spraying white insignia

[dashotgun]

I was struggling a bit then   too thin paint to many layers it ran raised edge.  Then decided to  do a   faint layer of tamiya fine white  thinned slightly with mr color leveling thinner then  did a final layer with mr color white.  Came out perfectly.  This   was sprayed through a  cameo mask over the camo pattern  

[Woody V]

One trick you can use to hide the edge is spray Gloss Clear over the area and sand with very fine sanding paper/sponge. You can see when the blending is complete when the gloss around the edge is gone. It's an old custom car paint trick and it works.

Some guys paint the insignias on first followed by color and they swear by it. 

[Thunderbolt]

On 3/13/2022 at 3:06 AM, Archer Fine Transfers said:

One trick you can use to hide the edge is spray Gloss Clear over the area and sand with very fine sanding paper/sponge. You can see when the blending is complete when the gloss around the edge is gone. It's an old custom car paint trick and it works.

Some guys paint the insignias on first followed by color and they swear by it. 

I do insignia first. Tamiya fine white primer thinned heavily from the small square jar. Then mask and apply rest 

Edited April 15, 2022 by Thunderbolt