Paul2660 Posted August 3, 2022 Share Posted August 3, 2022 I would like ideas from others on a "best" primer for resin parts. My current process is to wash the parts with Westley's Bleach Cleaner, sanding them with 800 grit, then spray them with Mr Surfacer 1000 or 1500. Paint I am using is either Mr Paint, AK real colors, (lacquer type), Mr Hobby (lacquer type) and Mission Models Acrylic Problem I have is when masking, the paint will lift off when the tape is pulled off, down to the resin. This seems to happen with any of the paints listed above, more often with the pure Acrylics. Just painted a Eagle Parts FW-190 Cockpit set, used AK real colors RLM 66, and when I pulled off the tape where I was masking the demarcation between RLM 02 and 66, the 66 pulled off down to the base resin. But it also happens on other resin parts I have worked with (veterans models, Barracuda parts etc). I am holding off working on a larger resin kit until I can find a better alternative to the primer solution. Are there other primers, that will bind better to resin, even rattle can brands? Thanks Paul Link to comment Share on other sites More sharing options...
Helmsman Posted August 3, 2022 Share Posted August 3, 2022 Mr.Hobby has a special resin primer in a rattle can. I don't know how well it sticks. Paul2660 1 Link to comment Share on other sites More sharing options...
Paul2660 Posted August 3, 2022 Author Share Posted August 3, 2022 Looks like it was called Mr Resin but it’s been discontinued in both rattle can and jar. Paul Link to comment Share on other sites More sharing options...
rafju Posted August 3, 2022 Share Posted August 3, 2022 did you try Tamiya TS30 as first coat (primer)? Link to comment Share on other sites More sharing options...
Bob MDC Posted August 3, 2022 Share Posted August 3, 2022 My go to primer for most resin and other stuff (3D material) is a quick waft of a car body primer then Mr Primer Surfacer 1500 while the first coat is still damp then cure them off. Luckily I have drying cabinet normally about 40 oC and then cure for several hours, I find the curing is the most important part of priming as we are using this method for treating masters of all types of materials before casting. Bob wunwinglow and ivanmoe 2 Link to comment Share on other sites More sharing options...
Paul2660 Posted August 15, 2022 Author Share Posted August 15, 2022 thanks for the info. Bob, I realize you are across the pond and brands will be different. But on the auto body primer, is it a rattle can? or are you airbrushing it? Paul Link to comment Share on other sites More sharing options...
Confusionreigns178 Posted August 15, 2022 Share Posted August 15, 2022 Hello. As a previous poster has said, rattle-can car-primer from Halfords (or similar, cheaper alternatives, like Holts) stick to just about anything and stay where you spray them. They can be very easily sanded and are much better value-for-money than the "specialized" model-making primers. Hope this helps. Chris. Link to comment Share on other sites More sharing options...
Bob MDC Posted August 15, 2022 Share Posted August 15, 2022 No airbrush, all my priming is by rattle can, normally grey auto primer then Mr Finishing Surfacer 1500 any colour. I've found no real difference in using a can over airbrush, when I was the UK importer for Mr Hobby I had a couple of interesting conversations with some of the technical guys one was very pro rattle can as the GSI Creos heads were very good and as the pigment in the primers were different to paint this could cause wear on the airbrush. So as the day job was a few masters coming through in various states I normally finish all my masters for casting in the combo with lots of happy customers. I find my drying cabinet is the ace for me giving a hard surface to work on if needed. Bob Link to comment Share on other sites More sharing options...
rafju Posted August 16, 2022 Share Posted August 16, 2022 HI Bob Please more precisely, which "grey auto primer can" do you use? something like in the range of Motip primer? Thank you in advance Link to comment Share on other sites More sharing options...
Bob MDC Posted August 16, 2022 Share Posted August 16, 2022 This is the stuff I use https://www.halfords.com/motoring/paints-and-body-repair/primer/halfords-primer-grey-500ml-473116.html UK had another brand Hycote which was very good but the one by Halfords works better for me. Bob rafju 1 Link to comment Share on other sites More sharing options...
blackbetty Posted August 17, 2022 Share Posted August 17, 2022 i use dupli color https://www.amazon.de/Dupli-Color-385889-Spray-Rostschutz-Haftgrund/dp/B005IFID74/ref=asc_df_B005IFID74/?tag=googshopde-21&linkCode=df0&hvadid=308983289890&hvpos=&hvnetw=g&hvrand=7604761093042906922&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9062717&hvtargid=pla-564169157979&psc=1&th=1&psc=1&tag=&ref=&adgrpid=68405949984&hvpone=&hvptwo=&hvadid=308983289890&hvpos=&hvnetw=g&hvrand=7604761093042906922&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9062717&hvtargid=pla-564169157979 (but i dont use amazon, i use the local car acessories shop) Link to comment Share on other sites More sharing options...
Woody V Posted August 17, 2022 Share Posted August 17, 2022 Keep in mind that primer (any paint in fact) sticks better to a rough or sanded surface. Gerhard 1 Link to comment Share on other sites More sharing options...
Gerhard Posted August 18, 2022 Share Posted August 18, 2022 I find Tamiya primer works a treat. Whitey 1 Link to comment Share on other sites More sharing options...
daveculp Posted August 22, 2022 Share Posted August 22, 2022 I've tried Rustoleum primer on resin (3D printing resin) and it never dries. I had to scrape/sand it off which took a week. I switched to Tamiya and have had no problems other than a dwindling bank account. rafju and LSP_Kevin 1 1 Link to comment Share on other sites More sharing options...
LSP_Kevin Posted August 22, 2022 Share Posted August 22, 2022 10 hours ago, daveculp said: I've tried Rustoleum primer on resin (3D printing resin) and it never dries. I had to scrape/sand it off which took a week. I switched to Tamiya and have had no problems other than a dwindling bank account. Same experience for me with Rustoleum and standard polyurethane resin. Rather than remove it, however, I just covered it over with a layer of Mr. Surfacer, and this seemed to fix the issue. Kev Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now