Jump to content

Messerschmitt Bf 109 G-10 "Erla"


Sasha As

Recommended Posts

Hello colleagues! I want to present you the model Bf 109G-10 Erla in 32-m.Model was assembled without any problems, except for a few pinholes on the wings, awkward docking of engine bonnet with the fuselage. chassis racks, they had to tinker with. This is probably the bottleneck of the model. I omit the geometry of the model, it is a separate topic... Has begun model did not think that all will appear a little bit more difficult and with a matte part and with a choice of a prototype. As a result having got acquainted with nuances of cars of 10-th series of factory of Earl, has chosen a prototype "White 13" WNr. 151567 of III./JG 300, Wunstorf. There are enough photos of this car. In building of model from additions from present only belts from Edik. all the rest is made independently from improvised materials. I will try to list what was done1 bowl seat made of pivzhesti2 straps on the pedals3 "triangle" on the backrest seat4 dashboard drilled and inserted "instrumentation "5 wiring in the cabin and various trifles6 casing hand pump gasoline pump made on the ream7 cut air intakes in the nose of the engine8 changed the melting on the coca screw9 added royal loop from below on the bonnet engine, respectively, the locks were removed10 place of attachment rear landing gear strut moved11 made hatches out of foil 12 finalize the tank (seams, pipes, tape, drainage) 13 made mechanization of opening the light14 sight made almost new15 on the decking, something added, something removed, again according to those schemes, that I have16 rolled up "rivets "17 finalized the air intake18 made a hose washer windshield19 made hydraulic cylinder rod retract the landing gear with the wiring (hopefully, that I called it right)20 wiring in the niches of the landing gear21 channels made under the plastic drain sleeves22 flaps rod water and oil cooler 23 grooved trailing edges planes24 made trimmers on the elevator 25 draining tubes26 plugged plastic places where the wing and fuselage connect27 racks rolled in foil, because of their atrocious quality28 made brake tubes (total detailing one strut cost 28 parts)28-th item is not a coincidence)))))))29 re-made cable strip for fixing the lantern30 made a spring and a cable fixing lantern31 re-made aerial radio half compass32 tweaked armored header 33 made "bulbs" in the wing AON34 aerial. Except for swastika and small items, all the rest was blown under stencils.  Made to order for this board.Primed with ganza.Painted with Hobby-Color and Tamiya.Lacquer HATAKA and the gloss and coarse.Oil wash.Watercolor pencils,oil,pastel.Exhaust,paints for airbrush.Model built in 2018m.I wish you all an enjoyable viewing experience!photo_19_1537199561.JPGphoto_3_1537199561.JPGphoto_4_1537199561.JPGphoto_5_1537199561.JPGphoto_6_1537199561.JPGphoto_8_1537199561.JPGphoto_9_1537199561.JPGphoto_10_1537199561.JPGphoto_11_1537199561.JPGphoto_12_1537199561.JPGphoto_16_1537199561.JPGphoto_20_1537199561.JPGphoto_25_1537199561.JPGphoto_26_1537199561.JPGphoto_27_1537199561.JPGphoto_28_1537199561.JPGphoto_29_1537199561.JPGphoto_31_1537199561.JPGphoto_32_1537199561.JPGphoto_33_1537199561.jpgphoto_35_1537199561.JPGphoto_36_1537199561.JPGphoto_37_1537199561.JPGphoto_38_1537199561.JPGphoto_40_1537199561.JPGphoto_42_1537199561.JPGphoto_44_1537199561.JPGphoto_45_1537199561.JPGphoto_46_1537199561.JPGphoto_48_1537199561.JPGphoto_49_1537199561.JPGphoto_50_1537199561.JPGphoto_52_1537199561.JPGphoto_54_1537199561.JPGphoto_56_1537199561.JPGphoto_57_1537199561.JPGphoto_58_1537199561.JPG

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...