Jump to content

THE SHARK HAS LANDED! Curtiss Tomahawk 112sqn RAF


quang

Recommended Posts

Quote

 

Hi all,

Some say that a modeller‘s life is like city buses. One can wait for a bus for hours, and when one finally comes along, they come in 3 or 4 :P

I’ve been anticipating for the GWH P-40 B/C since it was announced last year. I thought that given the enthusiastic reception, there would sooner or later be a WIP thread dedicated to the subject on this here forum.

I waited and waited …until three weeks ago, I took the plunge and ordered my kit from a Czech shop. Five days later, it arrived. I ripped open the box and started right away… only to find that @Tolga ULGUR beat me to it.

To tell you the truth, I’m not entirely unfamilar with the early Hawk. I scoured the internet for my build of the 1/48 Airfix kit, and learned a lot from the various Curtiss experts. Furthermore I’m currently building a 1/32 French H75, the forefather of the H81. So I felt I was somewhat ready for the GWH.

 

My intention is to build a 112 sqn RAF Tomahawk in early temperate camouflage and sporting one of the original sharkmouths. I’ve studied this scheme for my 1/48 model and will take the opportunity to implement it to the larger scale. Since no decals exist, the markings will be hand-painted à la old-school (no Silhouette).

 

Some views of my 1/48 Airfix. I’ll use the same color scheme for the GWH. Hopefully, with cleaner teeth :P

81-F09-F53-A56-C-4100-BF12-80-E7-B6-B558


2-C66-A315-3997-4536-9876-F642-F19-A6172


62-FA6-D4-A-0-CCB-4879-A87-C-AB49-A8781-

 

This thread is not meant to be a step-by-step WIP per se but rather a log where I’d be gathering notes and impressions (and rants) during the building of this promising kit! I hope some of you will find it at least entertaining and I also welcome your comments and input. The more the merrier.

 

 A VERY brief preview of the kit as all of you know already about it. 
6-C020-AA3-F693-4-B6-E-8333-EFAAAD520-C2



THE PROS: very clean mouldings, realistic surface textures with intricate, accurate details, very precise fit with super-tight tolerance. Very comprehensive decals, thin and well-printed.

THE CONS: the photo-etchings are useless and primitive at best. Paper-thin, easily deformed, devoid of noticeable details. Some etched parts would better be in moulded plastic. The etched radiator grills are commendably thin and subtle if only they can be seen once the kit is completed.

Furthermore the special edition ‘bonus’ -apart from the 3d-printed .303 barrels- are completely useless: a bogus patch (if only had they use a genuine Flying Tigers breast patch), a ‘collector’s card (tell me how many collect 150euro kits), and 2 posters profiles(meh).

I would prefer GWH replace these ‘bonus’ with some etched seat belts and optional US seats and windscreens.

083083-E2-C0-EC-4-F08-9-CA6-E15-E18-B39-

 

Rants aside. Let’s cut plastic.

 

Starting with the cockpit. I prefer to do it the ‘normal’ way. Instead of building a pilot’s cage as GWH proposed, I’d be gluing the right and left sides to their respective fuselage halves. This method would give me a complete view of what’s in store, especially giving the adequate contrast when detailing and painting the cockpit.
5051-C03-F-074-B-4-CC6-86-C8-E3-C8295-B8

 

I added an armour plate ( plasticard) to the bulkhead behind the seat
EE7-BC374-C828-4-C0-E-A73-E-E91169-F4270

 

The original cockpit was painted in an equivalent of RAF Grey-green. I used AK grey-green slightly modified with a touch of blue.
The aft fuselage is painted in a yellow Zinc Chromate. This part is not visible on the completed airframe. I only painted it to give some contrast to the cockpit color.
DD4-A5106-7-FCE-4-F41-97-E6-F0-E33-C642-

 

Cockpit floor (in fact, the top of the wing) painted. Note ‘halo’ effect. Supposed to give some depth to the cockpit. Hopefully :P
1362495-A-9-FED-43-D5-B067-20-B352-ED882
 

 

Seat is painted in a slightly darker green than the rest. As this is a RAF bird, I added a Sutton harness (Eduard p.e.)
CB110-BFE-84-D4-4494-9-AF7-22-D7-EE2-E57

 

Instrument panel waiting for bezel decals.
0-D73-F550-A15-D-4111-AFE7-E113-EE3538-C

 

That’s it, folks.

Questions and comments are heartily welcome!

Cheers,

Quang

 

 

 

Edited by quang
Link to comment
Share on other sites

Great to see you starting this.  I will be following with interest. My kit’s in the mail, and when I get around to it I’m doing a flying tiger straight up - decked out with Chinese nationalist insignia and thoroughly worn out from operating off of primitive airfields with minimal repair parts available.  Glad to see that they did the cockpit floor correctly on this one - that was one of the glaring mistakes with the Trumpeter kit…

Link to comment
Share on other sites

20 hours ago, Tolga ULGUR said:

Great start :popcorn::popcorn:

Thank you Tolga. Yours was not half bad either! ;)

11 hours ago, Kagemusha said:

great choice of scheme.

I like the ferocious look. Mind you some of the sharkmouths were actually smiling :D

 

10 hours ago, Alex said:

Glad to see that they did the cockpit floor correctly on this one - that was one of the glaring mistakes with the Trumpeter kit…

Forget the Trumpeter. According to the experts, GWH ticked all the boxes on this one.

 

9 hours ago, James Rademaker said:

Could you tell me how much the kits cost in US dollars?

I paid the equivalent of 160 USD. Most expensive kit I ever bought but then… you only live twice. :P

Edited by quang
Link to comment
Share on other sites

Thin and well-printed decals are provided for the instruments. A drop of epoxy glue on each bezel finishes off the IP.

44-EBF88-D-A4-BF-4-D2-B-95-A2-4-BCF7-D2-

 

I added a recharging lever handle on the side of each machine gun. But I reckon much of them won’t be visible in the finished cockpit.

B12-F4-CE5-F2-DB-4-D6-A-96-DA-CED084-BC5

 

The export seat provided is a faithful reproduction of the original.

568-D6-A17-2497-4733-B2-FF-055-C4-F8-C5-
picture for info only

 

I just added the leather patch typical of the RAF issue.

2224817-F-2354-4-D2-A-934-B-75-BB3-D0-BD
 

The cockpit sides and instrument panel in situ. OOB except for a few wires and odd bits.

A1-C16-B4-C-8314-41-B9-9-F4-B-BADC1-DD41

 

70-E7-EE13-7-D81-4-C70-8510-A8-C63368-BA

 

35-FDD0-F1-45-B3-42-CF-81-F9-6384470-DB8

 

Next time we’ll finish the cockpit floor and the wing.

Until then, have a nice week-end!

Cheers,

Quang

 

 

 

 

 

Link to comment
Share on other sites

  • quang changed the title to Desert Shark! GWH 1/32 Curtiss P-40B/C 112sqn RAF

TACKLING THE WING presents no problem.
The fit is excellent, the dihedral perfect and the completed assembly rock-hard rigid.  
I have no issue with GWH opening up the gun loading doors but why, oh why make those doors from the flimsy, bendy photo-etched brass.
GWH could have easily done them in plastic and save us the time and effort to back up the brass with plasticard and make them sit FLAT. :BANGHEAD2:

 

F6-F979-B3-9270-4120-B3-B0-5459-AF4-A3-E

 


4-DF95412-38-BC-4255-86-DE-2-C34250-C24-

 

Additional work will require to open up the shell ejection chutes … 
BBA860-ED-7-FC1-432-B-BC04-6-E38-DA3-D97


On the other hand, don’t be over-enthusiastic and fill in the trailing edge of the wing.
There needs to be a slight gap between the landing flap and the upper surface of the wing
BEC46-A89-7-C91-45-DF-A709-FA9-CCFDCE5-B

 

There’s also a hole (camera gun?) in the right wing root which needs to be opened.
BB40-E82-B-E64-B-4-DB8-9194-BB80-A728773

 

The underwing  light also needs to be improved somewhat.
DB0-B2062-B3-AB-44-DB-8-B4-B-341-BC31-C4


The completed wing.
2-F4-D5-F06-D638-4-C82-98-D0-CA8-C2-D0-D


That was the easy part. :rolleyes:

Next time, we’ll tackle something more complex: the nose

11-D09-FE7-6377-4-C96-BB4-C-8-B269477-B3

 

Until then, keep well,

Cheers,

Quang

Edited by quang
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...