Jump to content

****Finished**** 1/32 Great Wall Hobby - P-40 Curtiss Hawk "Flying Tigers"


Tolga ULGUR

Recommended Posts

  • 2 weeks later...

Hello everyone,

Before sharing WIP pictures I would like to clarify some points.

As you can see in the first picture there is an ventral antenna mast . If I m not wrong this was added during restoration of this bird. And it seems that GWB copied this entirely. So I have decided not to use this piece, albeit late. That means some minor work is needed to remove traces of this plugin

 

FHCP-40-10-900x460-A.jpg

 

And secondly the color of both fuselage lights (left and right side) is blue. Is that correct??

Thanks in advance.

 

FHCP-40-15-900x460-A.jpg

Link to comment
Share on other sites

On 5/5/2022 at 4:48 AM, Tolga ULGUR said:

 

 

FHCP-40-15-900x460-A.jpg

 

On 5/5/2022 at 8:53 PM, quang said:

 

919-F8191-A87-F-4146-9-ECE-C4-D1-C32-F99

 

Correct me if I'm wrong, but doesn't that light appear to be in a different location in these two pics? It seems much farther forward on the P-40E. Maybe that is just a difference between the B and E variants?

Link to comment
Share on other sites

29 minutes ago, BiggTim said:

Correct me if I'm wrong, but doesn't that light appear to be in a different location in these two pics? It seems much farther forward on the P-40E. Maybe that is just a difference between the B and E variants?

Indeed the lights were in a different location depending on the version but they served the same purpose. I posted the pic just to show how it looks like. You’d agree it’s a very special kind of blue :P

Link to comment
Share on other sites

Taking good shape, Tolga :clap2:

Just two minor details you’d want to correct:

 

The two filler caps under the side window should be RED (fuel) in front and YELLOW or SILVER (oil) at the rear.
GWH got it wrong with their instructions :rolleyes:

0-F6-CA35-B-6-C03-41-C8-948-F-C2-CD097-D

 

A noticeable difference between the P-40B/C and the later versions is the central seam visible under the chin.
FF0-C46-ED-1294-45-C6-9939-522581-A394-D


They’re very easy to correct and would add much to the finished model.

 

Cheers,

Quang

Link to comment
Share on other sites

1 hour ago, quang said:

Taking good shape, Tolga :clap2:

Just two minor details you’d want to correct:

 

The two filler caps under the side window should be RED (fuel) in front and YELLOW or SILVER (oil) at the rear.
GWH got it wrong with their instructions :rolleyes:

0-F6-CA35-B-6-C03-41-C8-948-F-C2-CD097-D

 

A noticeable difference between the P-40B/C and the later versions is the central seam visible under the chin.
FF0-C46-ED-1294-45-C6-9939-522581-A394-D


They’re very easy to correct and would add much to the finished model.

 

Cheers,

Quang

 

Ahha.. Murpy's finger in charge.

Thanks for the warning @quang

I will fix them.

By the way I have a question about the propeller.  Are the propeller tips of these AVG P-40s painted yellow?

Link to comment
Share on other sites

19 minutes ago, quang said:

Good corrections :clap2:

The resin tyres are great. Which paint did you use for the rubber tailwheel? How did it behave?

Thanks Quang

I used as little paint as possible. First a very light coat of Tamiya german grey and then slightly dirty gray . Finally matt coat of Gunze.

Rubber has not committed any rudeness for this time being

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...