerospace firm prior to delivery? That sure seems to be a huge modification from the standard airframe. Cheers Alan …all that for a different powerplant? Why? tomprobert 1 Link to comment Share on other sites More sharing options...
MikeC Posted November 29, 2022 Share Posted November 29, 2022 32 minutes ago, alaninaustria said: Quick question, were the Brit Phantoms built like this at the factory in the US or were they modified after by a UK based aerospace firm prior to delivery? That sure seems to be a huge modification from the standard airframe. Cheers Alan …all that for a different powerplant? Why? Why? In a word that we're not supposed to use, but is inescapable in this case: politics. To put it simply, the government of the day wanted as much British involvement as possible. To discuss the reasons would be straying into that which is (rightly imo) not for discussion on this forum. The British Phantoms were built in the McDonnell-Douglas factory. The model designations in US terms were the F-4K (known as Phantom FG Mk 1) and F-4M (FGR Mk 2). tomprobert 1 Link to comment Share on other sites More sharing options...
alaninaustria Posted November 29, 2022 Share Posted November 29, 2022 Interesting. I get the message… and I assume the Spey needed the modifications to be able to be used in the airframe. So interesting. Did the UK fly these off of carriers too, or just runways? Cheers Alan Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now